journal article·2019-01

Microstructure evolution and wettability of Ag Cu Zn alloy on TiC Ni cermet

Min Lei, Yulong Li, Hua Zhang, Jicai Feng, Lixia Zhang

Vacuum· Volume 159
Publisher page

Abstract

Abstract Wetting of Ag Cu Zn alloy on TiC Ni cermet was performed using a sessile drop method in vacuum and the interfacial microstructure was studied. A continuous (Cu, Ni) solid-solution layer was formed at the Ag Cu Zn/TiC Ni cermet interface held at 810 °C for 10 min. According to the TEM results, an orientation relationship between the (Cu, Ni) solid-solution layer and the TiC particle at the interface was determined: TiC[4 2 ¯ 0]//(Cu, Ni) [0 2 ¯ 2], TiC(00 2 ¯ )//(Cu, Ni)(111). As the temperature increased to 960 °C, the (Cu, Ni) solid-solution layer dissolved into the liquid alloy and changed from continuous to discontinuous. The continuing growth of the (Cu, Ni) solid-solution layer at the interface at 810 °C was controlled by the Ni diffusion process from the TiC Ni cermet to the liquid alloy. The average contact angles of the Ag Cu Zn alloy and Ag Cu alloy on the TiC Ni cermet were 19° and 121.5° at 810 °C, respectively. And the temperature increase had little effect on the final contact angle.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced materials and composites · Aluminum Alloys Composites Properties · Electronic Packaging and Soldering Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. Brazing temperature and time effects on the mechanical properties of TiC cermet/Ag-Cu-Zn/steel joints10.1016/j.msea.2005.11.044 ↗
2. Microstructure and mechanical properties of TiC-TiN based cermets for tools application10.1016/j.ijrmhm.2008.10.006 ↗
3. Microstructure and mechanical properties of TiC-WC-(Ti, W) C-Ni cermets10.1016/j.msea.2009.05.017 ↗
4. Interface structure and mechanical properties of the brazed joint of TiC cermet and steel10.1016/j.jeurceramsoc.2005.01.043 ↗
5. Microstructure and shear strength of the brazed joint of Ti(C, N)-based cermet to steel10.1007/s12598-010-0013-7 ↗
6. Interface structure and mechanical properties of Ti(C, N)-based cermet and 17-4PH stainless steel joint brazed with nickel-base filler metal BNi-210.1016/j.jmatprotec.2011.06.003 ↗
7. Additional active metal Nb in Cu-Ni system filler metal for brazing of TiC cermet/steel10.1016/j.matlet.2015.04.126 ↗
8. Microstructure and shear strength of brazed joints between Ti(C, N)-based cermet and steel with CuAgTi filler metal10.1016/j.jallcom.2016.04.298 ↗
9. Characterization of Al/Ni multilayers and their application in diffusion bonding of TiAl to TiC cermet10.1016/j.tsf.2012.01.001 ↗
10. Microstructure and properties of the Ti(C, N)-xMo2C-Ni cermet/steel joint by a novel diffusion bonding method10.1016/j.matchar.2014.11.022 ↗
11. Ultrasonic welding of ceramic/metal10.1016/0924-0136(94)90094-9 ↗
12. Ultrasonic welding of ceramics/metals using inserts10.1016/S0924-0136(97)00372-5 ↗
13. Microwave applications in materials joining10.1016/0924-0136(94)01701-2 ↗
14. Thermo-mechanical and diffusion modelling in the process of ceramic-metal friction welding10.1016/j.jmatprotec.2008.04.012 ↗
15. Effects of processing parameters on microstructure and mechanical behavior of SiO2/Ti-6Al-4V joint brazed with AgCu/Ni interlayer10.1016/j.msea.2009.10.050 ↗
16. Wetting and brazing of stainless steels by copper-silver eutectic10.1016/j.msea.2007.10.101 ↗
17. Interfacial reactions between Ni/430 stainless steel as the interconnect material and Ag-Cu alloy fillers in a solid oxide fuel cell system10.1016/j.jallcom.2007.11.044 ↗
18. Reactive wetting of TiC-Ni cermet by Ag-Cu-Zn alloy during evaporation10.1016/j.vacuum.2017.01.014 ↗
19. Influence of interfacial reaction on reactive wettability of molten Ag-Cu-X wt.%Ti filler metal on SiC ceramic substrate and mechanism analysis10.1016/j.apsusc.2017.12.106 ↗
20. Wetting and interactions of Ag-Cu-Ti and Ag-Cu-Ni alloys with ceramic and steel substrates for use as sealing materials in a DCFC stack10.1007/s10853-015-9536-5 ↗
21. Brazing copper to alumina using reactive CuAgTi alloys10.1016/j.actamat.2009.10.029 ↗
22. Interfacial reactions in alumina/CuAgTi braze/CuNi system10.1016/j.scriptamat.2004.09.008 ↗
23. Brazing of ZrB2-SiC-C ceramic and GH99 superalloy to form reticular seam with low residual stress10.1016/j.ceramint.2014.08.051 ↗
24. Diffusion brazing of Ti-6Al-4V and austenitic stainless steel using silver-based interlayer10.1016/j.matdes.2013.07.103 ↗
25. Microstructures of eutectic and near eutectic specimens in the ternary Ag-Cu-Zn system10.1179/cmq.1980.19.4.345 ↗
26. Weld metal composition change during conduction mode laser welding of aluminum alloy 518210.1007/s11663-001-0018-6 ↗
27. Influence of brazing parameters and alloy composition on interface morphology of brazed diamond10.1016/j.msea.2007.08.101 ↗
28. Nabarro · 1979
29. Phase equilibria of the ternary Ag-Cu-Ni system and the interfacial reactions in the Ag-Cu/Ni couples10.1007/BF00355906 ↗
30. Effect of microstructure and pure component properties on the dissolution rate of a binary composite material10.1016/j.commatsci.2008.01.037 ↗
31. The ternary alloys Ni-Cu-Ag
32. Diffusional breakdown of nickel protective coatings on copper substrate in silver-copper eutectic melts10.1007/s11661-997-0227-y ↗
33. Interfacial reactions in the liquid (Ag, Cu) Ni diffusion couples10.1016/0254-0584(93)90074-V ↗
34. Thermophysical properties of Ag and Ag-Cu liquid alloys at 1098K to 1573K10.1007/s10765-010-0798-5 ↗