Influence of plasmochemical modification of Al–Cu–Mg alloys on surface structure and functional properties
Source abstract
Abstract
Abstract The article presents the results of the study of the composition and selected functional properties of Al–Cu–Mg alloys modified by RF CVD technique (Radio-Frequency Chemical Vapor Deposition). The type and composition of the deposited SiNH and carbon doped SiNH layers was altered in the experiments. The samples were pre-treated with argon plasma etching and N+ ion implantation. On the basis of the experimental evidence it is concluded that the deposition of an anti-wear SiCNH coating (using SiH4:CH4:N2 = 1:1:2 gas mixture) improves both the investigated mechanical properties (hardness ca. 10 GPa, Young modulus ca. 95 GPa) and tribological performance of the control (unmodified) alloy sample as well as those of the modified alloy samples whose outer layer is SiNH.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Metallurgical and Alloy Processes · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Polmear · 2005
2. Kamal · 2012
3. Disbonding technology for adhesive reversible assembly in the automotive industry10.4028/www.scientific.net/MSF.765.766 ↗
4. Surface carburization of aluminum alloys by excimer laser10.1016/S0257-8972(01)01423-2 ↗
5. An investigation on the fatigue behaviour of Al 7075-T6 coated with titanium nitride using physical vapour deposition process10.1016/j.matdes.2012.02.056 ↗
6. Schumann · 2003 · 51
7. Inclusions in magnesium and its alloys: a review10.1179/1743280413Y.0000000017 ↗
8. How to weld titanium and its alloys successfully
9. Titanium use in aerospace applications
10. Wear resistant carbon coatings deposited at room temperature by pulsed laser deposition method on 7075 aluminium10.1016/j.vacuum.2013.03.015 ↗
11. Tribological behavior of gradient modified layer on 2024 aluminum alloy modified by plasma-based ion implantation10.1016/S0043-1648(03)00521-0 ↗
12. Selection strategies for materials and processes10.1016/S0261-3069(03)00159-6 ↗
13. Lining of light metals with hard powders using shot peening10.1016/S0924-0136(02)00309-6 ↗
14. HVOF thermal sprayed coatings on aluminium alloys and aluminium matrix composites10.1016/j.surfcoat.2005.02.124 ↗
15. Structure, mechanical and tribological properties of diamond-like carbon films on aluminum alloy by arc ion plating10.1016/j.vacuum.2011.10.019 ↗
16. Structural characteristics of 2024 aluminum alloy plasma-based ion implanted with nitrogen then titanium10.1016/j.apsusc.2004.06.145 ↗
17. Restoring the tensile properties of PVD-TiN coated Al 7075-T6 using a post heat treatment10.1016/j.surfcoat.2011.02.041 ↗
18. The influence of chemical groups on the mechanical properties of SiCNH coatings deposited on 7075 aluminum alloy10.1016/j.tsf.2013.01.055 ↗
19. Microstructure of Al-alloy surface implanted with high-dose nitrogen10.1016/S0257-8972(02)00123-8 ↗
20. Tribological properties of ion implanted aluminum alloys10.1016/S0042-207X(98)00214-0 ↗
21. Effect of age-hardening conditions on high-cycle fatigue performance of mechanically surface treated Al 202410.1016/j.msea.2006.07.169 ↗
22. Fatigue behaviour of 2011-T6 aluminium alloy coated with PVD WC/C, PA-CVD DLC and PE-CVD SiOx coatings10.1016/j.surfcoat.2009.03.040 ↗
23. Deposition of duplex Al2O3/TiN coatings on aluminum alloys for tribological applications using a combined microplasma oxidation (MPO) and arc ion plating (AIP)10.1016/j.wear.2005.01.029 ↗
24. Corrosion evaluation of microarc oxidation coatings formed on 2024 aluminium alloy10.1016/j.corsci.2010.04.022 ↗
25. Deposition of diamond-like carbon films on aluminium substrates by RF-PECVD technique: influence of process parameters10.1016/j.diamond.2006.04.001 ↗
26. The tribological properties of a gradient layer prepared by plasma-based ion implantation on 2024 aluminum alloy10.1016/j.surfcoat.2003.10.003 ↗
27. Fracture behavior of diamond-like carbon films on stainless steel under a micro-tensile test condition10.1016/j.diamond.2005.07.002 ↗
28. Thermal stability and tribological performance of DLC-Si O films10.1155/2011/483437 ↗
29. Evaluation of bacterial adhesion on Si-doped diamond-like carbon films10.1016/j.apsusc.2007.03.011 ↗
30. Reduction of bacterial adhesion on modified DLC coatings10.1016/j.colsurfb.2007.08.008 ↗
31. Comparison between FTIR and XPS characterization of amino acid glycine adsorption onto diamond-like carbon (DLC) and silicon doped DLC10.1016/j.apsusc.2013.02.070 ↗