Design and experimental study of high-voltage pulsed penning discharge source with grid electrode
Source abstract
Abstract
Abstract A new design of high-voltage pulsed Penning discharge (HVPPD) source with grid electrode was proposed and investigated to provide a plasma channel for high current pulsed electron beam. The grid electrodes of concentric circle structure with different wire width, which were fabricated from stainless steel with thickness of 0.3 mm and shield rate ~10%. The pulsed Penning discharge process was inspected by means of high-voltage probe and digital camera. The results demonstrated that one whole Penning discharge process can be divided into two main stages, i.e. activating and high-current stages with different duration and intensity depending on the working parameters applied. The transport distance of plasma reached several decades of centimeters. With the higher magnetic field strength and working pressure, the HVPPD process operated more quickly and steadily. Comparatively, the grid electrode with 0.3 mm wire width exhibited the better discharge performance. Under the optimum condition of anode voltage 4.8 kV, magnetic field 0.18 T, working pressure 7 × 10−2 Pa and ballast resistor 20 Ω, the activating time was 21 μs and the repetitive accuracy can be controlled under 1 μs.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Pulsed Power Technology Applications · Plasma Diagnostics and Applications · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Microstructure and high temperature oxidation resistance of nickel based alloy GH4169 irradiated by high current pulsed electron beam10.1016/j.surfcoat.2016.11.041 ↗
2. The microstructure of Ta alloying layer on M50 steel after surface alloying treatment induced by high current pulsed electron beam10.1016/j.vacuum.2016.11.036 ↗
3. The microstructure and properties of Cr alloying layer after surface alloying treatment induced by high current pulsed electron beam10.1016/j.jallcom.2017.04.014 ↗
4. Surface modification of Cu-25Cr alloy induced by high current pulsed electron beam10.1016/S1003-6326(15)63801-8 ↗
5. High-current, pulsed electron beam sources with SiC nanowire cathodes10.1016/j.vacuum.2015.11.023 ↗
6. Shock wave induced nanocrystallization during the high current pulsed electron beam process and its effect on mechanical properties10.1016/j.matlet.2018.11.054 ↗
7. Characterization of high-current pulsed electron beam interaction with AISI 1045 steel and the microstructure evolution10.1016/j.procir.2017.12.047 ↗
8. Cross-sectional analysis of the graded microstructure and residual stress distribution in a TiNi alloy treated with low energy high-current pulsed electron beam10.1016/j.mtcomm.2018.08.018 ↗
9. Impact of electron beam surface modification on deformation behavior and fracture properties of TiNi shape memory alloy10.1016/j.msea.2018.10.113 ↗
10. Studies on surface topography and mechanical properties of TiN coating irradiated by high current pulsed electron beam10.1016/j.nimb.2018.09.003 ↗
11. Surface composite microstructure and improved mechanical property of YG10X cemented carbide induced by high current pulsed electron beam irradiation10.1016/j.ijrmhm.2018.09.016 ↗
12. Surface modification of Cu-W powder metallurgical alloy induced by high-current pulsed electron beam10.1016/j.powtec.2017.11.037 ↗
13. Degenerate and non-degenerate In2O3thin films by pulsed electron beam deposition10.1016/j.mssp.2018.07.024 ↗
14. Comparative study of high-power pulsed sputtering (HPPS) glow plasma techniques using Penning discharge and hollow-cathode discharge10.1016/j.surfcoat.2011.04.027 ↗
15. Enhanced corrosion property of W-Al coatings fabricated on aluminum using surface alloying under high-current pulsed electron beam10.1016/j.jallcom.2017.06.189 ↗
16. Improved corrosion resistance of Mg alloy AZ31B induced by selective evaporation of Mg using large pulsed electron beam irradiation10.1016/j.jmst.2018.12.004 ↗
17. Ion sources for large area processing (invited)10.1063/1.1150377 ↗
18. Review of supershort avalanche electron beam during nanosecond-pulse discharges in some gases10.1016/j.mre.2016.10.004 ↗
19. Optimization of a low-pressure hollow-anode electrical discharge for generation of high-current electron beams10.1088/0022-3727/38/2/013 ↗
20. Generation and transport of submillisecond intense electron beams in plasma cathode vacuum diodes10.1016/j.vacuum.2017.03.025 ↗
21. Generation of low-energy high-current electron beams in plasma-anode electron guns10.1134/S1063780X18010130 ↗
22. Surface treatment of aluminum by high current pulsed electron beam10.1016/S1567-1739(01)00017-7 ↗
23. Use of low energy,high-current electron beams for surface treatmentof materials10.1016/S0257-8972(97)00093-5 ↗
24. A wide-aperture, low-energy, and high-current electron beam source with a plasma anode based on a reflective discharge10.1007/s10786-005-0136-5 ↗
25. Design and experimental study of Penning discharge plasma anode for high current pulsed electron beam source10.1016/j.vacuum.2016.02.010 ↗
26. Investigation of the stability of the electron source with a multi-aperture plasma emitter generating a large cross-section electron beam
27. An electron source with a multiarc plasma emitter for obtaining submillisecond pulsed megawatt beams10.1134/S1063785014060261 ↗
28. High-current large-area uniform electron beam generation by a grid-controlled hollow anode with multiple-ferroelectric-plasma-source ignition10.1080/10519990600777077 ↗
29. Optimization of the plasma parameters for the high current and uniform large-scale pulse arc ion source of the VEST-NBI system10.1016/j.fusengdes.2016.03.023 ↗
30. Self-oscillating mode of electron beam generation in a source with a grid plasma emitter10.1134/S1063784213100101 ↗
31. Extension of the gas-pressure operating range and increase in the lifetime of the plasma cathode grid of an ion source10.1134/S1063784207030036 ↗
32. Li · 2004 · vol.70 · 1
33. A Magnetic fi eld design for a Penning ion source for a 200 keV electrostatic accelerator10.1016/j.nima.2017.01.028 ↗
34. Low-pressure discharges with hollow cathode and hollow anode and their applications10.1088/1361-6463/aacf10 ↗
35. TiN-nanorod-coated carbon fiber cathode for high-current-density electron emission10.1016/j.vacuum.2019.01.037 ↗
36. Characteristics of polymer velvet as field emitters under high-current pulsed discharge10.1016/j.apsusc.2008.11.076 ↗