Electron irradiation induced modifications of Ti(1-x)AlxN coatings and related buffer layers on steel substrates
Source abstract
Abstract
Abstract Ti(1-x)AlxN hard coatings were prepared by reactive magnetron sputtering onto steel substrates (51CrV4 – 1.8159) and subsequently exposed for a short-time (~1 s) to high-flux electron beam (EB) treatment. Morphology, composition and the structure of as-deposited and EB treated coatings were investigated using transmission electron microscopy (TEM), secondary ion mass spectroscopy (SIMS) and X-ray diffraction (XRD). It was found that the EB treatment had only a minor influence on the morphology and crystallinity of the Ti(1-x)AlxN phase, however, the stress-free lattice parameter and partly the compressive stress in the coatings were clearly reduced by the treatment. On the other hand, major changes of composition profiles and structure were observed in the metallic buffer layer between substrate and Ti(1-x)AlxN. The observed modifications in the coating-substrate system are explained by rapid heat up and radiation damage due to the fast electron exposure.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · Ion-surface interactions and analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Mechanical and tribological properties of duplex treated TiN, nc-TiN/a-SiNx and nc-TiCN/a-SiCN coatings deposited on 410 low alloy stainless steel10.1016/j.surfcoat.2009.03.009 ↗
2. Single layer and multilayer wear resistant coatings of (Ti,Al)N: a review10.1016/S0921-5093(02)00259-9 ↗
3. Properties of duplex coatings prepared by plasma nitriding and PVD Ti–C:H deposition on X20Cr13 ferritic stainless steel10.1016/S0040-6090(97)00959-0 ↗
4. Effect of prior plasma nitriding applied to a hot-work tool steel on the scratch-resistant properties of PACVD and TiCN coatings10.1016/j.surfcoat.2006.04.064 ↗
5. Hard coatings on thermochemically pretreated soft steels: application potential for ball valves10.1016/S0257-8972(98)00809-3 ↗
6. Microstructure and selected properties of hot-work tool steel with PVD coating after laser surface treatment10.1016/j.apsusc.2008.01.091 ↗
7. Strengthening of ceramic coated steel by laser quenching10.4028/www.scientific.net/AMM.157-158.175 ↗
8. Hybrid technology hard coating – electron beam surface hardening10.1016/j.surfcoat.2007.05.089 ↗
9. Duplex surface treatment physical vapor deposition (PVD) and electron beam hardening10.1002/adem.201300411 ↗
10. Electron beam hardening of PVD-coated steels — Improved load-supporting capacity for Ti1-xAlxN layers10.1016/j.surfcoat.2015.10.077 ↗
11. Effects of electron beam treatment on Ti(1-x)AlxN coatings on steel10.1016/j.vacuum.2014.04.023 ↗
12. Investigations of electron beam hardening on TiAlN coated heat-treatable steel10.1520/MPC20170025 ↗
13. Investigation of cracking prevention in magnetron-sputtered TiAlN coatings during subsequent electron beam hardening10.1016/j.surfcoat.2017.12.042 ↗
14. Modified TiAlN coatings prepared by d.c. pulsed magnetron sputtering10.1016/j.surfcoat.2010.09.023 ↗
15. Formation of Ti2AlN phase after post-heat treatment of Ti-Al-N films deposited by pulsed magnetron sputtering10.1016/j.surfcoat.2011.11.013 ↗
16. Influence of EB parameters on the temperature-time profile during EB hardening as a single or combined surface treatment10.1088/1742-6596/1089/1/012002 ↗
17. Integrating sphere reflectance and transmittance intercomparison measurements for evaluating the accuracies of the achieved results
18. Emission of MCs+ secondary ions from semiconductors by caesium bombardment10.1002/sia.740210408 ↗
19. On the SIMS depth profiling analysis: reduction of matrix effect10.1016/0168-1176(94)04113-L ↗
20. Crystallization of NiSix in a body-centered cubic Structure during solid-state Reaction between an ultrathin Ni Film and Si(001) Substrate at 150–350 °C, cryst10.1021/cg301627y ↗
21. X-ray residual stress measurement in TiN, ZrN and HfN films using the Seemann-Bohlin method10.1016/0040-6090(92)90766-5 ↗
22. Effect of internal Interfaces on Hardness and thermal Stability of nanocrystalline Ti 0.5 Al0.5N coatings10.1007/s11661-010-0204-8 ↗
23. Recent progress and new directions in density functional theory based design of hard coatings10.1016/j.surfcoat.2015.12.021 ↗
24. The scherrer formula for X-ray particle size determination10.1103/PhysRev.56.978 ↗
25. Microstructural design of hard coatings10.1016/j.pmatsci.2006.02.002 ↗
26. Influence of bias variation on residual stress and texture in TiAlN PVD coatings10.1016/j.surfcoat.2005.02.078 ↗
27. Some consequences of the partial crystallographic coherence between nanocrystalline domains in Ti–Al–N and Ti–Al–Si–N coatings10.1016/j.tsf.2006.02.092 ↗
28. Radiation-induced processes in experiments carried out in-situ in the high-voltrage electron microscope10.1002/pssa.2210560116 ↗
29. Radiation damage problems in electron microscopy10.1051/rphysap:01980001502029100 ↗
30. Vacancy-dependent stability of cubic and wurtzite Ti1−xAlxN10.1016/j.surfcoat.2015.05.017 ↗
31. Origin of the nitrogen over- and understoichiometry in Ti0.5Al0.5N thin films10.1088/0953-8984/24/15/155401 ↗
32. Accommodation of non-stoichiometry in TiN1-x and ZrN1-x10.1007/s10853-006-1321-z ↗
33. Residual stresses in nitride hard coatings prepared by magnetron sputtering and arc evaporation10.1016/0257-8972(95)08235-2 ↗