journal article·2012-02

Numerical assessment of plume heat and mechanical loads and contamination on multi-layer insulation in hard vacuum

Gennady Markelov, Rolf Brand, Georg Ibler, Wolfgang Supper

Vacuum· Volume 86· Issue 7
Publisher page

Abstract

Abstract The paper presents a numerical analysis of plume exhausted from the 10 N bipropellant thruster. The computations have been performed for steady state and pulse mode firing of the thruster. The plume impinges a multi-layer insulation (MLI) that covers a satellite surface, where plume effects have been computed for ideal and bulged shapes of the MLI. The ideal shape is a circular cylinder surface, where the bulge is a deflection of the MLI due to satellite spin. Plume effects, pressure and heat flux, are almost doubled for the bulged MLI. An engineering model based on experimental data has been applied. It was shown that it is conservative against the numerical modeling in the plume backflow. An application of the pulse mode leads to a formation of droplets. One of the sources of the droplets is a rupture of liquid film at the nozzle lip. A parametric study with different droplet sizes and initial velocities has been performed for thrusters firing along and against the satellite spin. The thruster that fires against the satellite spin contaminates the MLI more than the other thruster. Droplets with an initial velocity smaller than 6 m/s cannot contaminate the MLI.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Gas Dynamics and Kinetic Theory · Rocket and propulsion systems research · Spacecraft and Cryogenic Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (15)

Show source-provided references
1. Trinks H. Experimental exhaust plume analysis with MBB 10 N thruster. American Institute of Aeronautics and Astronautics (AIAA) Paper 83-1259; 1983.10.2514/6.1983-1259 ↗
2. Trinks H. Experimental investigation of bipropellant exhaust plume flowfield, heating and contamination, and comparison with the CONTAM computer model predictions. AIAA Paper 83-1447; 1983.10.2514/6.1983-1447 ↗
3. Trinks H. Experimental investigation of the exhaust plume flow fields of various small bipropellant and monopropellant thrusters. AIAA Paper 87-1607; 1987.10.2514/6.1987-1607 ↗
4. Rebrov S, Gerasimov Y. Investigation of the contamination properties of bipropellant thrusters. AIAA Paper 2001-2818; 2001.10.2514/6.2001-2818 ↗
5. Gas-dynamic aspects of the contamination problem at the international space station 1. Model experiments
6. Rise of a near-wall liquid film over the outer surface of a nozzle accompanying supersonic gas flow into vacuum10.1134/1.1686884 ↗
7. Ivanov MS, Khotyanovsky DV, Kudryavtsev AN, Vashchenkov PV, Markelov GN, Schmidt AA. Numerical study of backflow for nozzle plumes expanding into vacuum. AIAA Paper 2004-2687; 2004.10.2514/6.2004-2687 ↗
8. Golovachev YP, Ivanov MS, Khotyanovsky DV, Kudryavtsev AN, Reznikov BI, Smirnovsky AA, et al. Multiphase three component nozzle flow (model validation). In: Nittaanmali, Rossi, Korotov, Onate, Periaux, Knorzer, editors. Proc. ECCOMAS 2004.
9. Alexeenko AA, Wadsworth DC, Gimelshein SF, Ketsdever AD. Numerical modeling of ISS thruster plume induced contamination environment. In: Optical System Contamination (AM405), SPIE 49th Annual Meeting, Denver, CO; August 2004.10.1117/12.559059 ↗
10. Gordon S, McBride BJ. Computer program for calculation complex chemical equilibrium composition and applications. NASA Reference publication 1311; 1994.
11. Plume impingement analysis for Aeolus spacecraft and gas/surface interaction models10.2514/1.24425 ↗
12. Bird · 1994
13. 2006
14. Ivanov MS, Markelov GN, Gimelshein SF. Statistical Simulation of Reactive Rarefied Flows: Numerical Approach and Applications. AIAA Paper 98-2669, Albuquerque; June 1998.10.2514/6.1998-2669 ↗
15. Landau · 1976