journal article·2012-04

Fabrication and characterization of heat and plasma treated SiC/Al2O3–YSZ feedstocks used for plasma spraying

Z.Y. Pan, Y. Wang, X.W. Li, C.H. Wang

Vacuum· Volume 86· Issue 10
Publisher page

Abstract

Abstract The SiC/Al 2 O 3 –YSZ (ZrO 2 + 8 wt.% Y 2 O 3 ) powders with different SiC particle sizes were fabricated and treated from spray drying, heat treatment, and plasma spraying. The morphology, phase composition, flowability and density of powders were analyzed. The sphericity and flowability of powders treated by plasma flame are increased greatly, and the particle surface is very smooth. The flowability and density of powder with nano SiC were evident better than those of powder with submicron SiC. The optimum flowability and compactness of powder with submicron SiC is obtained when the critical plasma spray parameter is 341 and 325, respectively. For nano size SiC, the optimum flowability and the maximum compactness of powders are obtained with critical plasma spray parameter of 341. The grain size of powders is increased after heat treatment and plasma spraying. The SiC is oxidized to SiO 2 in the powders after heat treatment and plasma spraying. The Y 2 O 3 dissolved from 8YSZ solid solution at higher critical plasma spray parameter. Besides, there is no phase transformation of ZrO 2 for powders. The metastable phase of Al 2 O 3 appeared in feedstocks with submicron SiC, but no metastable phase was formed in feedstocks with nano SiC particles, which nano SiC can hinder the formation of Al 2 O 3 metastable phase. The densification process and mechanism of reconstituted particles used for plasma spraying were analyzed from surface morphology, cross section and simulation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · High-Temperature Coating Behaviors · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. New design concept of structural ceramics – ceramic nanocomposites10.2109/jcersj.99.974 ↗
2. Toughening and strengthening mechanism of plasma sprayed nanostructured Al2O3-13 wt.%TiO2 coatings10.1016/j.surfcoat.2009.08.045 ↗
3. Tensile strength and microstructure of Al2O3–ZrO2 hypo-eutectic fibers10.1016/S0013-7944(01)00118-7 ↗
4. Sintering and grain-growth of ultrapure alumina10.1007/BF00351254 ↗
5. Grain-growth kinetics for alumina in the absence of a liquid-phase10.1111/j.1151-2916.1985.tb15259.x ↗
6. Microstructural characterization of Al2O3–SiC10.1016/S0955-2219(97)00103-9 ↗
7. Microstructure of Al2O3–SiC nanocomposite ceramic coatings prepared by high velocity oxy-fuel flame spray process10.1016/j.scriptamat.2003.12.011 ↗
8. Mechanical properties of Al2O3 + ZrO2 + nano-SiCp ceramic composites10.1016/0272-8842(95)00091-7 ↗
9. Plasma spheroidization of iron powders in a non-transferred DC thermal plasma jet10.1016/j.matchar.2007.06.011 ↗
10. Mullite/ZrO2 coatings produced by flame spraying10.1016/j.jeurceramsoc.2008.02.021 ↗
11. Thermal shock resistance of ceramics coatings10.1016/j.actamat.2007.02.007 ↗
12. From Aps to Hvof spraying of conventional and nanostructured titania powder powders: a study on the enhancement of the mechanical properties10.1016/j.surfcoat.2004.10.137 ↗
13. Suspension plasma sprayed composite coating using amorphous powder powder10.1016/j.apsusc.2009.01.038 ↗
14. Formation of TiO2 hollow microparticles by spraying water droplets into an organic solution of titanium tetraisopropoxide (Ttip) – effects of Ttip concentration and Ttip-protecting additives10.1016/j.powtec.2007.11.027 ↗
15. Treatment of non-equilibrium phenomena in thermal plasma flows10.1088/0022-3727/41/18/183001 ↗
16. Effects of process parameters on ultrafine SiC synthesis using induction plasmas10.1007/BF02766817 ↗
17. Fabrication and characterization of spray dried Al2O3–ZrO2–Y2O3 powders treated by calcining and plasma10.1016/j.powtec.2011.06.004 ↗
18. Preparation and characterization of rare earth modified nanocrystalline Al2O3/13 wt.%TiO2 powder for plasma spraying10.1166/jnn.2009.C175 ↗
19. Development and implementation of plasma sprayed nanostructured ceramic coatings10.1016/S0257-8972(01)01470-0 ↗
20. Microstructure and wear resistance of nanostructured Al2O3-8 wt.%TiO2 coatings plasma-sprayed with nanopowders10.1016/j.surfcoat.2006.01.052 ↗
21. Spray-drying of ceramics for plasma-spray coating10.1016/S0955-2219(00)00112-6 ↗
22. Low pressure plasma-sprayed Al2O3 and Al2O3/SiC nanocomposite coatings from different powder powders10.1016/S0955-2219(02)00207-8 ↗
23. Oxidation of SiC powders in SiC/alumina/zirconia compacts10.1016/S0272-8842(99)00102-9 ↗
24. Mechanism and Kinetics for growth of thin thermal SiO2 – introduction and historical-perspective
25. Oxidation of single-crystal silicon-carbide .1. Experimental studies10.1149/1.2086568 ↗
26. Strength and microstructure of sintered Si3N4 with rare-earth-oxide additions
27. Suspension and solution thermal spray coatings10.1016/j.surfcoat.2009.03.005 ↗
28. Experimental investigation of powder vaporization in thermal plasma jets10.1007/BF01447242 ↗
29. Thermal cycling life and thermal diffusivity of a plasma-sprayed nano structured thermal barrier coating10.1016/j.scriptamat.2004.07.024 ↗
30. The dependency of microstructure and properties of nanostructured coatings on plasma spray conditions10.1016/S0257-8972(00)00673-3 ↗
31. Nanocrystalline materials and coatings10.1016/j.mser.2004.07.001 ↗
32. Effect of plasma treatments on the adhesion properties of Pacvd α-SiC: H coatings on TA6V alloy10.1016/j.diamond.2006.11.063 ↗