journal article·2020-10

Preparation of an amphiphobic and electrically conductive coating with mushroom structure on flexible polymer substrate

Wenhui Yao, Oi Lun Li, Liang Wu, Fusheng Pan, Young-Rae Cho

Vacuum· Volume 180
Publisher page

Abstract

Abstract Amphiphobic surfaces are attracting increasing attention because of their extensive applications in self-cleaning surface, water/oil separation, anti-corrosion coating, etc. Nevertheless, the development of amphiphobic surfaces is notoriously difficult, usually requiring both surface microstructure construction and surface energy modification. In order to avoid surface energy modification with expensive and harmful fluorine-containing compounds, a mushroom structure array was formed by sputtering using a target material of silver (Ag) in this study. Without any chemical modification, the developed mushroom structure presented the desired surface amphiphobicity, highly repellent to various solutions with different surface tensions. In particular, a flexible polymer substrate was applied considering the potential popularization of deformable electronic devices in the near future. It was simple to achieve the desired deformable electrode materials via the deposition of Ag film on the flexible polymer substrate. The coating presented good mechanical robustness against the repeated fatigue test, with a minimal change in the electrical resistance after 10000 bending cycles. The superior performances in surface wettability and mechanical test promised the developed materials to be extensively applied as deformable electrode materials with waterproof and anti-fingerprint surfaces in practice.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Surface Modification and Superhydrophobicity · Advanced Sensor and Energy Harvesting Materials · Electrospun Nanofibers in Biomedical Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. Fabrication of durable superhydrophobic Mg alloy surface with water-repellent, temperature-resistant, and self-cleaning properties10.1016/j.vacuum.2020.109172 ↗
2. Superhydrophobic diamond-coated Si nanowires for application of anti-biofouling10.1016/j.jmst.2019.10.040 ↗
3. All-organic superhydrophobic coatings with mechanochemical robustness and liquid impalement resistance10.1038/s41563-018-0044-2 ↗
4. Superhydrophobic coatings for corrosion protection of magnesium alloys10.1016/j.jmst.2020.02.055 ↗
5. Robust superhydrophobic carbon fiber sponge used for efficient oil/corrosive solution mixtures separation10.1016/j.vacuum.2017.03.022 ↗
6. Fabrication and characterization of hydrophobic microarc oxidation/poly-lactic acid duplex coating on biodegradable Mg-Ca alloy for corrosion protection10.1016/j.vacuum.2015.12.022 ↗
7. Mechanically durable superoleophobic aluminum surfaces with microstep and nanoreticula hierarchical structure for self-cleaning and anti-smudge properties10.1016/j.jcis.2015.09.027 ↗
8. Candle soot as a template for fabricating superhydrophobic titanium dioxide film by magnetron sputtering10.1016/j.vacuum.2018.10.014 ↗
9. Designing superoleophobic surfaces10.1126/science.1148326 ↗
10. Fabrication of multifunctional amphiphobic surfaces on copper substrates10.1016/j.colsurfa.2019.06.022 ↗
11. Turning a surface superrepellent even to completely wetting liquids10.1126/science.1254787 ↗
12. Engineering superlyophobic surfaces on curable materials based on facile and inexpensive microfabrication10.1039/C4TA00672K ↗
13. Fabrication of a super-amphiphobic aluminium alloy surface via wire electrical discharge machining and chemical etching technology10.1049/mnl.2016.0569 ↗
14. Superomniphobic and easily repairable coatings on copper substrates based on simple immersion or spray processes10.1021/acs.langmuir.5b00193 ↗
15. Free-standing, flexible, superomniphobic films10.1021/acsami.6b06333 ↗
16. Candle soot as a template for a transparent robust superamphiphobic coating10.1126/science.1207115 ↗
17. Engineering superlyophobic surfaces on curable materials based on facile and inexpensive microfabrication10.1039/C4TA00672K ↗
18. Fabrication of superoleophobic surfaces on Al substrates10.1039/c3ta13807k ↗
19. Effects of substrate temperature on microstructure and tribological properties of Ti-Al-Si-Cu-N films deposited by magnetron sputtering, Rare Metal Mat
20. Magnetron sputtering: a review of recent developments and applications10.1016/S0042-207X(99)00189-X ↗
21. Development of a robust, self-cleaning, amphiphobic, and electrically conductive coating on a flexible polymer substrate10.1016/j.matdes.2019.108023 ↗
22. Bioinspired self-repairing slippery surfaces with pressure-stable omniphobicity10.1038/nature10447 ↗
23. Biophysics: water-repellent legs of water striders10.1038/432036a ↗
24. Superhydrophobicity in perfection: the outstanding properties of the lotus leaf10.3762/bjnano.2.19 ↗
25. Petal effect: a superhydrophobic state with high adhesive force10.1021/la703821h ↗
26. X-ray photoelectron spectroscopy: towards reliable binding energy referencing10.1016/j.pmatsci.2019.100591 ↗
27. Reliable determination of chemical state in x-ray photoelectron spectroscopy based on sample-work-function referencing to adventitious carbon: resolving the myth of apparent constant binding energy of the C 1s peak10.1016/j.apsusc.2018.04.226 ↗
28. Green synthesis of silver nanoparticles from leaf extract of Mimusops elengi, Linn. for enhanced antibacterial activity against multi drug resistant clinical isolates10.1016/j.colsurfb.2013.03.017 ↗
29. Impact of pillar configuration on the amphiphobicity of micro-patterned polymer surface10.1016/j.vacuum.2018.07.024 ↗