journal article·2016-03Open access

The influence of the pressure on the microstructure of yttria-stabilized zirconia thin films deposited by dual magnetron sputtering

D. Depla, A. Besnard, J. Lamas

Vacuum· Volume 125

Abstract

Abstract Mixed oxide thin films, such as yttria-stabilized zirconia, deposited by dual reactive magnetron sputtering on a non-rotating substrate show a typical microstructure of bended, or tilted columns. Two effects define the tilt. The first effect is the compositional gradient over each column which results in a different lattice spacing. To accommodate this difference, the column bends. As such, the chemical composition has a major influence on the final columnar tilt. The second effect is ballistic shadowing which is controlled by the pressure-distance product. At higher pressure-distances, this second effect plays a more prominent role, and a different behaviour of the columnar tilt as a function of the film composition is noticed. The experimental trends can be understood by the use of a particle trajectory code which provides the angular and energy distribution of the atoms to a ballistic aggregation Monte Carlo code simulating the resulting microstructure.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: nanoparticles nucleation surface interactions · Electronic and Structural Properties of Oxides · High-pressure geophysics and materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (17)

Show source-provided references
1. Texture and microstructure in co-sputtered Mg-M-O (M = Mg, Al, Cr, Ti, Zr, and Y) films10.1063/1.4718431 ↗
2. The fictional transition of the preferential orientation of yttria-stabilized zirconia thin films10.1016/j.tsf.2012.10.061 ↗
3. Influence of the target-substrate distance on the growth of YSZ thin films10.1016/j.surfcoat.2013.10.018 ↗
4. Using the macroscopic scale to predict the nano-scale behavior of YSZ thin films10.1016/j.surfcoat.2013.10.034 ↗
5. Three-dimensional growth simulation: a study of substrate oriented films
6. On the formation of the porous structure in nanostructured a-Si coatings deposited by dc magnetron sputtering at oblique angles10.1088/0957-4484/25/35/355705 ↗
7. Thin-film deposition profiles using a ballistic aggregation model10.1007/BF00720691 ↗
8. Biaxial alignment in sputter deposited thin films10.1016/j.tsf.2006.06.027 ↗
9. Self-shadowing and surface diffusion effects in obliquely deposited thin films10.1016/S0040-6090(98)01154-7 ↗
10. Scaling during shadowing growth of isolated nanocolumns
11. Porosity control in zig-zag vapor-deposited films10.1016/j.tsf.2004.02.034 ↗
12. Morphological evolution of pulsed laser deposited ZrO2 thin films10.1063/1.3318604 ↗
13. Computer simulations of the early stage growth of Ge clusters at elevated temperatures, on patterned Si substrate using the kinetic Monte Carlo method10.1016/j.tsf.2013.03.031 ↗
14. The metal flux from a rotating cylindrical magnetron: a Monte Carlo simulation10.1088/0022-3727/41/20/205307 ↗
15. Magnetron sputter deposition as visualized by Monte Carlo modeling10.1016/j.tsf.2012.06.032 ↗
16. Crystallographic investigation of the iron films deposited obliquely by sputtering10.1016/0040-6090(88)90453-1 ↗
17. Effect of sputtering pressure on some properties of chromium thin films obliquely deposited