High speed micro-fabrication using inductively coupled plasma ion source based focused ion beam system
Source abstract
Abstract
Abstract A compact inductively coupled plasma ion source based focused ion beam system (ICP-FIB), capable of producing intense FIB of gaseous elements is developed. Ar and Xe ion beams of 20–4700 nA are focused to spot sizes in the range of 2–30 μm. Experiments using Ar and Xe ion beams of a few microamperes showed milling speeds that are 25–150 times higher than that of a conventional FIB. Milling of micro-apertures in less than 100 s through 100 μm thick Ta and Mo foils and in less than 10 s through 12 μm gold and 25 μm aluminum foils is demonstrated. In this article, the potential of ICP-FIB in high speed milling of micro apertures and large scale micro patterns are presented. Also the possibility of high speed synthesis of nano-pores with tunable pore sizes is discussed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Surface Polishing Techniques · Integrated Circuits and Semiconductor Failure Analysis · Ion-surface interactions and analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. Microfabrication by ion milling: the lathe technique10.1116/1.587769 ↗
2. Microfabrication techniques using focused ion beams and emergent applications10.1016/S0968-4328(99)00008-6 ↗
3. Micromilling of metal alloys with focused ion beam – fabricated tools
4. Focused ion beam microscopy and micromachining10.1557/mrs2007.62 ↗
5. Low energy micron size beams from inductively coupled plasma ion source
6. High brightness inductively coupled plasma source for high current focused ion beam applications10.1116/1.2366617 ↗
7. Improvements in the angular current density of inductively coupled plasma ion source for focused heavy ion beams10.1016/j.vacuum.2013.04.008 ↗
8. Microfabrication of surface acoustic wave device using UV LED photolithography technique10.1016/j.mee.2014.03.011 ↗
9. Microfabrication of dielectric barrier discharge plasma actuators for flow control10.1016/j.sna.2013.06.005 ↗
10. Microfabrication and characterization of cylinder micropillar array electrodes
11. Applications of microfluidics in chemical biology10.1016/j.cbpa.2006.10.016 ↗
12. Applications, techniques, and microfluidic interfacing for nanoscale biosensing10.1007/s10404-009-0431-8 ↗
13. Manufacturing of metal-based microparts: fabrication strategies and surface engineering applications10.1016/j.surfcoat.2013.09.014 ↗
14. Batch fabrication of micro-coils for MR Spectroscopy on silicon
15. Development of plasma chip10.1016/S0257-8972(00)00982-8 ↗
16. Micrometer-scale machining: tool fabrication and initial results10.1016/S0141-6359(96)00024-4 ↗
17. Characterization of compact ICP ion source for focused ion beam applications10.1016/j.nima.2010.04.069 ↗
18. Optimization of ion energy spread in inductively coupled plasma source designed for focused ion beam applications10.1016/j.vacuum.2010.07.008 ↗
19. Drilling of fine apertures in thin metallic foils using a focused ion beam10.1016/0042-207X(93)90184-C ↗
20. Direct fabrication of nanopores in a metal foil using focused ion beam with in situ measurements of the penetrating ion beam current