journal article·2015-01

Maintenance of high vacuum level in a compact and lightweight sealed hard-tube magnetically insulated line oscillator system

Xuelong Zhao, Tao Xun, Lie Liu, Dan Cai

Vacuum· Volume 111
Publisher page

Abstract

Abstract Magnetically insulated line oscillator (MILO) is compact and lightweight high power microwave tube. To maintain the MILO below 10 −2 Pa, we used built-in non evaporable-getter (NEG). In comparison with other pumping technology, the NEG pump operates without power is lightweight and compact. To estimate the vacuum life in static state, we carried out experimental analysis to investigate the outgassing characteristics of the main materials of the MILO in static state. Considering the expected pumping characteristics of NEG pumps in combination with the experimental data, the conclusion is that at room temperature two NEG pumps will maintain high vacuum level in the MILO more than 250 days. Moreover, the pulse desorption characteristics of MILO under high voltage pulse operation (peak voltage 440 kV, pulse width 80 ns) were also measured. At room temperature, the evaluation shows that one NEG pump can maintain the MILO tube in high vacuum level for nearly 8 pulses.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Gyrotron and Vacuum Electronics Research · Particle accelerators and beam dynamics · Pulsed Power Technology Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. Vacuum requirements in high power microwave tubes10.1016/0042-207X(95)00039-9 ↗
2. Nation · 1999
3. The influence of vacuum conditions on the microwave generation in a vircator10.1134/1.1424408 ↗
4. Barker · 2001
5. Latham · 1995
6. Current conduction and plasma distribution on dielectric (velvet) explosive emission cathodes10.1063/1.1625411 ↗
7. Mechanism of explosive electron emission for dielectric fiber (velvet) cathodes10.1063/1.368567 ↗
8. Recent progress in the hard-tube MILO experiment
9. Operation of a sealed-tube-vircator high-power-microwave source10.1109/TPS.2012.2192454 ↗
10. Present and future developments of high-power relativistic klystron amplifiers
11. Effects of vacuum pressures on the performance of a velvet cathode under repetitive high-current pulse discharges10.1016/j.vacuum.2010.07.004 ↗
12. Importance of the surface oxide layer in the reduction of outgassing from stainless steels10.1116/1.579669 ↗
13. Vacuum outgassing of artificial dielectric ceramics10.1116/1.579043 ↗
14. A non-evaporable getter for low temperatures10.1016/0042-207X(73)92419-6 ↗
15. Non evaporable getter (NEG) technology: a powerful tool for UHV–XHV systems10.1063/1.4732360 ↗
16. Distributed pumping by non-evaporable getters in particle accelerators10.1109/TNS.1981.4332097 ↗
17. A novel route to compact, high performance pumping in UHV–XHV vacuum systems10.1016/j.vacuum.2013.01.017 ↗
18. Dealing with high gas loads in UHV systems: some recent developments at CERN (LEAR)10.1016/0042-207X(87)90016-9 ↗
19. Gas evolution during operation of a CsI-coated carbon fiber cathode in a closed vacuum system10.1109/TPS.2005.844593 ↗