journal article·2021-05

Regularities of PLA mechanical property modification under ion implantation conditions

I.V. Vasenina, O.A. Laput, I.A. Kurzina

Vacuum· Volume 187
Publisher page

Abstract

Abstract The investigations of the surface physicochemical properties of polylactic acid (PLA) modified by argon, carbon and silver ion implantation to fluences of 1∙1014, 1∙1015 and 1∙1016 cm−2 and energies of 20 keV, 20 keV and 42 keV respectively are described. The projected ion ranges in the polymer matrix are estimated by the computer simulation with the TRIDYN code, as well as energies of electron and nuclear stopping are assessed according to the SRIM modelling. The microhardness and elastic modulus are established to be dependent on the degree of crystallinity of the material. It was found that the microdistortions and strains of the PLA crystal lattice increase after ion implantation due to the structural alteration and defect formation. Long-range effect expressed as bigger depth of modified surface layer than the ion range in the material is suggested as a result of the radiation-stimulated diffusion and thermal restructuring of the material.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Orthopaedic implants and arthroplasty · Bone Tissue Engineering Materials · Polymer Nanocomposite Synthesis and Irradiation

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. Surface property modification of biocompatible material based on polylactic acid by ion implantation10.1016/j.surfcoat.2020.125529 ↗
2. Effect of silver ion implantation on surface physicochemical properties of composite materials based on polylactic acid and hydroxyapatite10.1016/j.vacuum.2020.109251 ↗
3. Surface property modification of polylactic acid by ion implantation
4. Effect of ion-plasma and electron-beam treatment on surface physicochemical properties of polylactic acid10.1016/j.apsusc.2017.06.112 ↗
5. Low-temperature plasma treatment of polylactic acid and PLA/HA composite material10.1007/s10853-019-03693-4 ↗
6. Cold oxygen plasma treatments for the improvement of the physicochemical and biodegradable properties of polylactic acid films for food packaging10.1111/1750-3841.13172 ↗
7. Effects of gas atmospheres on poly(lactic acid) film in acrylic acid plasma treatment10.1016/j.apsusc.2013.06.078 ↗
8. Microhardness relating to crystalline polymers
9. Kurzina · 2015
10. Upgraded vacuum arc ion source for metal ion implantation10.1063/1.3655529 ↗
11. Brown · 2004
12. Simple and inexpensive time-of-flight charge-to-mass analyzer for ion beam source characterization10.1063/1.2206778 ↗
13. Tridyn — a TRIM simulation code including dynamic composition changes10.1016/0168-583X(84)90321-5 ↗
14. Tridyn - binary collision simulation of atomic collisions and dynamic composition changes in solids10.1016/0010-4655(88)90148-8 ↗
15. Taylor · 1961
16. Odzhaev · 1998
17. The stopping and range of ions in mater10.1016/j.nimb.2010.02.091 ↗
18. Range concepts and heavy ion ranges. (Notes on atomic collisions, II.)
19. Kondyurin · 2014
20. The mechanism of deformation of new perspective polymer composites based on 4-aminostirole at high local voltages//Fizika i tekhnika vysokikh davlenii
21. Study of radiation-stimulated diffusion in filled polyvinyl chloride. Elektronnaya obrabotka materialov
22. Radiation-stimulated diffusion in solids//Zhurnal technicheskoy fiziki
23. The structure of titanium nickelide surface layers formed by pulsed electron-beam melting10.1134/S1063784208070189 ↗