Development non-contact gripper with flowrate-amplification using Coanda ejector
Source abstract
Abstract
Abstract The energy-saving mechanism for the gas consumption of a non-contact gripper with flowrate-amplification using Coanda ejector is proposed to solve the problems of excessive power consumption and an insufficient lifting force in non-contact grippers. The mechanism of the proposed non-contact gripper is derived using pressure differences to generate the lifting force, and the energy-saving principle is described in detail. The effects of the supply gas flow rate and the gap height on the adsorption capacity of the non-contact gripper are studied experimentally. Finally, comparing the proposed non-contact gripper with traditional approaches indicates that the lifting force is 15–20% higher under the same supply gas flow rate. This research provides new ideas for research on non-contact grippers and provides theoretical support for their design.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Refrigeration and Air Conditioning Technologies · Hydraulic and Pneumatic Systems · Mechanical Circulatory Support Devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. A novel gripper for battery electrodes based on the Bernoulli-principle with integrated exhaust air compensation10.1016/j.procir.2014.10.065 ↗
2. Soft-acting, noncontact gripping method for ultrathin wafers using distributed Bernoulli principle10.1109/TASE.2018.2848635 ↗
3. Grasping leather plies by Bernoulli grippers, CIRP Ann-Manuf
4. Examination of the movement of a woven fabric in the horizontal direction using a non-contact end-effector10.1007/s00170-004-2075-x ↗
5. A non-contact end-effector for the handling of garments10.1017/S0263574702004125 ↗
6. An end effector based on the Bernoulli principle for handling sliced fruit and vegetables10.1016/j.rcim.2006.11.002 ↗
7. A Bernoulli principle gripper for handling of planar and 3D (food) products10.1108/01439911011081669 ↗
8. Development of a non-contact end effector for robotic handling of non-rigid materials10.1017/S0263574797000374 ↗
9. Theoretical and experimental study of factors affecting the suction force of a Bernoulli gripper
10. Development of a new noncontact gripper using swirl vanes10.1016/j.rcim.2012.07.002 ↗
11. Optimization of outer diameter of Bernoulli gripper10.1016/j.expthermflusci.2016.03.024 ↗
12. Experimental and theoretical study of dynamic characteristics of Bernoulli gripper
13. Gasdynamic analysis of the Bernoulli grippers interaction with the surface of flat objects with displacement of the center of mass10.1016/j.vacuum.2018.11.005 ↗
14. Orientation modeling of Bernoulli gripper device with off-centered masses of the manipulating object10.1016/j.proeng.2017.04.374 ↗
15. Modeling of Bernoulli gripping device orientation when manipulating objects along the arc
16. Energy efficiency analysis of the manipulation process by the industrial objects with the use of Bernoulli gripping devices10.1515/jee-2017-0087 ↗
17. The analysis of influence of a nozzle form of the Bernoulli gripping devices on its energy efficiency
18. Development of new pressure regulator with flowrate-amplification using vacuum ejector10.1016/j.vacuum.2017.07.033 ↗
19. Study of a diffusion pump ejector10.1016/0042-207X(93)90140-6 ↗
20. Three-dimensional CFD modeling and simulation on the performance of steam ejector heat pump for dryer section of the paper machine10.1016/j.vacuum.2015.09.016 ↗
21. Numerical analysis of spontaneously condensing phenomena in nozzle of steam-jet vacuum pump10.1016/j.vacuum.2011.02.016 ↗
22. Numerical study on the performances of steam-jet vacuum pump at different operating conditions10.1016/j.vacuum.2010.03.001 ↗
23. A novel gripper for limp materials based on lateral Coanda ejectors10.1016/j.cirp.2008.03.119 ↗
24. Waltham · Am. J. Phys. · 2002 · 71 · 17610.1119/1.1524162 ↗