Film thickness dependence on the optical properties of sputtered and UHV deposited Ti thin films
Source abstract
Abstract
Abstract Titanium films of different thicknesses were deposited on glass substrates, using planar magnetron sputtering at 313 K substrate temperature. Their optical properties were measured by spectrophotometry in the spectral range of 200–2500 nm. Kramers–Kronig method was used for the analysis of the reflectivity curves of Ti films to obtain the optical constants of the films. In order to compare the influence of thickness of Ti films prepared using two different PVD methods, namely sputtering and electron gun depositions on the optical properties of Ti films, the optical results of Savaloni and Kangarloo (2007) for Ti films produced using electron gun deposition under UHV condition at 313 K substrate temperature are incorporated in this work. The analysis of the residual stress in the sputter deposited films using sin 2 ψ technique and the nano-strain in the E. Gun deposited films obtained from X-ray diffraction line broadening analysis (Warren–Averbach method) showed consistency with the results obtained for optical functions and agreed well with the predictions of both structural zone model (SZM) and effective medium approximation (EMA) results. Therefore, a direct correlation between the optical properties and the processes involved in the evolution of thin films is established. The optical data, in particular the conductivity results for sputter deposited Ti films show more agreement with those of bulk sample (Lynch et al., 1975), while those of UHV E. Gun deposited films are more consistent with those of thin film sample (Johnson and Christy, 1974).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · High-Temperature Coating Behaviors · ZnO doping and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Savaloni · Eur Phys J Appl Phys · 2005 · 31 · 10110.1051/epjap:2005053 ↗
2. Savaloni · J Phys D Appl Phys · 2007 · 40 · 20310.1088/0022-3727/40/1/016 ↗
3. Sikkens · Thin Solid Films · 1983 · 108 · 22910.1016/0040-6090(83)90070-6 ↗
4. Kopacz · Z Metallkd · 1992 · 83 · 492
5. Claesson · Solar Energy Mater · 1990 · 20 · 45510.1016/0165-1633(90)90035-Y ↗
6. Johnson · Phys Rev B · 1974 · 9 · 505610.1103/PhysRevB.9.5056 ↗
7. Lynch · Phys Rev B · 1975 · 11 · 361710.1103/PhysRevB.11.3617 ↗
8. Wall · J Appl Phys · 1980 · 51 · 66110.1063/1.327322 ↗
9. 2005
10. Savaloni · J Phys D Appl Phys · 2006 · 39 · 223110.1088/0022-3727/39/10/036 ↗
11. 1987
12. Rosi · Phys Rev · 1972 · B5 · 388310.1103/PhysRevB.5.3883 ↗
13. Thornton · J. Vac Sci Technol · 1975 · 12 · 83010.1116/1.568682 ↗
14. Movchan · Phys Met Metall · 1969 · 28 · 83
15. Savaloni · Vacuum · 1992 · 43 · 96510.1016/0042-207X(92)90009-L ↗
16. Savaloni · Vacuum · 1995 · 46 · 16710.1016/0042-207X(94)E0033-U ↗
17. Messier · J Appl Phys · 1985 · 58 · 373910.1063/1.335639 ↗
18. Messier · J. Vac Sci Technol · 1986 · A4 · 49010.1116/1.573866 ↗
19. Barna · Thin Solid Films · 1998 · 317 · 2710.1016/S0040-6090(97)00503-8 ↗
20. Petrov · J. Vac Sci Technol · 2003 · A 21 · S11710.1116/1.1601610 ↗
21. Bruggeman · Ann Phys (Leipzig) · 1935 · 24 · 63610.1002/andp.19354160705 ↗
22. Aspnes · Phys Rev · 1980 · B21 · 329010.1103/PhysRevB.21.3290 ↗
23. Savaloni · Phil Mag · 2008 · 88 · 71110.1080/14786430801953142 ↗
24. Thompson · Annu Rev Mater Sci · 2000 · 30 · 15910.1146/annurev.matsci.30.1.159 ↗
25. Van Hove · Phys Rev · 1953 · 89 · 118910.1103/PhysRev.89.1189 ↗
26. Marple · Phys Rev Lett · 1962 · 8 · 8710.1103/PhysRevLett.8.87 ↗
27. Welch · Phys Rev · 1974 · B9 · 199310.1103/PhysRevB.9.1993 ↗
28. High · Phys Rev · 1970 · B1 · 242410.1103/PhysRevB.1.2424 ↗
29. Welch · Phys Rev · 1971 · s · 426110.1103/PhysRevB.4.4261 ↗