journal article·2018-03

The influence of oxygen ratio on the plasma parameters of argon RF inductively coupled discharge

Yong Wang, Junfang Chen, Yan Wang, Wenwen Xiong

Vacuum· Volume 149
Publisher page

Abstract

Abstract In this paper, the RF-coupled plasma characteristics of argon and oxygen mixed gases were analyzed by emission spectra and Langmuir single probes. The experimental pressure was kept at 0.63 Pa, and the electron temperature and electron density were measured by Boltzmann curve method and Langmuir single probe respectively under different oxygen ratio. The results demonstrate that increasing the oxygen content reduces the plasma electron density, and the plasma will change from E mode to H mode when the discharge power increase from 350 W to 400 W if the discharge gas is pure argon or oxygen ratio is low, but the plasma is in a single E-mode at relatively high oxygen ratios. When the power reaches 450 W, the plasma becomes unstable and the state of plasma will change no matter what mode it is (H mode or E mode). In addition, as the oxygen ratio increases, there is a good agreement between the plasma electron density and the argon 738.74 nm line intensity. However, the electron temperature will decrease in H mode.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Plasma Diagnostics and Applications · Plasma Applications and Diagnostics · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. Lieberman · 2005
2. Evaluation of the effectiveness of the use of arc plasma generator with distributed parameters for the deposition of function coating at low pressures[J]10.1088/1742-6596/669/1/012006 ↗
3. Deposition of plasma-polymerized polyacrylic acid coatings by a non-equilibrium atmospheric pressure nano-pulsed plasma jet[J]10.1002/ppap.201500080 ↗
4. Inductively coupled plasma etching of poly-SiC in SF6 chemistries [J]10.1116/1.1913682 ↗
5. Diagnostic technique for measuring plasma parameters near surfaces in radio frequency discharge [J]10.1063/1.122572 ↗
6. Ion energy and angular distribution at the radio frequency biased electrode in an inductively coupled plasma apparatus [J]10.1116/1.1381404 ↗
7. Measurements and modeling of ion energy distributions in high-density, radio-frequency biased CF discharges [J]10.1063/1.1467403 ↗
8. Hippler · 2001
9. Grill · 2005
10. Characterization of argon/air atmospheric pressure capacitively coupled radio frequency dielectric barrier discharge regarding parasitic capacitor at 13.56 MHz10.1186/2251-7235-6-32 ↗
11. https://physics.nist.gov/PhysRefData/ASD/lines_form.html.
12. Direct measurement of electron density in microdischarge at atmospheric pressure by Stark Broadening[J]10.1063/1.1906299 ↗
13. HβStark broadening in cold plasmas with low electron densities calibrated with Thomson Scattering[J]10.1016/j.sab.2012.07.005 ↗
14. Comparison of methodologies for the determination of excitation temperatures of plasma support gases[J]10.1366/0003702944028290 ↗
15. Computer simulated Balmer-alpha,-beta and –gamma Stark line profiles for non-equilibrium plasmas diagnostics[J]10.1016/S0584-8547(03)00097-1 ↗
16. Modeling electromagnetic effects in capacitively coupled plasmas [J]
17. The study of influence of working pressure on mode conversion of argon radio-frequency inductively coupled plasma10.1016/j.vacuum.2016.07.022 ↗
18. Hysteresis and mode transition interims of electron energy distribution function for an inductively coupled argon discharge10.1063/1.2905213 ↗
19. Investigation in an ECR plasma chamber10.1016/S0042-207X(98)00323-6 ↗