Influence of simulated heat-affected zone thermal cycle treatment on mechanical performances and microstructural stability of Ni–17Mo–7Cr based superalloy
Source abstract
Abstract
Abstract In the work, a Ni–17Mo–7Cr (wt.%) based superalloy was prepared, and its high-temperature (800 °C) mechanical properties and microstructural stability was evaluated when subjecting to the treatment of simulated heat-affected zone (HAZ) thermal cycle. The results reveal that a lamellar-like structure, which occurs in the alloy, is actually the mixture of Ni matrix and carbides (mainly MoC). When the peak temperature is elevated up to 1350 °C during the HAZ simulation, an equivalent excellent mechanical property is obtained relative to that of the alloy without treatment, due to formation of the typical structures in the alloy. After tensile tests, the hybrid fracture behavior appears on the fracture surfaces, in which the inter-granular fracture with torturous fracture surfaces in company with the ductile fracture are concurrently found. At last, the simulated microstructure can maintain its stability during the tests of isothermal stress relaxation. Based on the results of tensile tests and stress relaxation, we can infer that the simulated microstructure can preserve its excellent mechanical properties and stability at high temperatures.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · High-Temperature Coating Behaviors · Advanced Materials Characterization Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Mechanical properties of Inconel 625 laser cladded coatings: depth sensing indentation analysis10.1016/j.msea.2014.01.026 ↗
2. Improvement of wear resistance of Hastelloy C-276 through laser surface melting10.1016/j.matdes.2012.10.024 ↗
3. Microstructures, mechanical properties and corrosion resistance of Hastelloy C22 coating produced by laser cladding10.1016/j.jallcom.2012.10.193 ↗
4. Plastic strain localization and fatigue micro-crack formation in Hastelloy X10.1016/j.msea.2012.10.072 ↗
5. Coherent Ni2(Cr, Mo) precipitates in Ni-21Cr-17Mo superalloy10.1016/j.jallcom.2013.01.098 ↗
6. Effects of rare earth yttrium on microstructure and properties of Ni-16Mo-7Cr-4Fe nickel-based superalloy10.1016/j.matchar.2014.06.016 ↗
7. The effect of silicon on precipitation and decomposition behaviors of M6C carbide in a Ni-Mo-Cr superalloy10.1016/j.jallcom.2014.09.112 ↗
8. The effects of helium on hydrogen isotope retention in Hastelloy N10.1016/j.jnucmat.2010.12.214 ↗
9. Hemispherical total emissivity of Hastelloy N with different surface conditions10.1016/j.jnucmat.2012.03.026 ↗
10. Long-term corrosion behaviors of Hastelloy N and Hastelloy B3 in moisture-containing molten FLiNaK salt environments10.1016/j.jnucmat.2013.11.045 ↗
11. Precipitation behavior of grain boundary M23C6 and its effect on tensile properties of Ni-Cr-W based superalloy10.1016/j.msea.2012.03.092 ↗
12. McCoy · 1973 · 10
13. Microstructural characterization of Haynes 242 alloy10.1016/S0921-5093(01)01882-2 ↗
14. Microstructure stability and mechanical properties of an age-hardenable Ni-Mo-Cr alloy subjected to long-term exposure to elevated temperature10.1016/j.matchar.2010.04.008 ↗
15. Phase and structural transformations in the Ni65Mo20Cr15 alloy at changing the temperature of heat treatment10.1016/j.jallcom.2013.11.100 ↗
16. Optimization of mechanical properties of a Ni-Mo-Cr alloy by structural modifications induced by changes in heat treatment10.1016/S0921-5093(01)01104-2 ↗
17. Strengthening domains in a Ni-21Cr-17Mo alloy10.1016/j.scriptamat.2006.09.011 ↗
18. Influence of thermal exposure on the precipitates and mechanical properties of a newly developed Ni-21Cr-17Mo alloy10.1016/j.msea.2012.09.108 ↗
19. McCoy · 1964 · 54
20. McCoy · 1966 · 21
21. Mechanisms of stress relief cracking in titanium stabilized austenitic stainless steel10.1016/j.jnucmat.2003.08.034 ↗
22. Microstructural evolution of a Ni-based superalloy (617B) at 700 °C studied by electron microscopy and atom probe tomography10.1016/j.actamat.2011.11.020 ↗
23. Temperature dependence of MC decomposition behavior in Ni-base superalloy GTD 11110.1016/j.msea.2007.06.010 ↗
24. Effect of thermal exposure on the stability of carbides in Ni-Cr-W based superalloy10.1016/j.msea.2010.11.088 ↗
25. Isaratat · 2007
26. Stress relaxation and strain-age cracking in rené 41 weldments
27. Briggs · 1965 · 95
28. Floreen · 1994
29. Microstructurally inhomogeneous composites: is a homogeneous reinforcement distribution optimal?10.1016/j.pmatsci.2015.01.002 ↗
30. C-Cr segregation at grain boundary before the carbide nucleation in Alloy 69010.1016/j.matchar.2012.02.008 ↗
31. The mechanism of stress-relief cracking in a ferritic alloy steel