Effects of sensitization induced intercrystalline precipitation on mechanical properties of 204C2 nickel-saving austenitic stainless steel
Source abstract
Abstract
Abstract The intercrystalline precipitation behavior and mechanical properties of 204C2 nickel-saving austenitic stainless steel (NSAs) sensitized for 15 min at 500–800 °C after solid solution treatment was investigated. The experimental results show that with the increase of sensitization temperature, the intercrystalline precipitate underwent four stages of change: point-shaped at 500 °C → discontinuous points at 600 °C → chain shape at 700 °C →growth into the grain at 800 °C. Combined with the results of the tensile test at room temperature, the specimens were sensitized at 600 °C and 700 °C, their tensile strength and yield strength both decreased, but their elongation was almost the same. The occurrence of this phenomenon indicating that compared with the discontinuous point precipitates, the chain precipitates caused less lattice distortion in the surrounding matrix and required less energy to produce the same deformation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (11)
Show source-provided references
1. Hamada · 2015 · 628
2. Xu · 2018 · 720
3. Precipitation behavior and phase transformation mechanism of super austenitic stainless steel S32654 during isothermal aging
4. Aging precipitation behaviors of Nb-contained 316LN SS[J]
5. Moon · 2015 · 645
6. Kartik · 2015 · 642
7. Trotter · 2015 · 627
8. Correlation between microstructure and intergranular corrosion behavior of low delta-ferrite content AISI 316L aged in the range 550–700 °C[J]10.1016/j.jallcom.2017.02.273 ↗
9. Precipitation behavior and phase transformation mechanism of super austenitic stainless steel S32654 during isothermal aging
10. Characterisation of duplex stainless steel subjected to long-term annealing in the sigma phase formation temperature range by the DLEPR test[J]10.1016/j.corsci.2011.07.013 ↗
11. Diffusion and interactions of point defects in hard-sphere crystals