Solar cell fabrication using two-step textured quasi-single crystalline silicon by alkaline and RIE texturing processes
Source abstract
Abstract
Abstract After alkaline chemical texturing process, SF6/O2 reactive ion etching (RIE) was used for maskless textured Si surface independently from crystal orientation. Additional RIE texturing on alkaline textured Si surface increased the light receiving areas and decreased the surface reflectance by random pyramidal structures with a width of hundreds of nanometers. The weighted average reflectance (WAR) of the textured Si surface by two-step texturing processes was achieved as low as 9.6% in the 300–1200 nm wavelength range. Compared to the alkaline texturing, the alkaline and RIE texturing of front Si surfaces decreased the WAR by 6%. By means of two-step texturing processes for quasi-single crystalline silicon (QSC-Si) surfaces, performance parameters of the solar cell such as conversion efficiency, short circuit current density (Jsc), open circuit voltage (Voc) and fill factor (FF) were examined in 18.2%, 36.6 mA/cm2, 624 mV and 79.7%, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Nanowire Synthesis and Applications · Silicon Nanostructures and Photoluminescence · Thin-Film Transistor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Effects of silver nanoparticles on the firing behavior of silver paste on crystalline silicon solar cells10.1016/j.colsurfa.2014.11.018 ↗
2. Dye-sensitized solar cells with 13% efficiency achieved through the molecular engineering of porphyrin sensitizers10.1038/nchem.1861 ↗
3. High-efficiency nanostructured window GaAs solar cells10.1021/nl402680g ↗
4. Advances in crystalline silicon solar cell technology for commercial mass production10.1038/asiamat.2010.82 ↗
5. A continuous Czochralski silicon crystal growth system10.1016/S0022-0248(02)02241-8 ↗
6. Gas flow effect on global heat transport and melt convection in Czochralski silicon growth10.1016/S0022-0248(02)02109-7 ↗
7. Mono-crystalline growth in directional solidification of silicon with different orientation and splitting of seed crystals10.1016/j.jcrysgro.2012.04.035 ↗
8. Precipitates caused by prolonged high-temperature annealing in floating zone silicon wafer grown from Czochralski single-crystal rod10.1016/j.mssp.2013.01.020 ↗
9. Hydrodynamical aspects of the floating zone silicon crystal growth process10.1016/j.jcrysgro.2013.12.066 ↗
10. Feasibility of directional solidification of silicon ingot by electromagnetic casting10.1016/j.mssp.2011.12.006 ↗
11. Problems and recent advances in melt crystal growth technology10.1016/j.jcrysgro.2011.11.049 ↗
12. Improved multicrystalline silicon ingot crystal quality through seed growth for high efficiency solar cells10.1002/pip.1221 ↗
13. Characterization of defects in mono-like silicon wafers and their effects on solar cell efficiency10.1016/j.solmat.2013.09.020 ↗
14. Seed-assisted cast quasi-single crystalline silicon for photovoltaic application: Towards high efficiency and low cost silicon solar cells10.1016/j.solmat.2012.02.024 ↗
15. Relationship between dislocation density and nucleation of multi-crystalline silicon10.1016/j.actamat.2010.01.042 ↗
16. Silicon feedstock for the multi-crystalline photovoltaic industry10.1016/S0927-0248(01)00147-7 ↗
17. Bulk multicrystalline silicon growth for photovoltaic (PV) application10.1016/j.jcrysgro.2007.11.194 ↗
18. Mono-like silicon ingots grown on low angle misoriented seeds: Defect characterization by synchrotron X-ray diffraction imaging10.1016/j.actamat.2015.01.012 ↗
19. Control of Grain Boundary Propagation in Mono-Like Si: Utilization of Functional Grain Boundaries10.7567/APEX.6.025505 ↗
20. Casting single crystal silicon: novel defect profiles from BP Solars Mono2TM wafers
21. Influence of an insulation partition on a seeded directional solidification process for quasi-single crystalline silicon ingot for high-efficiency solar cells10.1016/j.solmat.2012.01.024 ↗
22. Monocrystalline-like silicon solar cells fabricated by wet and dry texturing processes for improving light-trapping effect10.1016/j.vacuum.2015.02.020 ↗
23. Optimizing seeded casting of mono-like silicon crystals through numerical simulation10.1016/j.jcrysgro.2012.04.033 ↗
24. Analysis of mono-cast silicon wafers and solar cells on industrial scale10.1016/j.egypro.2012.07.036 ↗
25. Reduction of polycrystalline grains region near the crucible wall during seeded growth of monocrystalline silicon in a unidirectional solidification furnace10.1016/j.jcrysgro.2011.11.084 ↗
26. Performance of solar cells fabricated from cast quasi-single crystalline silicon ingots10.1016/j.solener.2014.09.047 ↗
27. Optimisation of NaOH texturisation process of silicon wafers for heterojunction solar-cells applications10.1016/j.solener.2011.12.013 ↗
28. Efficiency improved by acid texturization for multi-crystalline silicon solar cells10.1016/j.solener.2010.10.020 ↗
29. The black silicon method. VIII. A study of the performance of etching silicon using SF6/O2-based chemistry with cryogenical wafer cooling and a high density ICP source10.1016/S0026-2692(01)00039-8 ↗
30. Surface texturing for silicon solar cells using reactive ion etching technique
31. Low temperature reactive ion etching of silicon with SF6/O2 plasmas
32. Chemistry studies of SF6/CF4, SF6/O2 and CF4/O2 gas phase during hollow cathode reactive ion etching plasma10.1016/j.vacuum.2014.03.003 ↗
33. Improvement of conversion efficiency of multicrystalline silicon solar cells by incorporating reactive ion etching texturing10.1016/j.solmat.2014.04.001 ↗
34. Random reactive ion etching texturing techniques for application of multicrystalline silicon solar cells10.1016/j.tsf.2013.02.045 ↗