journal article·2021-12

Effect of sintering temperature on the microstructure and properties of Ti/W–C reinforced Fe-based composites

Shuai Wang, Yingmin Li, Juan Wang, Zhibin Zheng, Tiegang Luo, Kaihong Zheng, Jun Long

Vacuum· Volume 194
Publisher page

Abstract

Abstract The effects of sintering temperature on the Ti/W–C phase evolution, microstructural change and wear properties of Fe-based composites were studied. The results show that Ti and W will generate unstable TixW1-x mesophase during the ball milling process, and the lattice constant of W increase from 3.1648 A to 3.5523 A. Furthermore, the in situ TiC and WC appear diffraction double peaks near the diffraction angle of 36° with the change of the sintering temperature. At the same time, as the sintering temperature approaches the Ti–Fe liquidus, the appearance of a large-sized reinforcing phase and the aggregation of Fe around it, synergistically improve the wear resistance of the material.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced materials and composites · Aluminum Alloys Composites Properties · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Selective laser remelting of in-situ Al2O3 particles reinforced AlSi10Mg matrix composite: densification, microstructure and microhardness10.1016/j.vacuum.2021.110365 ↗
2. The measurement of the adhesion force between ceramic particles and metal matrix in ceramic reinforced-metal matrix composites10.1016/j.compositesa.2015.05.025 ↗
3. Effects of manganese on diffusion and wear behavior of ZTA particles reinforced iron matrix composites in vacuum10.1016/j.vacuum.2020.109408 ↗
4. Characterization of interfacial layer of ZTA ceramic particles reinforced iron matrix composites10.1016/j.jallcom.2018.01.199 ↗
5. Effect of WC content on microstructure and mechanical properties of Ni3Al-bonded cermets10.1016/j.ceramint.2015.12.058 ↗
6. Microstructure evolution, recrystallization and tribological behavior of TiC/WC composite ceramics coating10.1016/j.vacuum.2019.04.049 ↗
7. Phase evolution and wear resistance of in-situ synthesized (Cr, W)23C6-WC composite ceramics reinforced Fe-based composite coatings produced by laser cladding10.1016/j.vacuum.2021.110242 ↗
8. In-situ synthesis of TiC/Fe alloy composites with high strength and hardness by reactive sintering10.1016/j.jmst.2017.03.006 ↗
9. Local composite reinforcements of TiC/FeMn type obtained in situ in steel castings10.1016/j.acme.2019.05.004 ↗
10. In situ synthesis WC reinforced iron surface composite produced by spark plasma sintering and casting10.1016/j.matlet.2017.09.005 ↗
11. The effect of volume fraction of WC particles on wear behavior of in-situ WC/Fe composites by spark plasma sintering10.1016/j.ijrmhm.2017.08.009 ↗
12. Microstructure and mechanical properties of Al/(Ti,W)C composites prepared by microwave sintering10.1016/j.jallcom.2013.12.016 ↗
13. New production of (Ti, W)C-based cermets toughened by in-situ formed WC and twinned (Ti, W)C platelets: carbonization of the Nix(Ti0.6, W0.4)4C-type η phases10.1016/j.jallcom.2017.09.339 ↗
14. Microstructure of (W,Ti)C–Co system containing platelet WC10.1016/j.msea.2010.06.056 ↗
15. The FeTi (Iron-Titanium) system
16. The same chemical state of carbon gives rise to two peaks in X-ray photoelectron spectroscopy10.1038/s41598-021-90780-9 ↗
17. C 1s peak of adventitious carbon aligns to the vacuum level: dire consequences for material's bonding assignment by photoelectron spectroscopy10.1002/cphc.201700126 ↗
18. X-ray photoelectron spectroscopy: towards reliable binding energy referencing10.1016/j.pmatsci.2019.100591 ↗
19. Reliable determination of chemical state in x-ray photoelectron spectroscopy based on sample-work-function referencing to adventitious carbon: resolving the myth of apparent constant binding energy of the C 1s peak10.1016/j.apsusc.2018.04.226 ↗
20. Preparation of zinc ferrite by high-energy ball-milling and microstructure characterization by Rietveld's analysis10.1016/S0254-0584(03)00169-X ↗
21. ≤Microstructural Changes of (Ti,W)C Solid Solution Induced by Ball Milling.(pdf)>,.
22. Evidence of linear lattice expansion and covalency enhancement in rutile TiO2 nanocrystals10.1063/1.1790596 ↗
23. Thermodynamic and lattice parameter calculation of TiCx produced from Al-Ti-C powders by laser igniting self-propagating high-temperature synthesis10.1016/j.msea.2006.12.075 ↗
24. In situ fabrication of titanium carbide particulates-reinforced iron matrix composites10.1016/j.matdes.2011.03.031 ↗
25. Development of an abrasion resistant steel composite with in situ TiC particles10.1016/S0043-1648(01)00790-6 ↗
26. An in situ (W,Ti)C–Ni composite fabricated by SHS method10.1016/j.jnoncrysol.2008.01.002 ↗
27. Microstructural temperature gradient-driven diffusion: possible densification mechanism for flash sintering of zirconia?10.1016/j.ceramint.2018.09.311 ↗
28. Nanocrystalline/nanosized manganese substituted nickel ferrites – Ni1−xMnxFe2O4 obtained by ceramic-mechanical milling route10.1016/j.ceramint.2015.11.155 ↗
29. Self-propagating exothermic reactions: the synthesis of high-temperature materials by combustion10.1016/0920-2307(89)90001-7 ↗
30. Fe–W–C thermodynamics and in situ preparation of tungsten carbide-reinforced iron-based surface composites by solid-phase diffusion10.1016/j.ijrmhm.2016.02.001 ↗
31. Improving wear resistance and friction stability of FeNi matrix coating by in-situ multi-carbide WC-TiC via PTA metallurgical reaction10.1016/j.surfcoat.2019.124957 ↗
32. Characterization of microstructures in inconel 625 using X-ray diffraction peak broadening and lattice parameter measurements10.1016/j.scriptamat.2004.03.017 ↗
33. Strain induced phase formation, microstructural evolution and bandgap narrowing in strained TiO2 nanocrystals grown by ball milling10.1016/j.jallcom.2016.03.154 ↗
34. Stability of (Ti,M)C (M=Nb, V, Mo and W) carbide in steels using first-principles calculations10.1016/j.actamat.2011.09.051 ↗
35. Effect of Mo addition on microstructure and mechanical properties of (Ti,W)C solid solution based cermets10.1016/j.ijrmhm.2013.11.004 ↗
36. On the quantitative analysis of secondary carbide and carbon in (Ti1−xMx)C solid solutions via XRD measurements10.1016/j.ijrmhm.2007.10.001 ↗