journal article·2017-08

Microstructure of reactive magnetron sputtered S-phase coatings with a diffusion sub-layer

Sebastian Fryska, Jolanta Baranowska

Vacuum· Volume 142
Publisher page

Abstract

Abstract The main objective of the work was to investigate the microstructure of S-phase coatings obtained by reactive magnetron sputtering at different temperatures and with various nitrogen concentrations in the working atmosphere. Particular attention was paid to the formation of a diffusion sub-layer in the austenitic substrate. The coatings were deposited on austenitic stainless steel substrates in an argon–nitrogen gas mixture. Three different nitrogen concentrations in the working gas were used in the experiments (15, 33 and 50 vol.%), and five substrate temperatures (200, 250, 300, 350 and 400 °C). The phase composition was evaluated using X-ray diffraction (XRD). X-ray microanalysis (WDS) and glow discharge emission spectroscopy (GDOES) techniques were used to study the nitrogen content and distribution in the coatings. The microstructure was investigated using a scanning electron microscope (SEM). Formation of the S-phase diffusion sub-layers was observed in the atmospheres containing 50 and 33 vol.% N2 respectively at temperatures of 300 and 350 °C or higher. Nitrogen diffusion into the substrate also occurred with the 15 vol% N2 atmosphere at 350 °C or higher although no supersaturated solution was formed in these conditions.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · Metal and Thin Film Mechanics · High-Temperature Coating Behaviors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. The stability of the nitrogen S-phase in austenitic stainless steel
2. Plasma nitriding of stainless steel at low temperature10.1016/S0257-8972(99)00084-5 ↗
3. Low temperature plasma nitriding of 316 stainless steel a nature of S-phase and its thermal stability10.1179/026708401101517746 ↗
4. Baranowska · 2007
5. The properties of hard coating composed of S-phase obtained by PVD method
6. Basic properties of sputtered 310 stainless steel-nitrogen coatings10.1016/0257-8972(90)90104-K ↗
7. Optimization of the surface mechanical strength of AISI 316L physically vapour deposited nitrogen-doped coatings on AISI 316L substrate10.1016/0257-8972(93)90127-A ↗
8. Optimalization of contact mechanical strength of magnetron-sputtered nitrogen-doped AISI 316L physically vapour deposited coatings10.1016/0257-8972(93)90333-J ↗
9. On the nature, properties and wear response of S-phase (nitrogen alloyed stainless steel) coatings on AISI 316L
10. Chemical structure and corrosion behavior of S-phase coatings10.1179/026708410X12550773057947 ↗
11. Properties of sputtered stainless steel nitrogen coatings and structural analogy with low temperature plasma nitride layers on austenitic steel10.1016/0921-5093(91)90500-M ↗
12. Characterisation of mechanical properties of S-phase coatings produced by magnetron sputtering deposition
13. The damage tolerance of S-phase coated biomedical grade stainless steel10.1016/j.wear.2006.10.025 ↗
14. Deposition and characterization of nitrogen containing stainless steel coatings prepared by reactive magnetron sputtering10.1016/0042-207X(96)00143-1 ↗
15. The pressure influence on the properties of S-phase coatings deposited by reactive magnetron sputtering10.12693/APhysPolA.123.854 ↗
16. Thermal expansion and phase transformation of nitrogen-expanded austenite studied with in situ synchrotron X-ray diffraction10.1107/S1600576714005214 ↗
17. Characteristic of the nitrided layers on the stainless steel at low temperature10.1016/j.surfcoat.2003.10.056 ↗
18. On the crystallographic structure of S-phase10.1016/j.scriptamat.2003.09.042 ↗
19. The influence of temperature and nitrogen pressure on S-phase coatings deposition by reactive magnetron sputtering10.1016/j.vacuum.2012.03.054 ↗
20. Temperature effect of nitrided stainless steel coatings deposited by reactive DC-magnetron sputtering10.1016/j.tsf.2004.08.101 ↗
21. Reactive magnetron sputtering of Inconel 690 by Ar–N2 plasma10.1016/j.tsf.2007.07.212 ↗
22. S-phase coatings produced by unbalanced magnetron sputtering10.1179/sur.1996.12.1.61 ↗
23. Formation of an MN-type cubic nitride phase in reactively sputtered stainless steel-nitrogen films10.1016/j.jcrysgro.2004.03.066 ↗
24. High rate thick film growth10.1146/annurev.ms.07.080177.001323 ↗
25. Can oxygen stabilize chromium nitride?—characterization of high temperature cycled chromium oxynitride10.1016/S0040-6090(03)01066-6 ↗
26. Characteristic of the nitrided layers on the stainless steel at low temperature10.1016/j.surfcoat.2003.10.056 ↗
27. Tribocorrosion resistance of nitrogen stabilized stainless steel coatings
28. Importance of surface activation for nitrided layer formation on austenitic stainless steel10.1179/026708410X12550773058027 ↗