journal article·2019-07

Comparative numerical study of the dynamics, ion beam and flow energetics of fast and slow focus modes in a 2 kJ plasma focus operated in various gases

S.H. Saw, V. Damideh, O.H. Chin, J. Ali, P.C.K. Lee, R.S. Rawat, S. Lee

Vacuum· Volume 165
Publisher page

Abstract

Abstract Comparative study of fast focus mode (FFM) and slow focus mode (SFM) of INTI Plasma Focus device at 12 kV, based on Lee Model, are presented in this paper. Results of numerical experiments for D, Ne, and Ar gases at different pressure ranges show that as a rule-of-thumb, diameter-optimized SFM is considered to occur when fast plasma stream speed generated by pinch column is equal to the peak axial phase speed. SFM occurs at the high-pressure range of operation when beam ion energy is typically less than a few keV. Results of speed factor, fast ion beam energy, FPS energy, FIB damage factor, plasma footprint radius for FFM and SFM at different pressures of D, Ne, and Ar are presented. These results may be used to predict different applications of both modes: for example, the intense beam and flow energetics in FFM may be of interest in irradiation of surfaces for damage studies; whilst in SFM, the larger area of reduced intensity of plasma flow and very low energy per beam ion result in more uniform irradiation over a larger area of target. This larger more uniform area of irradiation has distinct advantages in nanophase material synthesis by diameter-optimized SFM.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Laser-Plasma Interactions and Diagnostics · Ion-surface interactions and analysis · Pulsed Power Technology Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. IAEA-TECDOC-1708 · 2013
2. Dense magnetized plasma and its applications: review of the 3-year activity of the IAEA Co-ordinated research programme
3. Using Mather-type plasma focus device for surface odification of AISI304 Steel
4. Hassan · 2006 · vol. 81 · 291
5. Design and construction of the 5 kJ filippov-type plasma focus with brass anode10.1007/s10894-011-9403-6 ↗
6. Design and fabrication of 11.2 kJ mather-type plasma focus IR-MPF-1 with high drive parameter10.1007/s10894-011-9427-y ↗
7. In-line and following-up tests of perspective fusion-reactor materials in plasma focus devices10.1007/s10582-006-0452-4 ↗
8. High-energy-density pinch plasma: a unique non-conventional tool for plasma nanotechnology10.1109/TPS.2012.2228009 ↗
9. Scientific status of plasma focus research
10. A 160 kJ dual plasma focus (DuPF) for fusion-relevant materials testing and nano-materials fabrication
11. The slow focus mode in plasma focus for fast plasma stream nano-materials fabrication: selection of energy of bombarding particles by pressure control
12. Chan · 2008
13. Comparison of measured neutron yield versus pressure curves for FMPF-3, NX2 and NX3 plasma focus machines against computed results using the lee model code10.1007/s10894-014-9824-0 ↗
14. Fully kinetic simulations of dense plasma focus Z-pinch devices10.1103/PhysRevLett.109.205003 ↗
15. The dense plasma focus: a versatile dense pinch for diverse applications10.1109/TPS.2012.2222676 ↗
16. Numerical studies of the plasma focus10.1063/1.1693700 ↗
17. A lumped parameter model of plasma focus10.1109/TPS.2004.827573 ↗
18. "Radiation in plasmas", vol II, ed. by B. McNamara
19. Laser and plasma technology
20. Lee
21. Plasma focus radiative model: review of the lee model code10.1007/s10894-014-9683-8 ↗
22. Rosenbluth · 1957 · p57
23. The formation of high-density z-pinches10.1088/0029-5515/18/6/008 ↗
24. Estimation of the plasma sheath thickness and particle number density in the axial phase of plasma coaxial accelerator10.1016/j.vacuum.2017.01.027 ↗
25. Pinch current limitation effect in plasma focus
26. Current and neutron scaling for megajoule plasma focus machines10.1088/0741-3335/50/10/105005 ↗
27. Numerical experiments on radiative cooling and collapse in plasma focus operated in krypton10.1007/s10894-012-9522-8 ↗
28. SXR measurements in INTI PF operated in neon to identify typical (normal N) profile for shots with good yield
29. Optimizing UNU/ICTP PFF plasma focus for neon soft X-ray operation10.1109/TPS.2009.2022167 ↗
30. Neutron yield saturation in plasma focus: a fundamental cause10.1063/1.3246159 ↗
31. Scaling laws for plasma focus machines from numerical experiments10.4236/epe.2010.21010 ↗
32. Lee · Plasma Focus Ion Beam Fluence and Flux –Scaling with Stored Energy · 2012 · 19 · 112703
33. Computing plasma focus pinch current from total current measurement10.1063/1.2899632 ↗
34. Dimensions and lifetime of the plasma focus pinch10.1109/27.533118 ↗
35. Plasma focus ion beam fluence and flux –for various gases10.1063/1.4811650 ↗
36. Soto · Phys. Plasmas · 2014 · 21 · 12270310.1063/1.4903471 ↗
37. Akel · J. Fusion Energy · 2016 · 35 · 69410.1007/s10894-016-0092-z ↗
38. Hassan · J. Phys. D Appl. Phys. · 2007 · 40 · 76910.1088/0022-3727/40/3/013 ↗
39. Mohanty · Jpn. J. Appl. Phys. · 2007 · 46 · 303910.1143/JJAP.46.3039 ↗
40. Comparison of measured and computed beam ion current densities emitted from two 2 kJ plasma focus machines10.1016/j.vacuum.2016.12.005 ↗
41. Model parameters versus gas pressure in two different plasma focus devices operated in argon and neon10.1007/s10894-011-9414-3 ↗
42. Soto · Phys. Plasma. · 2014 · 21 · 12270310.1063/1.4903471 ↗
43. Damage study of irradiated tungsten using fast focus mode of a 2.2 kJ plasma focus10.1016/j.vacuum.2017.07.002 ↗
44. Fast Faraday cup for fast ion beam TOF measurements in deuterium filled plasma focus device and correlation with Lee model10.1063/1.4985309 ↗