Uncertainties in calibration using capacitance diaphragm gauges as reference standard
Source abstract
Abstract
Abstract A study of the uncertainties in calibration using capacitance diaphragm gauges as reference standard in the range from 1000 mbar to 10−3 mbar is presented. The contributions to the expanded uncertainty are: (i) Uncertainty from the calibration certify of the reference standard; (ii) Long-term stability or shift; (iii) Uncertainties inherent to the reference standard; (iv) Uncertainties derived from the calibration chamber; and (v) Uncertainties derived from the calibration procedure. These contributions have been determined for four reference standard capacitance diaphragm gauges of 1.3 mbar, 13 mbar, 130 mbar and 1300 mbar full scale used in routine calibration. Long-term stability or shift jointly with the uncertainty displayed in the calibration certifies issued by a National Metrological Laboratory are the main contributions to the expanded uncertainty. Values of the shift for each of the reference standard for a period of several years are presented and discussed. Best-expanded uncertainties obtained from calibration of a gauge of similar characteristics to the reference standards are: 10−3–1 mbar 4–0.2% of the reading 1–13 mbar 0.2% of the reading 13–130 mbar 0.2–0.08% of the reading 130–1300 mbar 0.2–0.06% of the reading
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Electrical Measurement Techniques · Scientific Measurement and Uncertainty Evaluation · Sensor Technology and Measurement Systems
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (10)
Show source-provided references
1. Wutz · 1989
2. Ruthberg · J Vac Sci Technol · 1968 · 6 · 40110.1116/1.1492701 ↗
3. Buckmann · J Vac Sci Technol · 1984 · A 2 · 159910.1116/1.572477 ↗
4. Berman · 1985
5. Huang · J Vac Sci Technol · 1987 · A 5 · 238010.1116/1.574458 ↗
6. Hayland · J Vac Sci Technol · 1991 · A9 · 284310.1116/1.577209 ↗
7. Accuracy in Vacuum Measurements
8. Calcatelli · Vacuum · 2001 · 67 · 153
9. ISO/TS 3567:2005. Recommendation for Calibration of Vacuum Gauges by Direct Comparison.
10. DKD-R 6–2 Kalibrierung von Messmitteln für Vacuum. Elektrische Membran Vakuummeter.