journal article·2012-07

Reduction of byproduct particle size using low-pressure plasmas generated by a cylindrical-shaped electrode

M. Hur, J.O. Lee, H.A. Yoo, W.S. Kang, Y.H. Song, D.G. Kim, S.Y. Lee

Vacuum· Volume 86· Issue 12
Publisher page

Abstract

Abstract In the case of a plasma-enhanced chemical vapor deposition, large amounts of byproduct particles arrive at a vacuum pump in spite of the use of cleaning process. As these particles are accumulated on internal components of a vacuum pump, its performance is reduced. A plasma reactor located right before a vacuum pump is proposed with an aim to reduce the size and quantity of byproduct particles, thereby to improve the durability of a vacuum pump. The plasma reactor and electrode all have a concentric cylindrical shape, which allows the device to be easily connected to pre-existing vacuum pipelines without any disturbance to the exhaust stream. The sizes of byproduct particles before the vacuum pump are quite diverse in the range of tens of nanometers to tens of micrometers. The plasma reactor makes the size and quantity of byproduct particles much smaller, and the particles larger than 1 μm are not observed anymore. This result indicates that the vacuum pump durability can be significantly improved by using plasmas.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Gas Sensing Nanomaterials and Sensors · Electronic and Structural Properties of Oxides · Vacuum and Plasma Arcs

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (12)

Show source-provided references
1. Particle nucleation and growth in a low-pressure argon-silane discharge10.1088/0963-0252/3/3/004 ↗
2. Dusty Plasma for nanotechnology10.1088/0022-3727/44/17/174035 ↗
3. Abatement of PFCs from semiconductor manufacturing processes by nonthermal plasma technologies10.1021/ie051227b ↗
4. Temperature resolved modeling of plasma abatement of perfluorinated compounds10.1063/1.1337088 ↗
5. AC low-pressure plasmas generated by using annular-shaped electrodes for abatement of pollutants emitted during semiconductor manufacturing processes10.3938/jkps.59.2742 ↗
6. Abatement of CF4 and CHF3 byproducts using low-pressure plasmas generated by annular-shaped electrodes10.1116/1.3679407 ↗
7. Power dependence of NF3 plasma stability for in situ chamber cleaning10.1063/1.1688994 ↗
8. Optimization and analysis of NF3 in situ chamber cleaning plasmas10.1063/1.1688996 ↗
9. Optimizing utilization efficiencies in electronegative discharges: the importance of the impedance phase angle10.1063/1.371449 ↗
10. Ion energy distributions and optical emission spectra in NF3-based process chamber cleaning plasmas
11. Particle formation and trapping behavior in a TEOS/O2 plasma and their effects on contamination of a Si wafer10.1080/02786820490250845 ↗
12. Incorporation of dust particles into a growing film during silicon dioxide deposition from a TEOS/O2 plasma10.1080/027868290950257 ↗