journal article·2007-06

Microstructural changes in the upper surface of austenitic steel induced by ion sputtering and gas nitriding

Jolanta Baranowska

Vacuum· Volume 81· Issue 10
Publisher page

Abstract

Abstract The results of investigations of the influence of ion sputtering parameters applied as a pre-treatment on the formation of a nitrided layer during gas nitriding are presented. Previous work had shown that a low reproducibility of layer composition occurred after gas nitriding, thought to be the result of uncontrolled variation of sputtering parameters during the plasma initiation. In the present studies a two-stage sputtering process in nitrogen at a pressure of 3–5 Pa was used: firstly for a few seconds to 1 min with the plasma parameters 1.8 kV and 3 mA/cm 2 , and secondly followed by sputtering with the parameters 1.35 kV, 0.5 mA/cm 2 for 15 min. The samples were gas nitrided immediately following these processes in 100% ammonia. It was found that even a few seconds of the first plasma treatment enabled magnetic “expanded austenite” to be formed in the layer. Surface layers were analysed using grazing angle X-ray diffraction (GXRD), light microscopy (LM), scanning electron microscopy (SEM), electron back scattered diffraction (EBSD), magnetic and atomic force microscopy (AFM and MFM) and electron probe micro analysis (EPMA) that revealed a complex microstructure. The results have emphasised the need for good control over plasma sputtering parameters in the initial process stage.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Ion-surface interactions and analysis · Diamond and Carbon-based Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. Ichii · Tech Rep Kansai Univ · 1986 · 27 · 135
2. Baranowska · Surf Coat Technol · 2004 · 180–181 · 14510.1016/j.surfcoat.2003.10.056 ↗
3. Baranowska J. The influence of cathode sputtering on the nitride layer growth, PhD thesis, Szczecin University of Technology, 2001.
4. Baranowska · Inz Mater · 2005 · 5 · 448
5. Baranowska J, Franklin SE. In: Proceedings of the international conference, Nordtrib, Helsingoer, Denmark, 2006. p. 11–67.
6. Baranowska · Mater Sci · 2005 · 3 · 226
7. Samandi · Surf Eng · 1995 · 11 · 156
8. He · Surf Coat Technol · 2003 · 163–164 · 33110.1016/S0257-8972(02)00611-4 ↗
9. Flis · Corr Sci · 2000 · 42 · 31310.1016/S0010-938X(99)00087-6 ↗
10. Wirharititz · Thin Solid Films · 2004 · 447–448 · 28910.1016/S0040-6090(03)01066-6 ↗
11. Maendl · J Appl Phys · 2002 · 91 · 973710.1063/1.1479749 ↗
12. Randal · 2000
13. Tarasiuk · Acta Mater · 2002 · 50 · 146710.1016/S1359-6454(02)00005-8 ↗
14. Angelini · Mater Sci Technol · 1988 · 2 · 33
15. Mitchell · Surf Coat Technol · 2003 · 165 · 10710.1016/S0257-8972(02)00741-7 ↗
16. Xiaolei · Surf Coat Technol · 2003 · 16 · 2242