journal article·2021-05Open access

An upgraded ultra-high vacuum magnetron-sputtering system for high-versatility and software-controlled deposition

Arnaud le Febvrier, Ludvig Landälv, Thomas Liersch, David Sandmark, Per Sandström, Per Eklund

Vacuum· Volume 187

Abstract

Magnetron sputtering is a widely used physical vapor deposition technique. Reactive sputtering is used for the deposition of, e.g, oxides, nitrides and carbides. In fundamental research, versatility is essential when designing or upgrading a deposition chamber. Furthermore, automated deposition systems are the norm in industrial production, but relatively uncommon in laboratory-scale systems used primarily for fundamental research. Combining automatization and computerized control with the required versatility for fundamental research constitutes a challenge in designing, developing, and upgrading laboratory deposition systems. The present article provides a detailed description of the design of a lab-scale deposition chamber for magnetron sputtering used for the deposition of metallic, oxide, nitride and oxynitride films with automated controls, dc or pulsed bias, and combined with a coil to enhance the plasma density near the substrate. LabVIEW software (provided as Supplementary Information) has been developed for a high degree of computerized or automated control of hardware and processes control and logging of process details.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Plasma Diagnostics and Applications · Semiconductor materials and devices

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. Review Article: tracing the recorded history of thin-film sputter deposition: from the 1800s to 201710.1116/1.4998940 ↗
2. Physics and technology of magnetron sputtering discharges10.1088/1361-6595/abb7bd ↗
3. High power pulsed magnetron sputtering: a review on scientific and engineering state of the art10.1016/j.surfcoat.2009.11.013 ↗
4. Ionized physical vapor deposition (IPVD): a review of technology and applications10.1016/j.tsf.2006.03.033 ↗
5. 7 - Physics of high power impulse magnetron sputtering discharges
6. A.H. Simon, Chapter 7 - sputter processing, in: K. Seshan, D. Schepis (Eds.), Handbook of Thin Film Deposition (fourth ed.), William Andrew Publishing2018, pp. 195-230.10.1016/B978-0-12-812311-9.00007-4 ↗
7. Magnetron sputtering: a review of recent developments and applications10.1016/S0042-207X(99)00189-X ↗
8. Tutorial: hysteresis during the reactive magnetron sputtering process10.1063/1.5042084 ↗
9. Understanding the discharge voltage behavior during reactive sputtering of oxides10.1063/1.2404583 ↗
10. Upgrading the “Berg-model” for reactive sputtering processes10.1016/j.tsf.2014.02.063 ↗
11. Design, plasma studies, and ion assisted thin film growth in an unbalanced dual target magnetron sputtering system with a solenoid coil10.1016/S0042-207X(99)00177-3 ↗
12. Use of an externally applied axial magnetic field to control ion/neutral flux ratios incident at the substrate during magnetron sputter deposition10.1116/1.577812 ↗
13. Sputter deposition from a Ti2AlC target: process characterization and conditions for growth of Ti2AlC10.1016/j.tsf.2009.11.059 ↗
14. Radio frequency dual magnetron sputtering deposition and characterization of nanocomposite Al2O3–ZrO2 thin films10.1116/1.2171709 ↗
15. Nanocomposite Al2O3–ZrO2 thin films grown by reactive dual radio-frequency magnetron sputtering10.1016/j.tsf.2007.10.001 ↗
16. Face-centered cubic (Al1−xCrx)2O310.1016/j.tsf.2010.11.052 ↗
17. Phase transformations in face centered cubic (Al0.32Cr0.68)2O3 thin films10.1016/j.surfcoat.2012.01.008 ↗
18. Phase composition and transformations in magnetron-sputtered (Al,V)2O3 coatings10.1016/j.tsf.2019.06.019 ↗
19. Microstructure and dielectric properties of piezoelectric magnetron sputtered w-ScxAl1−xN thin films10.1063/1.4714220 ↗
20. Anomalously high thermoelectric power factor in epitaxial ScN thin films10.1063/1.3665945 ↗
21. Effect of ion-implantation-induced defects and Mg dopants on the thermoelectric properties of ScN10.1103/PhysRevB.98.205307 ↗
22. Nanostructural tailoring to induce flexibility in thermoelectric Ca3Co4O9 thin films10.1021/acsami.7b06301 ↗
23. Synthesis and characterization of the mechanical and optical properties of Ca-Si-O-N thin films deposited by RF magnetron sputtering10.1016/j.surfcoat.2017.02.033 ↗
24. Fundamental understanding and modeling of reactive sputtering processes10.1016/j.tsf.2004.10.051 ↗
25. A time-dependent model for reactive sputter deposition10.1088/0022-3727/47/23/235302 ↗
26. Study and simulation of the sputtering process of material layers in plasma10.1515/mcma-2016-0106 ↗
27. Jackson · Thin Solid Films · 1970 · 5 · 20910.1016/0040-6090(70)90095-7 ↗
28. Power systems for reactive sputtering of insulating films10.1016/S0257-8972(97)00032-7 ↗
29. Characterisation studies of the pulsed dual cathode magnetron sputtering process for oxide films10.1016/S0257-8972(01)01058-1 ↗
30. The metal flux from a rotating cylindrical magnetron: a Monte Carlo simulation10.1088/0022-3727/41/20/205307 ↗
31. Monte Carlo simulation of the transport of atoms in DC magnetron sputtering10.1016/j.nimb.2005.09.018 ↗