journal article·2020-12

Effect of AlN on microstructure, mechanical and thermophysical properties of NiAl/Fe based alloys prepared by vacuum hot-pressing sintering

Yaping Bai, Chao Cheng, Jianping Li, JiaJia Luo, Zhong Yang

Vacuum· Volume 182
Publisher page

Abstract

Abstract The effect of AlN content on the microstructure and mechanical properties of NiAl/Fe–x AlN (x = 0, 3, 5, 10, 15 wt%) alloys were investigated after mechanical alloying with subsequent vacuum hot-pressing sintering. The results showed that the AlN reinforced NiAl/Fe alloy contained B2-ordered NiAl phase, Fe phase and AlN phase. As the AlN content increased, the density of the material decreased gradually, and the hardness and thermal conductivity increased greatly. NiAl/Fe based alloys with 5 wt% AlN obtained higher compressive strength and Rockwell hardness. When the content of AlN was 15 wt%, the density was 5.42 g/cm3, which was 18.6% lower than that of NiAl/Fe alloy. When the content of AlN was 5 wt%, the hardness reached the maximum value of 59.5 HRC, which was 69.04% higher than that of NiAl/Fe alloy. The thermal conductivity of the material first increased and then decreased with the increasing AlN content. When AlN content was 10 wt%, its thermal conductivity was higher than others at each temperature, and the maximum was 34.75 W/(m·k) at 600 °C in the study.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · Advanced ceramic materials synthesis · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. Detection of cylinder pressure in diesel engines using cylinder head vibration and time series methods10.1007/s11804-007-7035-z ↗
2. Experimental instantaneous heat fluxes in the cylinder head and exhaust manifold of an air-cooled diesel engine10.1016/S0196-8904(99)00179-X ↗
3. Microstructural analysis of the failure of a cast iron cylinder head of a thermoelectrical plant motor10.1007/s11668-015-9954-3 ↗
4. The effect of laser power density on the fatigue life of laser‐shock‐peened 7050 aluminium alloy10.1111/j.1460-2695.2007.01180.x ↗
5. Ping · 2010
6. Thermo-mechanical fatigue property and life prediction of vermicular graphite iron10.1016/j.msea.2017.05.035 ↗
7. Microstructural analysis of the failure of a cast iron cylinder head of a thermoelectrical plant motor10.1007/s11668-015-9954-3 ↗
8. Mechanical properties of high density sintered compacts obtained by cold-working10.1016/S0026-0657(10)80084-0 ↗
9. Microstructure and mechanical properties of FeCoCrNiMnTi0.1C0.1 high-entropy alloy produced by mechanical alloying and vacuum hot pressing sintering10.1016/j.vacuum.2019.04.043 ↗
10. Densification and mechanical property of nanostructured NiAl produced by mechanical-alloying and spark-plasma sintering10.4028/www.scientific.net/MSF.449-452.1101 ↗
11. Study on preparation and mechanical property of nanocrystalline NiAl intermetallic10.1016/j.matdes.2013.07.052 ↗
12. Microstructure and mechanical properties of in situ NiAl–Mo2C nanocomposites prepared by hot-pressing sintering10.1016/j.msea.2013.06.078 ↗
13. Room temperature ductility of NiAl-strengthened ferritic steels: effects of precipitate microstructure10.1016/j.msea.2012.01.103 ↗
14. Neutron-diffraction study and modeling of the lattice parameters of a NiAl-precipitate-strengthened Fe-based alloy10.1016/j.actamat.2012.05.033 ↗
15. Effect of nano-NiAl phase on microstructure and mechanical and oxidation properties of Fe-based alloys
16. Ultrastrong steel via minimal lattice misfit and high-density nanoprecipitation10.1038/nature22032 ↗
17. Properties and microstructure of AlN prepared using alumina crucible and MoSi2 heating element10.1016/j.jallcom.2010.04.232 ↗
18. Thermal properties of diamond/Ag composites fabricated by eletroless silver plating10.1016/j.diamond.2010.11.017 ↗
19. Effect of hydrolysis of AlN particulates on corrosion behavior of Al/AlNp composite in neutral chloride solution10.1016/j.compositesa.2006.01.016 ↗
20. Processing and thermal properties of Cu-AlN composites10.4028/www.scientific.net/AST.65.100 ↗
21. Influence of oxygen and titanium modification of AlN surface on the properties of direct bonded AlN-Cu joints10.4028/www.scientific.net/AST.45.1537 ↗
22. Preparation and properties of nano-AlN particle dispersion strengthened Cu-matrix composite
23. 2010
24. Partial martensitic transformation of nanocrystalline NiAl intermetallic during mechanical alloying10.1016/j.jallcom.2009.03.156 ↗
25. Interface characteristics of cubic AlN film on MgO (100) substrate10.1016/j.vacuum.2015.04.043 ↗
26. Improved interfacial properties of thermal atomic layer deposited AlN on GaN10.1016/j.vacuum.2018.10.067 ↗
27. Properties and potential applications of two-dimensional AlN10.1016/j.vacuum.2020.109231 ↗
28. Influence of carbon-based nanofillers on the electrical and dielectric properties of ethylene vinyl acetate nanocomposites10.1002/pc.20788 ↗