journal article·2020-04

Stick-climb-slip induced damage mode in Cu/Si(100) thin films deposited by modulated pulsed power magnetron sputtering during scratch

D. Meng, Y.G. Li, Z.T. Jiang, M.K. Lei

Vacuum· Volume 174
Publisher page

Abstract

Abstract Stick-climb-slip induced damage mode during a scratch test was studied in the Cu/Si(100) thin films deposited by modulated pulsed power magnetron sputtering, to characterize the adhesion of the thin films. The two typical periodical morphologies were observed on the scratch tracks after first edge chipping of the Cu/Si(100) thin films. The first type was a series of wave-like traces outside the scratch track, and another was the periodical semi-circular deformation characteristic within the scratch track. Finite element method (FEM) was used to analyze the stress-strain response in the Cu/Si(100) thin films for the moved scratch tip under the applied load. It was found that the concentrations of maximum principal stress in zones A, B and C were responsible to the formation of groove pileups accompanied by the periodical accumulation and release of the strain energy with a contact force periodically fluctuated. The scratched tip in the ductile Cu/Si(100) thin films would repeatedly experience the forward pileups along thinning and growing trace, and gradually climb up and then drop down with a sudden movement. The stick-climb-slip induced damage modes of the thin films can provide the evaluation of the critical loads in the scratch test.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Advanced Surface Polishing Techniques · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. Effect of prior plasma nitriding applied to a hot-work tool steel on the scratch-resistant properties of PACVD TiBN and TiCN10.1016/j.surfcoat.2006.04.064 ↗
2. The study of the adhesion of a TiN coating on steel and titanium alloy substrates using a multi-mode scratch tester10.1016/j.triboint.2005.04.011 ↗
3. Mechanical and tribological properties of CrN/TiN multilayer coatings deposited by pulsed dc magnetron sputtering10.1016/j.surfcoat.2015.06.064 ↗
4. Nature of sliding and the analysis of friction10.1038/141691b0 ↗
5. Stick-slip and temperature effect in the scratching of materials10.1023/A:1015453725893 ↗
6. Slip process of stick-slip motion in the scratching of a polymer10.1016/S0921-5093(02)00409-4 ↗
7. Investigation of nano-scale scratch and stick-slip behaviors of polycarbonate using atomic force microscopy10.1016/j.triboint.2018.04.024 ↗
8. Atomic scale stick-slip caused by dislocation nucleation and propagation during scratching of a Cu substrate with a nanoindenter: a molecular dynamics simulation10.1016/j.wear.2005.01.002 ↗
9. Adhesion strength of copper thin films to a E24 carbon steel: effects of substrate surface ion bombardment etching10.1163/156856193X00277 ↗
10. Modified scratch test for study of the adhesion of ductile coatings10.1016/0257-8972(94)90094-9 ↗
11. Scratch behavior and FEM modelling of Cu/Si(100) thin films deposited by modulated pulsed power magnetron sputtering10.1016/j.surfcoat.2019.02.008 ↗
12. The tension of metallic films deposited by electrolysis
13. Strain hardening behavior of ultrafine-grained Cu by analyzing the tensile stress-strain curve10.1002/adem.200700324 ↗
14. On the numerics and correlation of scratch testing10.2140/jomms.2007.2.573 ↗
15. Understanding of scratch-induced damage mechanisms in polymers10.1016/j.polymer.2009.06.061 ↗
16. Stick-slip in the scratching of styrene-acrylonitrile copolymer10.1557/JMR.1996.0197 ↗
17. Scratch deformation behavior of thermoplastic materials with significant differences in ductility10.1016/j.msea.2005.03.028 ↗
18. Solution to inverse problem of manufacturing by surface modification with controllable surface intergrity correlated to performance: a case study of thermally sprayed coatings for wear performance10.1115/1.4036184 ↗
19. Evaluation of adhesion strength of Ti films on Si(100) by the internal stress method10.1016/S0040-6090(97)00514-2 ↗
20. Nanomechanical fracture-testing of thin films10.1016/S0013-7944(98)00050-2 ↗
21. Copper thin films deposited under different power delivery modes and magnetron configuration: a comparative study10.1016/j.surfcoat.2016.11.001 ↗
22. Finite element method parametric study on scratch behavior of polymers10.1002/polb.21169 ↗
23. Mechanical Buckling instability of thin coatings deposited on soft polymer substrates10.1023/A:1004707906821 ↗
24. Measurement of adhesion of thin films10.1098/rspa.1960.0012 ↗