Structure and properties of coating obtained by Chemical Vapour Deposition with the laser microstructuring
Source abstract
Abstract
Abstract The aim of this work is to present the effect of synergy interaction hybrid surface treatment of tool ceramics using methods of CVD chemical coating deposition and selective laser texturing on the structure and properties of obtained hybrid surface layer. Comprehensive research results in scanning electron microscopy (SEM), morphology with atomic force microscope (AFM) as well as chemical composition of produced coatings with EDS scattered energy spectrometer are presented. Exploitative properties, including adhesion with the "scratch test" method, wear resistance using the "pin on disc" method, roughness were also tested. As a result of the research, it was found that the creation of a hybrid layer of the CVD coating/laser texturing on the tool ceramics contributes to the improvement of the exploitative properties of the tested material. The honeycomb texture (in the micro-scale) created as a result of the selective laser treatment with the nanoripples (in nano scale) causes a decrease in the friction coefficient and the width and depth of the wear. Nanoripples LIPSS are a barrier to the damage propagation in the coating after exceeding the critical load confirmed during the adhesion tests.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Laser Material Processing Techniques · High Entropy Alloys Studies · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. Forming of the surface structure and properties of tool's ceramic inserts with improved abrasion resistance
2. Structure and properties of the tool ceramics with hard wear resistant coatings10.1515/amm-2016-0209 ↗
3. Structure and properties of the wear resistant coatings obtained in the PVD and CVD processes on tool ceramics10.4028/www.scientific.net/MSF.513.119 ↗
4. Investigation studies involving wear resistant ALD/PVD hybrid coatings on sintered tool substrate10.17222/mit.2015.236 ↗
5. Internal stresses in PVD coated tool composites
6. Cr2N-7Ag nanocomposite thin films deposited on Vanadis 6 tool steel10.1016/j.apsusc.2014.03.044 ↗
7. Stabilisation of retained austenite in laser surface melted tool steels10.1016/j.msea.2004.06.069 ↗
8. Effect of laser treatment parameters on surface modification and tribological behavior of AISI 8620 steel10.1016/j.triboint.2017.03.036 ↗
9. Metallurgical aspects of laser surface processing of PM Cr-V ledeburitic steel10.1155/2011/563410 ↗
10. Microstructure and mechanical behavior of pulsed laser surface melted AISI D2 cold work tool steel10.1016/j.apsusc.2012.11.070 ↗
11. Laser surface melting of electro-metallurgic WC/steel composites10.1007/s10853-007-1798-0 ↗
12. Laser microstructuring for fabricating superhydrophobic polymeric surfaces10.1016/j.apsusc.2010.10.156 ↗
13. Picosecond-laser 4-beam-interference ablation as a flexible tool for thin film microstructuring10.1016/j.phpro.2011.03.113 ↗
14. Effect of polarization on femtosecond laser pulses structuring silicon surface10.1016/j.apsusc.2005.04.048 ↗
15. Microstructural analyses and wear behavior of the cemented carbide tools after laser surface treatment and PVD coating10.1016/j.apsusc.2013.06.033 ↗
16. Fabrication of micro/nano structures on metals by femtosecond laser micromachining10.3390/mi5041219 ↗
17. Periodical structures induced by femtosecond laser on metals in air and liquid environments10.1016/j.apsusc.2012.11.075 ↗
18. On the influence of surface plasmon-polariton waves on pattern formation upon laser ablation10.1016/j.apsusc.2013.01.103 ↗
19. 1064 nm nanosecond laser induced concentric rings and periodicripples structures at the exit surface of fused silica10.1016/j.apsusc.2014.04.179 ↗
20. Formation of laser-induced periodic surface structures (LIPSS) on toolsteel by multiple picosecond laser pulses of different polarizations10.1016/j.apsusc.2016.06.174 ↗
21. Laser surface treatment of multicrystalline silicon for enhancing optical properties10.1016/j.jmatprotec.2007.11.278 ↗