Fabricating Cu(In,Ga)Se2 (CIGS) thin films with large grains based on the quaternary CIGS targets
Source abstract
Abstract
Abstract H 2 Se gas is able to enhance the grain size of CuInSe 2 near the surface and have limited effects on the grains inside the thin films. The thickness of the high qualified crystal layer (HQCL) near the surface has connection with Cu content of the thin film. Increasing the Cu content can effectively enhance the length of HQCL. To enhance the crystallinity of Cu(In,Ga)Se 2 , the 1600 nm-thickness CIGS thin films were fabricated by bilayer annealed strategy, where the first annealed layer CIGS is 1100 nm with the Cu content of 0.97 and the second 600 nm-thickness annealed layer CIGS with the Cu content of 0.82. Our results show that the bilayer annealed 1600 nm-thickness CIGS thin films have better crystallinity than the single layer annealed 1600 nm-thickness ones. Cells based on the bilayer annealed CIGS have higher current density and the conversion efficiency is up to 13.0%, much higher than 10.5%, which is the single layer annealed CIGS solar cells.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. Solar cell efficiency tables (version 48)10.1002/pip.2788 ↗
2. Effects of heavy alkali elements in Cu(In,Ga)Se2 solar cells with efficiencies up to 22.6%10.1002/pssr.201600199 ↗
3. A 21.5% efficient Cu(In,Ga)Se2 thin-film concentrator solar cell10.1002/pip.424 ↗
4. Chalcogenide solar cells fabricated by co-sputtering of quaternary CuIn0.75Ga0.25Se2 and in targets: another promising sputtering route for mass production10.1016/j.jallcom.2016.05.199 ↗
5. A promising sputtering for in situ fabrication of CIGS thin films without post-selenization10.1016/j.jallcom.2014.05.002 ↗
6. The relationships between electronic properties and microstructure of Cu(In,Ga)Se2 films prepared by sputtering from a quaternary target10.1016/j.matlet.2014.09.020 ↗
7. Fabrication of Cu(In, Ga)Se2 thin films by sputtering from a single quaternary chalcogenide target10.1002/pip.1001 ↗
8. Comparison of Cu(In, Ga)Se2 thin films deposited on different preferred oriented Mo back contact by RF sputtering from a quaternary target10.1007/s00339-014-8334-2 ↗
9. CIGS thin films for Cd-Free solar cells by one-step sputtering process10.1007/s11664-014-3108-3 ↗
10. Effect of annealing temperature on properties of RF sputtered Cu(In,Ga)Se2 thin films10.1016/j.apsusc.2012.05.034 ↗
11. CIGS absorbing layers prepared by RF magnetron sputtering from a single quaternary target10.1016/j.ceramint.2016.06.067 ↗
12. Quaternary sputtered Cu(In,Ga)Se2 absorbers for photovoltaics: a review10.1109/JPHOTOV.2016.2566883 ↗
13. Surface evolution of sputtered Cu(In,Ga)Se2 thin films under various annealing temperatures10.1007/s10854-015-2991-6 ↗
14. Cu(In,Ga)Se2-based solar cells prepared from Se-containing precursors10.1016/j.vacuum.2013.10.007 ↗
15. Effect of selenium content of CuInSex alloy nanopowder precursors on recrystallization of printed CuInSe2 absorber layers during selenization heat treatment10.1016/j.tsf.2014.10.003 ↗
16. Annealing treatment of Cu(In,Ga)Se2 absorbers prepared by sputtering a quaternary target for 13.5% conversion efficiency device10.1016/j.solener.2015.05.019 ↗
17. Multi-layer strategy to enhance the grain size of CIGS thin film fabricating by single quaternary CIGS target10.1016/j.jallcom.2017.03.142 ↗