journal article·2018-09

Fabrication and oxidation of an Y2O3-modified low temperature aluminide coating on 309 stainless steel

Yongdong Wang, Jixiao Wang, Haiting Hu, Junsheng Meng, Xia Zhao

Vacuum· Volume 155
Publisher page

Abstract

Abstract By using Y2O3 nanoparticles, instead of part of Al2O3, acting as filler, Y2O3-modified aluminide coatings were produced on 309 stainless steel using a conventional pack-cementation method at 600 °C for 8 h. For comparison, normal aluminide coating was also produced using pure Al2O3 acting as filler. Effect of Y2O3 on the coating microstructure and oxidation resistance at 900 °C was comparably investigated. The results indicated that the entrapped Y2O3 particles not only significantly refined the grain of aluminide coatings but also promoted the formation of a dense, adherent and continuous α-Al2O3 layer. With the oxidation, the Y2O3 particles, after being swept by the inward-growing alumina scale, partially dissolves to produce Y cations. The segregation and migration of Y cations along the short-circuit path hinder the outward diffusion of Al, thus further decrease the scaling rate.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Intermetallics and Advanced Alloy Properties · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Aluminizing and chromizing bed treatment by CVD in a fluidized bed reactor on austenitic stainless steels10.1016/S0257-8972(99)00355-2 ↗
2. Microstructural aspect and oxidation resistance of an aluminide coating on 310 stainless steel10.1016/S0040-6090(00)00723-9 ↗
3. Preparation and oxidation of an Al2O3-modified aluminide coating10.1016/j.vacuum.2011.12.024 ↗
4. Oxidation behavior of Hf-modified aluminide coatings on Haynes-188 at 1050°C10.1016/j.surfcoat.2012.07.091 ↗
5. Microstructure and high temperature oxidation behavior of Pt-modified aluminide bond coats on Ni-base superalloys10.1016/j.pmatsci.2012.08.002 ↗
6. Cyclic oxidation of an ultrafine-grained and CeO2-dispersed δ-Ni2Al3 coating10.1016/j.corsci.2009.10.034 ↗
7. A fundamental aspect of the growth process of alumina scale on a metal with dispersion of CeO2 nanoparticles10.1016/j.corsci.2011.02.014 ↗
8. Pfeil · 1937
9. Influence of reactive element oxide coatings on the high temperature oxidation behavior of alumina-forming alloys10.1023/B:OXID.0000025331.25452.35 ↗
10. Effect of Y2O3 or CeO2 fillers on the oxidation behavior of aluminide coatings by low-temperature pack cementation10.1016/S1875-5372(16)60007-3 ↗
11. Fabrication and cyclic oxidation of Y2O3/CeO2-modified low temperature aluminide coatings
12. Relationship between pack chemistry and aluminide coating formation for low-temperature aluminisation of alloy steels10.1016/j.actamat.2006.05.032 ↗
13. Comparison of the dry and wet oxidation at 900 °C of η-Fe2Al5 and δ-Ni2Al3 coatings10.1016/j.corsci.2010.10.003 ↗
14. Formation and oxidation performance of low-temperature pack aluminide coatings on ferritic–martensitic steels10.1016/j.surfcoat.2009.09.063 ↗
15. Preparation and oxidation of an Y2O3-dispersed chromizing coating10.1016/j.vacuum.2007.10.010 ↗
16. Oxidation behavior of aluminide coatings on carbon steel with and without electrodeposited Ni-CeO2 film by low-temperature pack cementation10.1016/j.vacuum.2011.06.009 ↗
17. A theoretical investigation of alpha-Fe2O3-Cr2O3 solid solutions10.1039/B815907F ↗
18. Discontinuous oxidation and erosion oxidation of a CeO2 dispersion-strengthened chromium coating10.1016/j.corsci.2010.02.009 ↗
19. Advances in coating design for high-performance gas turbines10.1557/mrs2003.194 ↗
20. The oxide-scale growth and failure on an Fe-16Cr alloy in the presence of compressive stress10.1007/s11085-016-9611-6 ↗
21. Oxidation of low-carbon, low-silicon mild steel at 450-900°C under conditions relevant to hot-strip processing10.1023/A:1013390628475 ↗
22. Initial oxidation and chromium diffusion. I. effects of surface working on 9-20% Cr steels10.1016/j.corsci.2003.09.004 ↗
23. Effect of grain refinement on the resistance of 304 stainless steel to breakaway oxidation in wet air10.1016/j.actamat.2005.07.019 ↗
24. Experimental observations in support of the dynamic segregation theory to explain the reactive-element effect10.1007/BF01046818 ↗
25. Oxidation of a La2O3-modified aluminide coating10.1016/S1359-6462(01)00666-2 ↗
26. The oxidation behavior of NiAl. Part 1. phase transformations in the alumina scale during oxidation of NiAl and NiAl-Cr alloys10.1016/0010-938X(92)90002-K ↗
27. Transient oxidation in Fe-Cr-Ni alloys: a Raman-scattering study10.1007/BF01048636 ↗
28. Rapid formation of α-Al2O3 scale on an Fe–Al alloy by pure-metal coatings at 900°C10.1007/s11085-009-9184-8 ↗
29. Acceleration of metastable to alpha transformation of Al2O3 Scale on Fe–Al alloy by pure-metal coatings at 900°C10.1007/s11085-010-9219-1 ↗
30. The reactive element effect of ceria particle dispersion on alumina growth: a model based on microstructural observations10.1038/srep29593 ↗
31. Peg Formation by short-circuit diffusion in Al2O3 scales containing oxide dispersions10.1149/1.2124044 ↗
32. On the reasons for the effects of dispersions of stable oxides and additions of reactive elements on the adhesion and growth-mechanisms of chromia and alumina scales-the “sulfur effect”10.1007/BF00656731 ↗