journal article·2011-10

Effect of electrode architecture and process parameters on distribution of SiH3 in a PECVD system

Jianning Ding, Yazhi Zhao, Ningyi Yuan, Mingming Chen, Shubo Wang, Feng Ye, Biao Kan

Vacuum· Volume 86· Issue 3
Publisher page

Abstract

Abstract Computational fluid dynamics (CFD) was employed to investigate the effects of electrode architecture, the arrangement of multi-hollows on the surface of the porous electrode, electrode distance and gas flow rate on the distribution of SiH 3 molar fraction. A two-dimensional laminar flow coupled with heat transfer, multi-species chemistry are simultaneously calculated through CFD for improving the spatial distribution of SiH 3 in the axis-symmetrical reactor. The spatial distribution of SiH 3 can be optimized by means of porous electrode with the gas inlet at the bottom of the chamber, and SiH 3 mole fraction varies with the arrangement of holes on porous electrode. The best spatial distribution of SiH 3 is obtained at inter electrode distance of 10 mm and more SiH 3 can be got at the gas flow rate of 0.5 m/s compared to 0.1, 0.3, 0.8, 1 m/s.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Catalytic Processes in Materials Science · Advanced Combustion Engine Technologies · Electrohydrodynamics and Fluid Dynamics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (11)

Show source-provided references
1. High-rate growth of microcrystalline silicon films using a high-density SiH4-H2 glow-discharge plasma10.1016/j.tsf.2003.12.041 ↗
2. Simulations of the gas flux distribution for different gas showers and filament geometries on the large-area deposition of amorphous silicon by hot-wire CVD10.1016/S0022-3093(01)01175-9 ↗
3. Simulation and optimization of silicon thermal CVD through CFD integrating Taguchi method10.1016/j.cej.2007.05.042 ↗
4. Effect of electrode architecture on the growth and material properties of silicon thin film
5. Modified electrode architecture for efficient and air-stable polymer solar cells based on P3HT: PCBM
6. Effect of electrode separation on PECVD deposited nanocrystalline silicon thin film and solar cell properties10.1016/j.solmat.2010.01.017 ↗
7. Influence of gas supply and filament geometry on the large-area deposition of amorphous silicon by hot-wire CVD10.1016/S0040-6090(01)01208-1 ↗
8. Highly efficient microcrystalline silicon solar cells deposited from a pure SiH4 flow
9. Dependence of volume fraction of clusters on deposition rate of a-Si:H films deposited using a multi-hollow discharge plasma CVD method
10. Influence of Ar gas flow rate in organosilicon plasma for the fabrication of SiO: CH thin films by PECVD method
11. Effect of gas flow rates on PECVD-deposited nanocrystalline silicon thin film and solar cell properties10.1016/j.solmat.2007.09.013 ↗