journal article·2021-12

Development of latent fingermarks by unbalanced magnetron sputtering deposited ultra-thin metal film

Tao Wang, Qiannan Zhang, Shouming Yu, Guojun Zhang

Vacuum· Volume 194
Publisher page

Abstract

Abstract Thin metal films with thickness above 50 nm have been successful used for developing level 1 features of latent fingermarks. In order to easily show the level 2 and level 3 features of the fingermarks, thinner films are needed to be fabricated. Three kinds of metal films including cooper, chromium and aluminum with film thickness ranging from 5 nm to 30 nm were deposited by unbalanced magnetron sputtering. The efficacy of film thickness and metal type on developing latent fingermark was investigated. The most clearly developed fingermark was obtained by films with thickness of 10–20 nm. Cooper films exhibit better effects on showing Level 2 features than chromium and aluminum films with the same thickness. The optical contrast of fingermark ridges and valleys was influenced by the morphology difference of film deposited on ridge and valley areas, which were related to shadowing effect affected by film thickness and metal type determined re-emission effect.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Forensic Fingerprint Detection Methods · Digital and Cyber Forensics · Forensic and Genetic Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. A vacuum coating technique for the development of latent fingerprints on polythene,10.1016/S0015-7368(76)71040-5 ↗
2. Vacuum metal deposition and cyanoacrylate detection of older latent prints
3. Vacuum metal deposition: factors affecting normal and reverse development of latent fingerprints on polyethylene substrates10.1016/S0379-0738(00)00310-8 ↗
4. Vacuum metal deposition: developing latent fingerprints on polyethylene substrates after the deposition of excess gold10.1016/S0379-0738(01)00507-2 ↗
5. Comparison of the columnar-thin-film and vacuum-metal-deposition techniques to develop sebaceous fingermarks on nonporous substrates
6. A preliminary Study on vacuum metal deposition as a Standalone method for enhancement of fingermarks on ballistic brass materials10.1111/1556-4029.14052 ↗
7. Tiedge · M.N.McCormick, A. Lakhtakia, R. Roy, Massively parallel sequencing and STR analysis from partial bloody fingerprints enhanced with columnar thin films, Forens. Sci. Int.: Genetics · 2020 · 49 · 102369
8. Visualization of partial bloody fingerprints on nonporous substrates using columnar thin films10.1080/00085030.2014.987464 ↗
9. Visualisation of fingermarks and grab impressions on fabrics. Part 1: gold/zinc vacuum metal deposition10.1016/j.forsciint.2010.11.003 ↗
10. Optimized development of sebaceous fingermarks on nonporous substrates with conformal columnar thin films10.1111/1556-4029.12307 ↗
11. Chao-kai Yang, Jeh-Shane Liao, Sheng-Meng Wang, latent fingermark development using low-vacuum vaporization of ninhydrin10.1016/j.forsciint.2015.09.013 ↗
12. K.C.Wang, L.J. Pang, J.S. Liao, Development of latent fingerprint by ZnO deposition10.1016/j.forsciint.2010.07.035 ↗
13. Gang Qin, Yueping Zuo,Ting Zhang,Yang Zhang, Lei Su, Hong Qiu, Xueji Zhang, SECM imaging of latent fingerprints developed by deposition of Al-doped ZnO thin film10.1016/j.electacta.2012.06.030 ↗
14. Ridges: High-Resolution Fingerprint matching using level 3 features, IEEE. T. Pattern
15. Development of environmentally insulted fingermarks on nonporous forensically relevant substrates with conformal columnar thin films10.1080/00085030.2020.1799658 ↗
16. High-resolution topograms of fingerprints using multiwavelength digital holography10.1117/1.OE.56.3.034117 ↗
17. Development of latent fingerprints using preferential DC sputter deposition10.1016/0379-0738(94)01671-Q ↗
18. Paul T. Lynch,Sputter coating a viable alternative for the development of latent prints on non-porous surfaces
19. An efficient strategy to detect latent fingermarks on metallic surfaces10.1016/j.forsciint.2011.10.047 ↗
20. Silver-assisted development and imaging of fingermarks on non-porous and porous surfaces10.1016/j.ijms.2017.08.001 ↗
21. Sun · Surface morphology and optical properties of magnetron-sputtered ultrathin Al films,Vacuum · 2010 · 84 · 828
22. Structure and stress of Cu films prepared by high power pulsed magnetron sputtering10.1016/j.vacuum.2018.11.039 ↗
23. Thin film growth through sputtering technique and its applications
24. Ohring · 2001
25. Role of kinetic energy of sputtered particles in thin film formation10.1016/S0039-6028(97)00313-0 ↗
26. Mound formation in surface growth under shadowing. Phys. Rev. B10.1103/PhysRevB.74.125420 ↗
27. Thin-film growth dynamics with shadowing and re-emission effects10.1117/1.3543822 ↗
28. Surface roughening in shadowing growth and etching in 2+1 dimensions. Phys. Rev. B
29. Magnetron sputtering: a review of recent developments and applications10.1016/S0042-207X(99)00189-X ↗