journal article·2012-03

Friction in near-surface regions of plasma-nitrided and post-oxidized plain steel at various hydrogen contents

C. Luvison, V. Sonda, A.C. Rovani, F. Cemin, F.G. Echeverrigaray, C. Aguzzoli, A.E. Crespi, C.L.G. Amorim, M.E.H. Maia da Costa, I.J.R. Baumvol, C.A. Figueroa

Vacuum· Volume 86· Issue 9
Publisher page

Abstract

Abstract We investigated the low load friction behavior of plasma post-oxidized, plasma- nitrided AISI 1045 plain steel, using unidirectional sliding tests. The hydrogen content in the post-oxidation plasma was varied between 0 and 25%. The nitrided or oxidized layer thicknesses ranged from approximately 340–380 μm or 0.7–1.1 μm, respectively. The outermost iron oxide layer decreases the friction, whereas the underneath iron nitride layer increases the mechanical strength. The incorporation of hydrogen in the oxidative plasma mixture allows to control the type of iron oxide phase. It is observed that the presence of a superficial magnetite layer leads to a decrease of the friction coefficient with respect to the non-oxidized nitrided steel. The results are interpreted on the lights of crystal chemistry and with a model to explain the in-depth effects of hydrogen in the oxidative plasma.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. Fundamentals and applications of the combination of plasma nitrocarburizing and oxidizing10.1016/S0257-8972(97)00548-3 ↗
2. High-corrosion-resistant Al2O3 passivation-film formation by selective oxidation on austenitic stainless steel containing Al10.1116/1.3543709 ↗
3. Recombination probability of oxygen atoms on dynamic stainless steel surfaces in inductively coupled O2 plasmas10.1116/1.2902953 ↗
4. Surface characteristics of AISI 304L stainless steel after an atmospheric pressure plasma treatment10.1016/j.surfcoat.2004.07.071 ↗
5. Composition, structure and morphology of oxide layers formed on austenitic stainless steel by oxygen plasma immersion ion implantation10.1016/j.apsusc.2007.01.133 ↗
6. Effect of hydrogen on plasma post-oxidation of ferrous alloys10.1016/j.scriptamat.2010.02.024 ↗
7. Plasma post-oxidation mechanisms of nitrided ferrous alloys10.1016/j.surfcoat.2010.12.006 ↗
8. Phase transformations and stress relaxation in γ’-Fe4N1-x layers during oxidation10.1007/BF02656574 ↗
9. On the oxidation of a-Fe and e-Fe2N1-z: I. Oxidation kinetics and microstructural evolution of the oxide and nitride layers10.1007/BF01675263 ↗
10. Surface processes and diffusion mechanisms of ion nitriding of stainless steel and aluminium10.1016/S0257-8972(00)01015-X ↗
11. Hydrogen etching mechanism in nitrogen implanted iron alloys studied with in situ photoemission electron spectroscopy10.1116/1.2013322 ↗
12. Plasma post oxidation of nitrocarburized hot work steel samples10.1016/j.surfcoat.2003.09.012 ↗
13. Effect of treating atmosphere in plasma post-oxidation of nitrocarburized AISI 5115 steel10.1016/j.vacuum.2007.05.005 ↗
14. Duplex treatment of plasma nitriding and plasma oxidation of plain carbon steel10.1016/j.vacuum.2005.01.002 ↗
15. Effect of gas mixture of plasma post-oxidation on corrosion properties of plasmanitrocarburised AISI 4130 steel10.1016/j.vacuum.2009.01.010 ↗
16. Effect of post oxidation on the fretting wear behavior of liquid nitrided En 24 steel10.1016/j.surfcoat.2005.02.115 ↗
17. A crystal chemical approach to the formulation of self-lubricating nanocomposite coatings10.1016/j.surfcoat.2005.08.054 ↗
18. Nanoscale friction of partially oxidized silicon nitride thin films10.1016/j.surfcoat.2011.03.111 ↗
19. 1995
20. Microanalysis of the stable isotopes of oxygen by means of nuclear reactions
21. New precision technique for measuring the concentration versus depth of hydrogen in solids10.1063/1.88826 ↗
22. Influence of the microstructure on steel hardening in pulsedplasma nitriding10.1116/1.2889395 ↗
23. Kinetics of dense magnetite formation during oxidation of wustite and reduction of hematite in CO-CO2 gas-mixtures10.1002/srin.198104923 ↗
24. Numerical analysis of oxygen induction thermal plasmas with chemically non-equilibrium assumption for dissociation and ionization10.1016/j.tsf.2003.12.022 ↗
25. Relation of certain quantum chemical parameters to lubrication behavior of solid oxides10.3390/i6060203 ↗
26. Structure and determination of gamma’-Fe4N and epsilon-Fe3N10.1016/0925-8388(95)01610-4 ↗
27. A Chemla-type electrotransport experiment in magnetite, Fe3-delta O410.5796/electrochemistry.68.482 ↗
28. The initial oxidation of epsilon-Fe2N1-x: an XPS investigation10.1016/S0169-4332(98)00345-6 ↗
29. OH kinetic in high-pressure plasmas of atmospheric gases containing C(2)H(6) studied by absolute measurement of the radical density in a pulsed homogeneous discharge10.1088/0022-3727/42/16/165203 ↗