Internal stress assisted nitrogen diffusion in plasma nitrided medical CoCr alloys
Source abstract
Abstract
Abstract The role of internal stress on nitrogen diffusion in medical CoCr alloys during plasma assisted nitriding at low temperature is analyzed by stress assisted diffusion model. The nitrogen diffusion model is based on the concept of the interaction between the compositionally induced internal stress and interstitial nitrogen. From a theoretical point of view, this is mean that the driving force for nitrogen diffusion in CoCr alloys is not only the concentration gradient, but also the gradient of the compositionally induced internal stress. This model was used to predict nitrogen behavior during coupled mass diffusion with stress in plasma nitrided CoCr ASTM F75 and L605 alloys. The calculated nitrogen depth profiles agree very well with experimentally observed ones. Good agreement between simulated and experimental results shows that the stress assisted model can describe the phenomenon of an anomalous diffusion of nitrogen in CoCr alloys. The concentration dependent diffusion coefficients of nitrogen in expanded austenite were determined by fitting the nitrogen experimental profiles in different CoCr alloys (ASTM F75 and L605).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Advanced materials and composites · Fusion materials and technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Reduced tribocorrosion of CoCr alloys in simulated body fluid after nitrogen insertion10.1016/j.surfcoat.2010.01.048 ↗
2. Effects of plasma nitriding on microstructure and tribological properties of CoCrMo alloy implant materials
3. Microstructure and tribological properties of plasma nitriding cast CoCrMo alloy10.1016/S1005-0302(12)60024-3 ↗
4. Effect of ion energy and chemistry on layer growth processes during nitriding of CoCr alloys10.1016/j.nimb.2009.01.083 ↗
5. Reduction of corrosion current of CoCr alloys by post PIII oxidation10.1016/j.surfcoat.2014.03.027 ↗
6. Effects of plasma nitriding on mechanical and tribological properties of CoCrMo alloy10.1016/j.surfcoat.2007.08.030 ↗
7. Metal ion release from nitrogen ion implanted CoCrMo orthopedic implant material10.1016/j.surfcoat.2005.08.113 ↗
8. Nitrogen diffusion in medical CoCrNiW alloys after plasma immersion ion implantation10.1016/j.surfcoat.2008.01.020 ↗
9. CoCrMo alloy treated by floating potential plasma assisted nitriding and plasma based ion implantation: influence of the hydrogen content and of the ion energy on the nitrogen incorporation10.1016/j.surfcoat.2010.01.050 ↗
10. Near surface analysis of duplex PII treated CoCr alloy10.1016/j.nimb.2012.11.052 ↗
11. Analysis of in situ XRD measurements for low energy ion beam nitriding of austenitic stainless steel10.1016/j.surfcoat.2014.03.047 ↗
12. Nitriding of steel surface by spraying pulsed – arc plasma jet under atmospheric pressure10.1016/j.matlet.2011.12.054 ↗
13. Relation between lattice expansion and nitrogen content in expanded phase in austenitic stainless steel and CoCr alloys10.1016/j.surfcoat.2010.12.046 ↗
14. Corrosion behavior of medical CoCr alloy after nitrogen plasma immersion ion implantation10.1016/j.surfcoat.2010.11.017 ↗
15. Magnetic layer formation on plasma nitrided CoCrMo alloy10.1016/j.surfcoat.2011.01.047 ↗
16. Okur · 2009
17. The nitrogen transport in austenitic stainless steel at moderate temperatures10.1063/1.126294 ↗
18. Surface processes and diffusion mechanisms of ion nitriding of stainless steel and aluminum10.1016/S0257-8972(00)01015-X ↗
19. Anomalous ion accelerated bulk diffusion of interstitial nitrogen10.1103/PhysRevLett.96.065901 ↗
20. Ion beam nitriding of single and polycrystalline austenitic stainless steel10.1063/1.1863455 ↗
21. Simulation of nitrogen concentration depth profiles in low temperature nitrited stainless steel
22. Low-temperature gaseous surface hardening of stainless steel: the current status10.3139/146.110202 ↗
23. Anisotropic ion-enhanced diffusion during ion nitriding of single crystalline austenitic stainless steel10.1063/1.3120912 ↗
24. Determination of the concentration dependent diffusion coefficient of nitrogen in expanded austenite10.3139/146.101729 ↗
25. Evaluation of diffusion coefficients from composition profiles – the influence of trapping10.4028/www.scientific.net/DDF.258-260.384 ↗
26. Determination of composition, residual stress and stacking fault depth profiles in expanded austenite with energy – dispersive diffraction10.1016/j.tsf.2012.06.029 ↗
27. The influence of stress on interstitial diffusion – carbon diffusion data in austenite revisited10.4028/www.scientific.net/DDF.297-301.1408 ↗
28. Influence of residual stress on diffusion-induced bending in bilayered microcantilever sensors10.1016/j.tsf.2010.01.033 ↗
29. Effects of self-induced mechanical stress in hydrogen sorption by metals, by EIS10.1016/S0013-4686(99)00157-7 ↗
30. Diffusion of hydrogen in self-stressed metals – transfer function spectroscopy approach10.1016/S0022-0728(00)00507-6 ↗
31. Stress induced nitrogen diffusion during of austenitic stainless steel10.1016/j.commatsci.2010.10.018 ↗
32. Modeling of stress induced nitrogen diffusion in nitrided stainless steel10.1016/j.surfcoat.2011.01.040 ↗
33. Swelling effect on stress induced and concentration dependent diffusion of nitrogen in plasma nitrided austenitic stainless steel10.1016/j.commatsci.2013.02.007 ↗
34. deGroot · 1962
35. Schmalzried · 1994
36. Avoiding ghost stress on reconstruction of stress and composition – depth profiles from destructive X-ray diffraction depth profiling10.1016/j.msea.2006.03.007 ↗
37. Computer simulation of multiphase binary diffusion in gas – solid type couples10.2320/matertrans.46.1248 ↗
38. Wear of CoCrMo alloys used in metal-on-metal hip joints: a tribocorrosion appraisal10.1016/j.wear.2012.11.061 ↗
39. 2009 · 69
40. Manova · 2014
41. Swelling of 316L austenitic stainless steel induced by plasma nitriding10.1007/s10853-011-5494-8 ↗
42. Plasma assisted nitriding of Ni – based superalloys with various microstructures10.1016/j.surfcoat.2013.07.060 ↗
43. Kinetics of microstructure evolution during gaseous thermochemical surface treatment10.1007/s11669-005-0045-0 ↗