Synthesis of Zr2Al3C4 coatings on zirconium-alloy substrates with Al C/Si interlayers as diffusion barriers
Source abstract
Abstract
Abstract Zr2Al3C4 coatings are potential candidates to prevent claddings of traditional Zr-based alloys from severe oxidation in water steam at high temperature. However, the diffusion of aluminum between coating and substrates at high temperature results in a coating composition deviating from the compositional domain for formation of the Zr2Al3C4 phase. Thus, synthesis of Zr2Al3C4 coatings on zirconium-alloy substrates is challenging. Here, we report that the Zr2Al3C4 phase can be obtained on zirconium alloy (ZIRLO) substrates where an Al C/Si interlayer deposited by magnetron sputtering is introduced. The Al C/Si interlayer prevented elemental diffusion of aluminum between the Zr Al C coating and the substrates during a post-annealing process at 800 °C for 3 h. The Al/Zr ratio of the Zr Al C coating after annealing was ∼0.96 and ∼0.59 in the cases of with and without Al C/Si interlayer, respectively. Hence, the Al C/Si interlayer acts as diffusion barrier and greatly decreases the deviation from the standard stoichiometric ratio of the Zr2Al3C4 phase, which facilitates the formation of the Zr2Al3C4 phase in the final coating.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: MXene and MAX Phase Materials · Nuclear Materials and Properties · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. Development status of accident-tolerant fuel for light water reactors in korea10.1016/j.net.2015.11.011 ↗
2. Behavior of an improved Zr fuel cladding with oxidation resistant coating under loss-of-coolant accident conditions10.1016/j.jnucmat.2016.10.021 ↗
3. Research and development methodology for practical use of accident tolerant fuel in light water reactors10.1016/j.net.2015.12.004 ↗
4. Enhanced high-temperature oxidation resistance of a zirconium alloy cladding by high-temperature preformed oxide on the cladding10.1016/j.corsci.2017.11.019 ↗
5. The Mn+1AXn phases: Materials science and thin-film processing10.1016/j.tsf.2009.07.184 ↗
6. Recent progress in theoretical prediction, preparation, and characterization of layered ternary transition-metal carbides10.1146/annurev-matsci-082908-145340 ↗
7. Synthesis and structure–property relationships of a new family of layered carbides in Zr-Al(Si)-C and Hf-Al(Si)-C systems10.1016/j.jeurceramsoc.2013.05.020 ↗
8. Ultrahigh-temperature oxidation of Zr2Al3C4 via rapid induction heating10.1016/j.scriptamat.2008.12.002 ↗
9. High-temperature internal friction, stiffness and strength of Zr–Al(Si)–C ceramics10.1016/j.scriptamat.2009.03.004 ↗
10. Synthesis and characterization of Zr2Al3C4 thin films10.1016/j.tsf.2015.10.079 ↗
11. Investigations of the ternary systems (Zr, H, Nb, Ta)-Al-C and studies on complex carbides
12. Thermal expansion of zirconium in the solid phase10.1068/htjr066 ↗
13. Variation of microstructure and composition of the Cr2AlC coating prepared by sputtering at 370 and 500°C10.1016/j.surfcoat.2010.04.067 ↗
14. Oxidation behaviour of Ti–Al–C films composed mainly of a Ti2AlC phase10.1016/j.corsci.2011.05.033 ↗
15. Synthesis and characterization of Ti2AlC coatings by magnetron sputtering from three elemental targets and ex-situ annealing10.1016/j.surfcoat.2016.11.090 ↗
16. Synthesis and characterization of bulk Zr2Al3C4 ceramic10.1111/j.1551-2916.2007.01964.x ↗
17. Tribological properties of a Zr2Al3C4 ceramic at ambient temperature10.1111/j.1551-2916.2008.02805.x ↗
18. A two-dimensional zirconium carbide by selective etching of Al3C3 from nanolaminated Zr3Al3C510.1002/anie.201510432 ↗
19. Intermetallics in the Zr–Al diffusion zone10.1016/j.intermet.2003.09.002 ↗
20. Microstructure evolution of V–Al–C coatings synthesized from a V2AlC compound target after vacuum annealing treatment10.1016/j.jallcom.2015.11.170 ↗
21. One-step synthesis of polycrystalline V2AlC thin films on amorphous substrates by magnetron co-sputtering10.1016/j.vacuum.2017.08.049 ↗