journal article·2020-04

Preparation and characterization of novel Ti(Al)–TiB2/Ti3Al metallic-intermetallic laminated composites

Tongtong Zhang, Guodong Wang, Ying Shu, Guohua Fan, Peitong Ni, Lin Geng

Vacuum· Volume 174
Publisher page

Abstract

Abstract In this paper, we designed and prepared Ti(Al)–TiB2/Ti3Al laminated composites consisting of alternating Ti(Al) layers and TiB2/Ti3Al layers, which were realized by using Ti foils and TiB2/Al composite foils as raw materials, stacking, and reaction annealing. Phase transformation and microstructure evolution of laminated composites during reaction annealing were systematically investigated by means of optical microscope (OM), scanning electron microscope (SEM), transmission electron microscope (TEM) and X-ray diffraction (XRD). Formation mechanism of laminated structure was elucidated in details. The results showed that Ti(Al)–TiB2/Ti3Al laminated composites exhibited a significant increase in ductility while maintaining or even improving the tensile strength, in comparison with monolithic Ti3Al. It is expected that the design strategy can be extended to other brittle intermetallic compounds, such as Ni–Al and Fe–Al systems.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · Aluminum Alloys Composites Properties · Titanium Alloys Microstructure and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. Preparation of a novel layer-structured Ti3Al matrix composite sheet by liquid-solid reaction between Al foils and TiB/Ti composite foils10.1016/j.matdes.2016.04.009 ↗
2. Enhanced fracture toughness of TiBw/Ti3Al composites with a layered reinforcement distribution10.1016/j.msea.2016.06.026 ↗
3. Bimodal laminated Ti3Al matrix composite achieved by in situ formed Ti5Si3 reinforcements10.1016/j.msea.2017.09.074 ↗
4. Ordering transformations and mechanical properties of Ti3Al and Ti3Al-Nb alloys10.1007/BF02644857 ↗
5. An overview of monolithic titanium aluminides based on Ti3Al and TiAl10.1016/S0254-0584(01)00328-5 ↗
6. The effect of enamel coating on the oxidation behavior of Ti3Al-based intermetallics at 750°C in air10.1016/j.msea.2007.01.058 ↗
7. Microstructurally inhomogeneous composites: is a homogeneous reinforcement distribution optimal?10.1016/j.pmatsci.2015.01.002 ↗
9. Effect of B4C size on the fabrication and compression properties of in situ TiB2-Ti2AlC/TiAl composites10.1016/j.jallcom.2012.09.123 ↗
10. Formation of TiAl-Ti5Si3 and TiAl-Al2O3 in situ composites by combustion synthesis10.1016/j.intermet.2007.07.016 ↗
11. Mechanical properties and microstructure of Al2O3/TiAl in situ composites doped with Cr2O310.1016/j.msea.2011.01.006 ↗
12. Mechanical properties of (Ti2AlC+Ti3AlC)-TiAl ceramic-intermetallic laminate (CIL) composites10.1016/j.msea.2013.07.076 ↗
13. Vacuum induction melting and casting of TiAl-based matrix in-situ composites reinforced by carbide particles using graphite crucibles and moulds10.1016/j.vacuum.2019.108930 ↗
14. The conflicts between strength and toughness10.1038/nmat3115 ↗
15. Towards strength-ductility synergy through the design of heterogeneous nanostructures in metals10.1016/j.mattod.2017.02.003 ↗
16. Making strong nanomaterials ductile with gradients10.1126/science.1255940 ↗
17. Strong, tough and stiff bioinspired ceramics from brittle constituents10.1038/nmat3915 ↗
18. Review on superior strength and enhanced ductility of metallic nanomaterials10.1016/j.pmatsci.2018.02.002 ↗
19. Design for strength-ductility synergy of 316L stainless steel with heterogeneous lamella structure through medium cold rolling and annealing10.1016/j.vacuum.2018.08.049 ↗
20. A flake powder metallurgy approach to Al2O3/Al biomimetic nanolaminated composites with enhanced ductility10.1016/j.scriptamat.2011.05.022 ↗
21. Strong and tough metal/ceramic micro-laminates10.1016/j.actamat.2017.10.059 ↗
22. Compressive mechanical behavior of Al/Mg composite rods with different types of Al sleeve10.1016/j.actamat.2016.08.079 ↗
23. Revealing extraordinary tensile plasticity in layered Ti-Al metal composite10.1038/srep38461 ↗
24. Maximizing necking-delayed fracture of sandwich-structured Ni/Cu/Ni composites10.1016/j.scriptamat.2017.02.032 ↗
25. Plastic deformation behaviors of Ti-Al laminated composite fabricated by vacuum hot-pressing10.1016/j.vacuum.2018.05.021 ↗
26. Synthesis and microstructural characterization of Ti-Al3Ti metal-intermetallic laminate (MIL) composites10.1016/j.scriptamat.2004.09.010 ↗
27. Ductile-phase toughening in TiBw/Ti-Ti3Al metallic-intermetallic laminate composites10.1007/s11661-015-3025-y ↗
28. Fracture elongation of brittle/ductile multilayered steel composites with a strong interface10.1016/j.scriptamat.2008.07.020 ↗
29. Fabrication and characterization of in-situ TiAl matrix composite with controlled microlaminated architecture based on SiC/Al and Ti system10.1016/j.intermet.2013.07.004 ↗
30. Study of the microstructure modulation and phase formation of Ti-Al3Ti laminated composites10.1016/j.vacuum.2018.09.002 ↗
31. Al-Ti (Aluminum-Titanium)10.1007/BF02652171 ↗
32. Diffusion in the Ti-Al system10.1016/S1359-6454(99)00400-0 ↗
33. Deformation behavior of brittle/ductile multilayered composites under interface constraint effect10.1016/j.ijplas.2016.11.005 ↗
34. Fabrication of fully dense TiAl-based composite sheets with a novel microlaminated microstructure10.1016/j.scriptamat.2011.11.009 ↗