journal article·2019-12

Sacrificial layer for laser lift-off process for flexible-display production

Hayk Khachatryan, Heewung Kim, Sung-Nam Lee, Moojin Kim, Kyoung-Bo Kim

Vacuum· Volume 170
Publisher page

Abstract

Abstract In this study, we developed a new sacrificial layer (SL) for laser transfer process. Metallic substrate i.e. invar foil was temporarily docked to a glass substrate using glass powder. To ensure successful delamination, the SL was pre-deposited between metal foil and glass substrate. For the first time, the SLs were amorphous gallium nitride and non-stoichiometric gallium oxide which were implemented for laser lift off (LLO) processes of metal foil. Bonding of metal foil to glass sheet was performed using heat treatment while debonding was achieved by LLO method. The laser wavelength was 355 nm which was the best fit for full absorption from SL layers. Transmission electron microscopy, element mapping, and energy dispersive X-ray spectroscopy analyses were performed for investigating elements’ migration and bonding-debonding mechanism.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Laser Material Processing Techniques · Surface Roughness and Optical Measurements · Adhesion, Friction, and Surface Interactions

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. Koden · 2017
2. Low‐power flexible organic light‐emitting diode display device10.1002/adma.201101066 ↗
3. Crawford · 2005
4. Toray Research Center · 2006
5. Wong · 2009
6. Crawford · 2005
7. Fabrication of nanowire electronics on nonconventional substrates by water-assisted transfer printing method10.1021/nl201901z ↗
8. Thin plastic electrophoretic displays fabricated by a novel process10.1889/1.2036327 ↗
9. Separation of thin GaN from sapphire by laser lift-off technique10.1143/JJAP.50.041001 ↗
10. Flexible microelectronics becoming a reality with SUFTLA transfer technology
11. Flexible displays and electronics made in AMLCD facilities by the EPLaRTM process10.1889/1.2785647 ↗
12. Line beam laser lift-off approach for sapphire removal
13. Laser processing of GaN-based LEDs with ultraviolet picosecond laser pulses10.1117/12.921843 ↗
14. Metal to glass sealing using glass powder: ion induced crystallization of glass10.1016/j.matchemphys.2019.01.037 ↗
15. XPS studies on the role of arsenic incorporated into GaN10.1016/j.vacuum.2019.05.043 ↗
16. Enhanced performance of solar-blind ultraviolet photodetector based on Mg-doped amorphous gallium oxide film10.1016/j.vacuum.2018.10.025 ↗
17. Epitaxial growth and characterization of high quality In2O3 films on a-plane sapphire substrates by MOCVD10.1016/j.vacuum.2019.05.035 ↗
18. Effect of bias voltage on microstructure and optical properties of Al2O3 thin films prepared by twin targets reactive high power impulse magnetron sputtering10.1016/j.vacuum.2019.04.060 ↗
19. Flexible organic light-emitting diodes using a laser lift-off method10.1039/c3tc30848k ↗
20. Size effects in the thermal conductivity of gallium oxide (β-Ga2O3) films grown via open-atmosphere annealing of gallium nitride10.1063/1.4913601 ↗
21. Transfer mechanism in surface free technology by laser annealing/ablation (SUFTLA)10.1889/1.1832450 ↗
22. Electrochemical properties of Fe2O3/Ga2O3 composite electrodes for lithium-ion batteries10.4028/www.scientific.net/KEM.566.119 ↗