journal article·2021-03

Wetting of SiC by molten Cu–20Me–2Cr (Me=Ag, Mn, Si, and Sn) alloys at 1373 K

Qiaoli Lin, Lu Liu, Hongyu Yang, Liumeng Li

Vacuum· Volume 185
Publisher page

Abstract

Abstract In this work, the effect of the third addition (Ag, Mn, Si, and Sn) on the wettability and the interfacial structures of Cu–20Me–2Cr/SiC systems was investigated. The third addition Me has the obvious effect on the wettability and the spreading dynamics. The sequence of effectiveness is Sn > Ag > Mn > Si. Si Addition can suppress the precipitation of the wettable reaction products, and thus that caused the poor wettability. Although additions of Ag and Mn can improve the wettability significantly, a dissolution zone beneath the reaction layer would be formed. When the third addition Me was thermodynamically repulsive with Si. Meanwhile, the critical concentration of Si in liquid for equilibrium with SiC was less than the corresponding amount of graphite consumed by Cr addition. The dissolution zone would be suppressed. Sn addition satisfied this situation, and thus the best wettability can be achieved. The spreading of Cu–20Me–2Cr/SiC was controlled by the decomposition of SiC rather than the precipitation reaction.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Silicon Carbide Semiconductor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Wetting and bonding of Ni–Si alloys on silicon carbide10.1016/S1359-6454(98)00374-7 ↗
2. Survey on wetting of SiC by molten metals10.1016/j.ceramint.2010.01.001 ↗
3. Wetting of silicon carbide by chromium containing alloys10.1016/S1359-6454(98)00037-8 ↗
4. A study of the wetting, microstructure and bond strength in brazing SiC by Cu-X (X =Ti, V, Nb, Cr) alloys10.1007/BF00352679 ↗
5. A new method of wettability measurement utilizing a small sample and its application to graphite or a-SiC and liquid Cu-Cr alloy systems10.2355/isijinternational.30.64 ↗
6. The critical issues of SiC materials for future nuclear systems10.1016/j.scriptamat.2017.03.001 ↗
7. Wetting behavior and vacuum soldering of novel Au-30Ga solder on Ni and Cu substrate10.1016/j.vacuum.2020.109478 ↗
8. Wetting and interfacial reaction between liquid Ag-Cu-Ti and SiO2f/SiO2 composites10.1016/j.vacuum.2019.109042 ↗
9. Effects of Ti content on the wetting behavior and chemical reaction in AgCuTi/SiO2 system10.1016/j.vacuum.2019.05.014 ↗
10. Mechanisms of reactive wetting: the question of triple line configuration10.1016/S1359-6454(96)00372-2 ↗
11. Study on contact angles of Au, Ag, Cu, Sn, Al and Al alloys to SiC10.1007/BF00372193 ↗
12. Wettability of silicon carbide by aluminum, copper and silver10.1007/BF01730435 ↗
13. The role of compound formation in reactive wetting: the Cu/SiC system10.1016/S1359-6454(00)00235-4 ↗
14. Wettability and interfacial energies in SiC–liquid metal systems10.1007/BF02403656 ↗
15. Eustathopoulos · 1999 · 298
16. Wettability and pressureless infiltration mechanism in SiC-Cu systems10.1016/S1674-4799(09)60059-5 ↗
17. X-ray photoelectron spectroscopy: towards reliable binding energy referencing10.1016/j.pmatsci.2019.100591 ↗
18. Reliable determination of chemical state in x-ray photoelectron spectroscopy based on sample-work-function referencing to adventitious carbon: resolving the myth of apparent constant binding energy of the C 1s peak10.1016/j.apsusc.2018.04.226 ↗
19. Wetting of h-BN by molten Cu-8.8Zr-xTi ternary alloys at 1373 K10.1016/j.vacuum.2019.109147 ↗
20. Fabrication of transparent silica glass by powder sintering10.1016/S1468-6996(02)00030-X ↗
21. Wettability and work of adhesion of nonreactive liquid-metals on silica10.1111/j.1151-2916.1988.tb06407.x ↗
22. Eustathopoulos · 1999
23. Gale · 2003
24. Experimental investigation and thermodynamic description of the constitution of the ternary system Cr-Si-C10.1111/j.1151-2916.2000.tb01513.x ↗
25. Influence of interfacial reaction rates on the wetting driving force in metal/ceramic systems10.1007/BF02663868 ↗
26. The ternary system chromium-manganese-carbon10.1007/BF00938721 ↗
27. Thermodynamic study of oxygen in liquid copper10.2320/matertrans1960.21.275 ↗
28. Spreading of Cu–Si alloys on oxidized SiC in vacuum: experimental results and modelling10.1016/S1359-6454(01)00397-4 ↗
29. Barin · 1995
30. Medema · 1989
31. Wetting of graphite by molten Cu–xSn–yCr ternary alloys at 1373 K10.1016/j.carbon.2019.12.097 ↗
32. Chemical reaction-limited spreading: the triple line velocity versus contact angle relation10.1016/S1359-6454(02)00309-9 ↗