Evaluation of growth behaviour of vanadium carbides-reinforced iron-based surface compound layer by in-situ reaction
Source abstract
Abstract
Abstract The growth of vanadium carbide reinforced iron substrate surface compound layers are investigated, where the compound coatings were fabricated by in situ synthesis process at 950 °C, 1000 °C and 1050 °C in 1–5 h, respectively. A detailed characterization about the microstructural change of compound layer is given by means of X-ray diffraction (XRD), scanning electron microscopy (SEM) and electron backscatter diffraction (EBSD). The obtained vanadium carbide compound layers are composed of V2C and V8C7. V2C and V8C7 have different microstructures and crystal orientations. The thickness of the vanadium carbide layer ranges from 16.62 ± 0.16 μm to 81.47 ± 0.63 μm in different process conditions. Growth kinetics of the layer follows the parabolic rules and the calculated activation energy value is Q = 415.7 K J / m o l . Both the heating treatment temperature and the holding time constantly influence on the microstructure and growth behaviour of the vanadium carbide compund layer.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Advanced materials and composites · Diamond and Carbon-based Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. Improvement of cavitation erosion resistance of AISI 316 stainless steel by laser surface alloying using fine WC powder10.1016/S0257-8972(02)00739-9 ↗
2. A TiCx reinforced Fe (Al) matrix composite using in-situ reaction10.1016/j.pnsc.2013.01.002 ↗
3. Microstructure and abrasive wear characteristics of in situ vanadium carbide particulate-reinforced iron matrix composites10.1016/j.matdes.2013.08.097 ↗
4. Surface modification of cold-working die steel by electron beam irradiation-formation of cemented carbide composite layer10.1016/j.proeng.2014.10.261 ↗
5. Comparison of the catalytic effects of V, V2O5, VN and VC on the hydrogen sorption of nanocrystalline Mg10.1016/S0925-8388(01)01173-2 ↗
6. A perspective on the properties and surface reactivities of carbides and nitrides of titanium and vanadium10.1016/j.ccr.2012.04.015 ↗
7. Mechanical properties of vanadium carbide and a ternary vanadium tungsten carbide10.1016/j.ssc.2010.01.043 ↗
8. Effect of nonstoichiometry on the lattice constant of cubic vanadium carbide VCy10.1134/S1063783417080133 ↗
9. Evaluation of vanadium carbide coatings on AISI H13 obtained by thermo-reactive deposition/diffusion technique10.1016/j.surfcoat.2010.07.065 ↗
10. Growth behavior and mechanical properties of Cr-V composite surface layer on AISI D3 steel by thermal reactive deposition10.1016/j.vacuum.2017.11.015 ↗
11. Electronic structures mechanical and thermal properties of V-C binary compounds10.1039/C4RA07543A ↗
12. Microstructural characterization of a V2C and V8C7 ceramic-reinforced Fe substrate surface compound layer by EBSD and TEM10.1016/j.jallcom.2018.02.313 ↗
13. Kinetics of V(N,C) coating produced by a duplex surface treatment10.1016/j.surfcoat.2008.02.027 ↗
14. Hard iron boride (Fe2B) on 99.97 wt% pure iron10.1016/j.vacuum.2006.01.022 ↗
15. Computer-aided modeling for predicting layer thickness of a duplex treated ceramic coating on tool steels10.1016/j.ceramint.2013.10.141 ↗
16. Enhanced boronizing kinetics of alloy steel assisted by surface mechanical attrition treatment10.1016/j.jallcom.2013.12.151 ↗
17. Study on kinetics of carbide coating growth by thermal diffusion process10.1016/j.surfcoat.2006.04.028 ↗
18. A study on kinetics of CrxC-coated high-chromium steel by thermo-reactive diffusion technique10.1016/j.vacuum.2005.01.009 ↗
19. Kinetics of niobium carbide coating produced on AISI 1040 steel by thermo-reactive deposition technique10.1016/j.matchemphys.2004.03.002 ↗
20. Kinetics of niobium carbide reinforced composite coating produced in situ10.1016/j.vacuum.2015.05.035 ↗