Microstructure and phase evolution of gradually-structured arc evaporated Al0.25Cr0.75-based oxide coatings
Source abstract
Abstract
Abstract The structural evolution from the (inter)metallic to the oxide-stoichiometric regime within oxygen-gradient Al0.25Cr0.75-based coatings was investigated by transmission electron microscopy (TEM). Grain refinement of the (inter)metallic Cr(Al) structure — induced by the addition of oxygen to the growth process — is less significant than for the higher Al-containing Al0.50Cr0.50-based coatings. Our detailed TEM studies clearly show that between 110 and 120 sccm O2 per active Al0.25Cr0.75-source (corresponding to 0.7–0.9 Pa), the coating structure changes from partially oxidised — where (inter)metallic Cr(Al) particles are encapsulated by amorphous-like Al-rich oxides — to a columnar, corundum-type sesquioxide structure. Contrary to the higher Al-containing Al0.50Cr0.50-based coatings, this transformation takes place without the formation of metastable cubic (Al1-xCrx)2O3 structures.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · High-Temperature Coating Behaviors · Diamond and Carbon-based Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. Preparation of Cr2O3-Al2O3 solid solutions by reactive magnetron sputtering10.1007/s006040070092 ↗
2. Microstructure and thermal stability of corundum-type (Al0.5Cr0.5)2O3 solid solution coatings grown by cathodic arc evaporation10.1016/j.tsf.2013.02.046 ↗
3. Seed layer stimulated growth of crystalline high Al containing (Al,Cr)2O3 coatings deposited by cathodic arc evaporation10.1016/j.tsf.2013.10.125 ↗
4. Structure, mechanical properties, and thermal stability of arc evaporated (Al1-xCrx)2O3 coatings10.1016/j.surfcoat.2018.02.077 ↗
5. Ab initio calculations on the effects of additives on alumina phase stability10.1103/PhysRevB.71.014101 ↗
6. Effects of additives in α- and θ-alumina: an ab initio study10.1088/0953-8984/16/49/012 ↗
7. Metastable alumina polymorphs: crystal structures and transition sequences10.1111/j.1151-2916.1998.tb02581.x ↗
8. Face-centered cubic (Al1−xCrx)2O310.1016/j.tsf.2010.11.052 ↗
9. Formation of cubic structured (Al1−xCrx)2+δO3 and its dynamic transition to corundum phase during cathodic arc evaporation10.1016/j.surfcoat.2012.10.062 ↗
10. Pulse enhanced electron emission (P3e™) arc evaporation and the synthesis of wear resistant Al–Cr–O coatings in corundum structure10.1016/j.surfcoat.2007.05.044 ↗
11. Corundum-type Fe-doped cathodic arc evaporated Al–Cr–O coatings10.1016/j.scriptamat.2014.10.037 ↗
12. Influence of pulsed bias duty cycle variations on structural and mechanical properties of arc evaporated (Al,Cr)2O3 coatings10.1016/j.surfcoat.2015.09.055 ↗
13. Selective phase formation in substoichiometric Al-Cr-based oxides10.1016/j.scriptamat.2017.06.039 ↗
14. Al-Cr (Aluminum-Chromium)10.1007/s11669-007-9225-4 ↗
15. Role of droplets and iron on the phase formation of arc evaporated Al–Cr-oxide coatings10.1016/j.surfcoat.2015.05.012 ↗
16. Cathodic arc deposition of (Al,Cr)2O3: macroparticles and cathode surface modifications10.1016/j.surfcoat.2011.09.028 ↗
17. Microstructural modifications in powder-metallurgically produced Al0.675Cr0.275Fe0.05 targets during cathodic arc evaporation10.1116/1.4938407 ↗
18. The Al-Cr (Aluminum-Chromium) system10.1361/105497198770342102 ↗
19. Substrate rotation-induced chemical modulation in Ti-Al-O-N coatings synthesized by cathodic arc in an industrial deposition plant10.1016/j.surfcoat.2016.08.046 ↗