journal article·2018-08

Influence of Ni, Fe and Co on the microstructure and properties of 75% Cu–25% Sn alloy in hot pressing

Ping Han, Xinpo Lu, Wenfeng Li, Wenjun Zou

Vacuum· Volume 154
Publisher page

Abstract

Abstract Ni, Fe and Co were added in 75% Cu–25% Sn alloys respectively for improving its microstructures and properties and decreasing the large weight loss of specimens in the high hot pressing temperature. Densification and mechanical tests were performed, and structures were investigated by X-ray diffraction, energy dispersive spectroscopy and scanning electron microscopy. When the hot pressing temperature was more than 700 °C, there were few weight loss of specimens with Ni added, a few weight loss of specimens with Fe added, and the large weight loss of specimens with Co added. All the Ni was dissolved in the Cu and δ-phase. Few Fe was dissolved in the Cu and δ-phase and most of Fe formed a single-phase. A portion of Co was dissolved in the Cu and δ-phase while the rest formed a single-phase. The fracture of all the specimens was brittle. The wear resistance and TRS increased due to the solution strengthening of Ni.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallurgy and Material Forming · Powder Metallurgy Techniques and Materials · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (14)

Show source-provided references
1. Diamond–metal interfaces in cutting tools: a review10.1007/s10853-011-6164-6 ↗
2. Influences of metal constituents to the characteristics and grinding abilities of metal bonded diamond wheel10.1016/S0924-0136(96)02620-9 ↗
3. Design of bronze-bonded grinding wheel properties10.1016/j.cirp.2016.04.096 ↗
4. Carbon reactivity of binder metals in diamond–metal composites characterization by scanning electron microscopy and X-ray diffraction10.1016/j.diamond.2013.07.002 ↗
5. The effect of sintering temperature on microstructure and mechanical properties of alloys produced by using hot isostatic pressing method10.1016/j.jallcom.2017.12.097 ↗
6. The role of the activator rich-W interboundary layer on liquid phase sintering of W–pre-alloy bronze composites of Fe and Co additions10.1016/j.ijrmhm.2012.04.016 ↗
7. Pressure assisted master sintering surface of Co, Cu and Fe powder mixture10.1016/j.powtec.2012.09.039 ↗
8. Structure, microstructure and mechanical properties of PM Fe-Cu-Co alloys10.1016/j.matdes.2009.07.027 ↗
9. Microstructure and properties of powder metallurgy Cu-1%Cr-0.65%Zr alloy prepared by hot pressing10.1016/j.vacuum.2016.06.008 ↗
10. Influence of hot pressing temperature on the microstructure and mechanical properties of 75% Cu–25% Sn alloy10.1016/j.matdes.2013.06.024 ↗
11. Optimized thermal conductivity of diamond/Cu composite prepared with tungsten-copper-coated diamond particles by vacuum sintering technique10.1016/j.vacuum.2018.03.052 ↗
12. Influence of Ti content on the microstructure and properties of graphite flake/Cu-Ti composites fabricated by vacuum hot pressing10.1016/j.vacuum.2017.04.026 ↗
13. The Cu–Sn phase diagram, Part I: new experimental results10.1016/j.intermet.2012.10.004 ↗
14. Correlation between the temperature dependence of yield stress and the nature of solute distribution in Cu–Ni solid solutions10.1016/j.jallcom.2010.03.122 ↗