journal article·2021-06

Characterization of carbonized magnesium formed in a low energy plasma focus device

A.R. Momen-Baghdadabad, F.M. Aghamir, D. Momen-Baghdadabad, S.M. Mousavi Khoie

Vacuum· Volume 188
Publisher page

Abstract

Abstract Carbon-ion deposition on magnesium substrate was performed using a low energy Mather-type plasma focus device. Deposition process was carried out at 0, 15, 30 and 45° angular position with respect to the device anode axis. X-ray diffraction (XRD) confirmed presence of Mg2C3, Mg (OH)2 and graphite crystals on the produced films. Field emission scanning electron microscope (FE-SEM) coupled to elemental mapping analysis from surface and cross section of the samples was performed. The analysis showed the formation of a multi-layer thin film, in which carbon nano particles (CNPs) covered the composite layer. The CNPs were formed by graphite crystals while the composite layer formed by combination of Mg2C3 and Mg (OH)2 crystals. The band gap energy of indirect transition (⁓1.75 eV) of Mg2C3 was extracted from optical measurements of UV–Visible spectrum. XRD and Raman spectroscopy were used to investigate the graphite crystal structure of CNPs at each deposition angle. The study indicates that the graphite crystal structure of the samples is consisted of nano-crystalline and reduced nano-crystalline graphite structures. X-ray photoelectron spectroscopy (XPS) was used to characterize the elemental composition of the surface structure. The presence of Mg2C3 and Mg (OH)2 in composite layer, nano-crystalline, and reduced nano-crystalline graphite in CNPs was identified by high resolution transmission electron microscopy (HR-TEM). Potentio-dynamic polarization test was used to analyze the corrosion resistance of the prepared thin films with respect to un-deposited substrate. The findings indicate that the thickness and the size of Mg2C3 crystals have direct effect on corrosion resistance parameters.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Diamond and Carbon-based Materials Research · Graphene research and applications · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. Performance summary on a high-power dense plasma focus x-ray lithography point source producing 70 nm line features in AlGaAs microcircuits10.1063/1.1771502 ↗
2. Study of x-ray emission from a table top plasma focus and its application as an x-ray backlighter10.1063/1.1287220 ↗
3. Absolute timing of a relativistic electron beam in a plasma focus10.1016/0375-9601(88)91048-1 ↗
4. Comparison of characteristics of pulsed ion beams emitted from different small PF devices
5. Characteristics of fast ion beam in neon and argon filled plasma focus correlated with lee model code10.1016/j.vacuum.2019.108916 ↗
6. Neutron emission from a fast plasma focus of 400 joules10.1063/1.1621460 ↗
7. Some generalised characteristics of the electro-dynamics of the plasma focus in its axial phase: illustrated by an application to independently determine the drive current fraction and the mass swept-up fraction10.1007/s10894-013-9658-1 ↗
8. Surface modification of AlFe1. 8Zn0. 8 alloy by using dense plasma focus10.1016/j.vacuum.2006.05.001 ↗
9. Crystallization of amorphous zirconium thin film using ion implantation by a plasma focus of 1 kJ10.1016/j.apsusc.2007.07.028 ↗
10. Effects of deposition angle on synthesis of amorphous carbon nitride thin films prepared by plasma focus device10.1016/j.apsusc.2018.08.154 ↗
11. Fabrication of magnesium silicide thin films by pulsed ion beam ablation in a 1.6 kJ plasma focus device10.1016/j.vacuum.2013.01.018 ↗
12. New carbon materials: biological applications of functionalized nanodiamond materials10.1002/chem.200700987 ↗
13. X-ray diffraction line profile analysis of nanocrystalline graphite10.1016/j.matchemphys.2008.04.024 ↗
14. Interpretation of Raman spectra of disordered and amorphous carbon10.1103/PhysRevB.61.14095 ↗
15. Structure and physical properties of plasma-grown amorphous hydrogenated carbon films10.1016/0040-6090(87)90343-9 ↗
16. Hardness and deformation of cemented tungsten carbide10.1016/0025-5416(78)90163-5 ↗
17. Preparation and catalytic properties of transition metal carbides and nitrides10.1016/0920-5861(92)80175-M ↗
18. Thermal conductivity of pure and impure silicon, silicon carbide, and diamond10.1063/1.1713251 ↗
19. Crystal structure of magnesium sesquicarbide10.1021/ic00041a018 ↗
20. High-pressure and high-temperature stability of antifluorite Mg2C by in situ X-ray diffraction and ab initio calculations10.1021/jp5010314 ↗
21. Synthesis of β-Mg2C3: a monoclinic high-pressure polymorph of magnesium sesquicarbide10.1021/ic500960d ↗
22. Correlation of current drop, filling gas pressure, and ion beam emission in a low energy Mather-type plasma focus device10.1063/1.3686753 ↗
23. Synthesis and characterization of mesoporous MgO by template-free hydrothermal method10.1016/j.materresbull.2013.11.031 ↗
24. A novel preparation of nanosized hexagonal Mg (OH) 2 as a flame retardant10.1016/j.partic.2015.01.007 ↗
25. Micromachined nanocrystalline graphite membranes for gas separation10.1016/j.carbon.2018.05.071 ↗
26. Bonding changes in compressed superhard graphite10.1126/science.1089713 ↗
27. Characteristics of tungsten layer deposited on graphite substrate by a low energy plasma focus device at different angular position10.1016/j.tsf.2019.06.009 ↗
28. Direct band gap gallium antimony phosphide (GaSb x P 1−x) alloys10.1038/srep20822 ↗
29. Raman spectrum of graphene and graphene layers10.1103/PhysRevLett.97.187401 ↗
30. Raman spectroscopy on amorphous carbon films10.1063/1.362745 ↗
31. General equation for the determination of the crystallite size L a of nanographite by Raman spectroscopy10.1063/1.2196057 ↗
32. Excimer laser assisted very fast exfoliation and reduction of graphite oxide at room temperature under air ambient for Supercapacitors electrode10.1016/j.apsusc.2017.08.029 ↗
33. Micromachined nanocrystalline graphite membranes for gas separation10.1016/j.carbon.2018.05.071 ↗
34. X-ray photoelectron spectroscopy: towards reliable binding energy referencing10.1016/j.pmatsci.2019.100591 ↗
35. C 1s peak of adventitious carbon aligns to the vacuum level: dire consequences for material's bonding assignment by photoelectron spectroscopy10.1002/cphc.201700126 ↗
36. Compromising science by ignorant instrument calibration—need to revisit half a century of published XPS data10.1002/ange.201916000 ↗
37. Reliable determination of chemical state in x-ray photoelectron spectroscopy based on sample-work-function referencing to adventitious carbon: resolving the myth of apparent constant binding energy of the C 1s peak10.1016/j.apsusc.2018.04.226 ↗
38. Towards reliable X-ray photoelectron spectroscopy: sputter-damage effects in transition metal borides, carbides, nitrides, and oxides10.1016/j.apsusc.2020.148599 ↗
39. Nanocrystalline hexagonal diamond formed from glassy carbon10.1038/srep37232 ↗
40. A structural corrosion-monitoring sensor based on a pair of prestrained fiber Bragg gratings10.1088/0957-0233/21/1/017002 ↗
41. Influence of interlayers on corrosion resistance of diamond-like carbon coating on magnesium alloy10.1016/j.surfcoat.2009.12.009 ↗
42. Electrochemical polarization I. A theoretical analysis of the shape of polarization curves10.1149/1.2428496 ↗