journal article·2006-11

Analysis of additional leakage resulting from the feeding motion of a vacuum-compatible air bearing stage

Gyungho Khim, Chun-Hong Park, Husang Lee, Seung-Woo Kim

Vacuum· Volume 81· Issue 4
Publisher page

Abstract

A rise in pressure is generated when a vacuum-compatible air bearing stage moves in a vacuum condition. This study analyzed this pressure rise phenomenon theoretically and verified it experimentally. Results indicate that the pressure rise was caused by additional leakage resulting from stage velocity, along with adsorption and outgassing of gas molecules from the guide rail surface. Tilting of the stage had a negligible effect because the tilting time was very short. Additional leakage caused by stage velocity was inevitable if the stage incorporated mechanical movements, but rises in pressure caused by adsorption and outgassing could be suppressed by coating the guide rail surface with titanium nitride, to which gas molecules are less likely to adhere. The results also indicate that the pressure rise ratio increased when the air bearing stage operated under high-vacuum conditions.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Lubricants and Their Additives · Tribology and Lubrication Engineering · Tribology and Wear Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. The vertical traverse stage in vacuum condition
2. Nikon electron projection lithography system: mechanical and metrology issues
3. Using air bearings in vacuum to control stage vibration
4. Yokomatsu T, Furukawa M. Static pressure bearing. US Patent no. US 4,749,283. 1988.
5. Watson DC, Novak WT. Air bearing linear guide for use in a vacuum. US Patent no. US 6,467,960. 2002.
6. Higuchi A, Kato T, Iwaski K. Slide apparatus and its stage mechanism for use in vacuum. US Patent no. US 6,510,755. 2003.
7. Sogard MR, Spicer DF. Air bearing operable in a vacuum region. US Patent no. US 6,126,169. 2000.
8. Sogard MR. Fluid bearing operable in a vacuum region. US Patent no. US 6,402,380. 2002.
9. Shinohara S, Tsuda T, Hayashida T. Hydrostatic gas bearing, hydrostatic gas bearing device for use in vacuum environment, and gas recovering method for the hydrostatic gas bearing device. US Patent no. US 2003/0002756. 2003.
10. Static characteristics of aerostatic porous rectangular thrust bearings10.1016/0043-1648(82)90106-5 ↗
11. Analysis of externally pressurized, double-pad, gas porous thrust bearing10.1115/1.3254521 ↗
12. Roth · 1982
13. Bae · 2000
14. A stratified flow model for calculating the conductance of long tubes with constant cross section10.1016/S0042-207X(00)00414-0 ↗
15. Conductance calculation of long tubes with rectangular cross section and annular cross section in the full pressure range
16. Analysis of ultra-thin gas film lubrication based on linearized Boltzmann equation: first report-derivation of a generalized lubrication equation including thermal creep flow10.1115/1.3261594 ↗
17. A database for interpolation of Poiseuille flow rates for high Knudsen number lubrication problems10.1115/1.2920234 ↗
18. Chebyshev expansions for Abramowitz functions10.1016/0168-9274(92)90035-C ↗
19. Treatment of the wall materials of extremely high vacuum chamber for dynamical surface analysis10.1116/1.578746 ↗