journal article·2012-07

Substructure in the columnar crystals of the Ti0.45O0.20N0.35 oxynitride thin film

M.F. Hasaneen, D. Biro, L. Székely, P. Nemes-Incze, P.B. Barna

Vacuum· Volume 86· Issue 12
Publisher page

Abstract

Abstract In situ oxygen doping modifies both the morphology and texture of the TiN films. It has been found that beyond 15 at% oxygen doping the columnar morphology is preserved however the texture is changed to the . The detailed structure analysis of the Ti 0.45 O 0.20 N 0.35 oxynitride films prepared by reactive unbalanced magnetron sputtering (UBMS) in an argon/nitrogen/oxygen mixture atmosphere discovered a substructure in the bulk of the TiN(O) single crystal columns. In the cross sectional transmission electron microscopy (X-TEM) images the substructure is showing up in form of fibre-like morphology parallel to the axis of the columnar crystals and in a honeycomb-like supernetwork in the cross section of the single crystal columns in the plane view TEM specimens. The fibre-like substructure proceeds to the film surface and manifests itself in the morphology of the dome-shaped surface areas of the single crystal columns as revealed by atomic force microscopy analysis.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · ZnO doping and properties · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. Composition and chemical state of titanium nitride films obtained by different methods10.1016/0257-8972(94)90068-X ↗
2. Structure and electrical properties of magnetron sputtered Ti(ON) thin films: the case of TiN doped in situ with oxygen10.1016/j.jpowsour.2008.12.112 ↗
3. Characterization of Ti(NxOy) coatings produced by the arc ion plating method10.1016/S0257-8972(97)00309-5 ↗
4. Chemical composition, crystallographic structure and impedance spectroscopy of titanium oxynitride TiNxOy thin films10.1016/j.ssi.2010.07.021 ↗
5. Diffusion and chemical composition of TiNxOy thin films studied by Rutherford Backscattering Spectroscopy10.1016/j.susc.2010.03.010 ↗
6. The influence of the process mode of ion beam assisted deposition on oxygen impurities in titanium nitride films10.1016/0168-583X(91)96116-3 ↗
7. Preparation of magnetron sputtered TiNxOy thin films10.1016/S0257-8972(03)00416-X ↗
8. Preparation and characterization of titanium oxy-nitride thin films10.1016/j.apsusc.2007.02.179 ↗
9. Formation of thin TiNxOy films by using a hollow cathode reactive DC sputtering system10.1016/S0040-6090(00)01048-8 ↗
10. XPS and RBS investigation of TiNxOy films prepared by vacuum arc discharge10.1016/j.nimb.2011.11.010 ↗
11. Preparation of titanium oxynitride thin films by reactive sputtering using air/Ar mixtures10.1016/j.surfcoat.2008.04.094 ↗
12. Microstructure and mechanical properties of reactively sputtered Ti(O, N) coatings10.1016/j.ijrmhm.2007.11.005 ↗
13. Recent attempts to design new super- and ultrahard solids leads to nano-nized and nano-structured materials and coatings10.1166/jnn.2011.3815 ↗
14. Preparation of multilayered nanocrystalline thin films with composition-modulated interfaces10.1016/j.nima.2008.02.043 ↗
15. Effect of nitrogen concentration on microstructure and microhardness of nanostructured (Ti, Al, Si)N coatings, developed by d.c. reactive magnetron sputtering
16. Briggs · 1990 · vol. 1
17. Amorphous TiO2 in LP-OMCVD TiNxOy thin films revealed by XPS10.1016/S0169-4332(01)00220-3 ↗
18. Topographic kinetics and practice of low angle ion beam thinning
19. TEM sample preparation by ion milling/amorphisation10.1016/S0968-4328(99)00011-6 ↗
20. STM and AFM investigation of carbon nanotubes
21. The determination of surface plastic and elastic properties by ultra micro-indentation10.1088/0026-1394/28/6/004 ↗
22. Titanium nitride/vanadium nitride alloy coatings: mechanical properties and adhesion characteristics10.1016/j.surfcoat.2004.09.008 ↗
23. Deformation mechanisms operating during nanoindentation of TiN coatings on steel substrates10.1016/j.surfcoat.2004.04.002 ↗
24. Microstructure and nanohardness in a polycrystalline Zn deformed by high strain rate impact10.1016/j.matchar.2011.03.002 ↗