Chemical polishing of aluminum coupons in support of vacuum chambers
Source abstract
Abstract
Abstract Success of third and fourth generation light sources is highly dependent upon the smoothness of internal surfaces in small aperture undulators. The ratio of the undulator length to the chamber aperture is very large, making mechanical polishing difficult to implement. Chemical polishing is a viable alternative option. This study investigates the effectiveness of a chemical polishing step as a finishing treatment in lieu of mechanical polishing. Limited to no quantitative data exists in the literature that links specific chemical polishing processes to profilometer-measured surface roughness. This study examines the effectiveness of using two chemical solutions at various temperatures to treat the surfaces of aluminum coupons and reduce their surface roughness. Results indicate that certain chemical polishing steps can reduce the root mean square roughness of the surface by as much as 40%; however, careful control of the solution temperature, composition, and immersion time is critical.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Measurement and Metrology Techniques · Advanced Sensor Technologies Research · Scientific Measurement and Uncertainty Evaluation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (8)
Show source-provided references
1. Impedance of small obstacles and rough surfaces10.1103/PhysRevSTAB.1.064401 ↗
2. Effects of beam-tube roughness on X-ray free electron laser performance10.1103/PhysRevSTAB.2.060701 ↗
3. King · 1988
4. Wernick · 1987 · vol. 1
5. Mahmoud IS. Chemical polishing of aluminum alloys. U.S. Patent 4,956,022; 1989.
6. Martinou R, Ruimi M. Pickling process for heat-resistant alloy articles. U.S. Patent 4,707,191; 1987.
7. Surface preparation of aluminum for ion implantation10.1016/0026-0800(89)90038-4 ↗
8. American Society of Mechanical Engineers · 2003