Ultra-high vacuum qualification of the prototype module for the 2×3km arms of the VIRGO interferometer
Source abstract
Abstract
The prototype for the series production of the 400 modules to be built by CNIM is first shortly described after the surface cleaning and 400°C air firing. The system for the 160°C bake out, the pumping and measuring bench installed in the CNIM premises are then presented. The results on leak tightness, hydrogen outgassing and residual hydrocarbon contamination are reported and compared to the 20°C VIRGO specifications. An additional test on hydrogen diffusion at 400°C performed at CERN on a stainless-steel sample is reported. Our measurement of the hydrogen outgassing rate is discussed in relation with this test and also with regard to the oxide layer resulting from the air firing.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Particle Accelerators and Free-Electron Lasers · Superconducting Materials and Applications · Particle accelerators and beam dynamics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (5)
Show source-provided references
1. VIRGO final design. INFN-CNRS, Pisa, 1995.
2. Outgassing performances of an industrial prototype tape for VIRGO antenna10.1016/S0042-207X(98)00001-3 ↗
3. Derick P, Bartolo S. Industrialisation of the 400 ultra high vacuum modules construction for the VIRGO interferometer arms. CNIM, La Seyne sur Mer, France, This Conference, unpublished.
4. Dégazage des aciers inoxydables austéristiques sous ultra-vide
5. Benvenuti C, Chiggiato P, Mongé A. Measurement of the hydrogen diffusion coefficient of the stainless steel proposed for the VIRGO experiment. Technical Report 28/07/1999, EST/SM/DA.