journal article·2015-10

RETRACTED: Influence of sintering temperature on the mechanical properties and thermal expansion of SiCp/Al–30Si composites

Zenglei Ni, Hongjian Zhao, Fuxing Ye

Vacuum· Volume 120
This record is marked as retracted by the source. Review the publisher’s notice before using its findings.
Publisher page

Abstract

This article has been retracted: please see Elsevier Policy on Article Withdrawal (http://www.elsevier.com/locate/withdrawalpolicy ). This article has been retracted at the request of the editors because of significant similarity between it and other published articles by the same author: • `Microstructure and strengthening mechanism of SiCp/Al-30Si composites prepared by vacuum hot-pressing sintering` by Wang A, Fang M, Hao S M, Xio J P, Transactions of Materials and Heat Treatment, 33(S2) (2012) 17-21, http://www.cnki.net/kcms/doi/10.13289/j.issn.1009-6264.2012.s2.004.html • `Influence of particulate cluster on mechanical properties of SiCp/Al-30Si composite` by Ni Z, Wang A, Ye F, Materials Science and Engineering of Powder Metallurgy, 20 (2015) 562-567, http://www.en.cnki.com.cn/Article_en/CJFDTotal-FMGC201504011.htm • `Influence of SiCP Surface Treatment on Microstructure and Performance of SiCP/Al-30Si Composite` by He H, Wang A, Cao D, Ni Z, Hot Working Technology 42(6) (2013) 114-116, http://www.cnki.net/kcms/doi/10.14158/j.cnki.1001-3814.2013.06.023.html The corresponding author Z. Ni takes full responsibility and apologizes for the error made.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. Fabrication of particle-reinforced magnesium composites by applying a spontaneous infiltration pressure10.1023/A:1018558612135 ↗
2. Machining of Al/SiC particulate metal-matrix composites: Part I: tool performance10.1016/S0924-0136(98)00054-5 ↗
3. Fracture behavior of particle reinforced metal matrix composites10.1016/j.compositesa.2007.10.018 ↗
4. Effect of SiC volume fraction and particle size on the fatigue resistance of a 2080Al/SiCp composite10.1007/s11661-998-0325-5 ↗
5. Tensile properties of short fiber-reinforced SiC/Al composites: Part II. Finite-element analysis10.1007/BF02782421 ↗
6. Microstructural characterization and tensile properties of hot pressed Al–SiC composites prepared from pure Al and Cu powders10.1016/S0921-5093(00)01656-7 ↗
7. Particulate reinforced metal matrix composites—a review10.1007/BF00544448 ↗
8. Crack and wear behavior of SiC particulate reinforced aluminum based metal matrix composite fabricated by direct metal laser sintering process10.1016/j.matdes.2010.06.020 ↗
9. Microstructures and mechanical properties of spark plasma sintered Al–SiC composites containing high volume fraction of SiC10.1016/j.msea.2010.07.043 ↗
10. An experimental and statistical study of interaction effects of matrix particle size, reinforcement particle size and volume fraction on the flexural strength of Al–SiCp composites by P/M using central composite design10.1016/j.msea.2012.03.066 ↗
11. Thermal expansion behaviour of aluminum matrix composites with densely packed SiC particles10.1016/j.compositesa.2008.01.011 ↗
12. Thermal expansion and dimensional stability of Al–Si matrix composite reinforced with high content SiC10.1016/j.matchemphys.2003.07.001 ↗
13. Investigation of mechanical and machinability properties of SiC particle reinforced Al-MMC10.1016/j.jmatprotec.2007.06.082 ↗
14. The Al-Si (aluminum-silicon) system10.1007/BF02868729 ↗
15. Precipitation of Si particles in a super-rapidly solidified Al–Si hypereutectic alloy10.1016/S0254-0584(03)00030-0 ↗
16. The effect of particle size and volume fraction of the reinforced phases on the linear thermal expansion in the Al–Si–SiCp system10.1016/j.matchemphys.2004.05.046 ↗
17. Microscopic examination of the interface region in 6061Al/SiC composites reinforced with as-received and oxidized SiC particles10.1007/BF02646993 ↗
18. Effects of particle size and distribution on the mechanical properties of SiC reinforced Al-Cu alloy composites10.1016/j.msea.2010.11.028 ↗
19. Effects of extrusion and particle volume fraction on the mechanical properties of SiC reinforced Al-Cu alloy composites10.1016/j.msea.2010.07.017 ↗
20. Effects of matrix microstructure and particle distribution on fracture of an aluminum metal matrix composite10.1016/0921-5093(89)90392-4 ↗
21. The influence of microstructure on the fracture behaviour of particulate metal matrix composites10.1016/0921-5093(91)90566-6 ↗
22. Micromechanical modeling of reinforcement fracture in particle-reinforced metal-matrix composites10.1007/BF02648860 ↗
23. Thermal expansion behavior of particulate metal-matrix composites10.1016/S0266-3538(97)00124-3 ↗
24. Thermal expansion behaviour of aluminium/SiC composites with bimodal particle distributions10.1016/S1359-6454(03)00126-5 ↗
25. Thermal expansion studies on aluminium-matrix composites with different reinforcement architecture of SiC particles10.1016/j.compscitech.2005.12.012 ↗
26. Thermal expansion and dimensional stability of alumina fibre reinforced aluminium alloys10.1016/0921-5093(91)90868-N ↗