journal article·2017-05

Convection heat transfer model and verification for the vacuum chamber during charge and discharge processes

Gang Yang, Linglong Du, Jingmin Du, Baoren Li, Xiaoyun Fu

Vacuum· Volume 139
Publisher page

Abstract

Abstract The change of temperature is obvious in the vacuum chamber during charge and discharge processes. The thermodynamic model needs to consider the convection heat transfer between air and wall in the vacuum chamber. It is the most important to get the expression of the convection heat transfer coefficient on studying the convection heat transfer model. In previous researches of the pressure chamber, the expression of the convection heat transfer coefficient was complicated and related to the Reynolds number which had no accordant calculation method. To solve these problems, an alternative approach is proposed, relating the heat transfer coefficient to the rate of change of pressure. Based on the thermodynamic model of the chamber and combined with temperature curve obtained by the stop method experiment, the convection heat transfer coefficient during charge and discharge processes in the vacuum chamber is calculated. Then, the simplified expression of the convection heat transfer coefficient by the least square method is identified. Compared with the simulated and measured pressure response curves of 0.2 L and 0.8 L vacuum chambers, the convection heat transfer model with the simplified expressions during charge and discharge processes in the vacuum chambers is proved to be effective.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Sensor Technologies Research · Hydraulic and Pneumatic Systems · Refrigeration and Air Conditioning Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. Feedback linearization-based self-tuning fuzzy proportional integral derivative control for atmospheric pressure simulator10.1177/0959651814520827 ↗
2. Heat transfer effects on dynamic pressure response of pneumatic vacuum circuit10.1115/AJTEC2011-44592 ↗
3. Decoupling control of double-level dynamic vacuum system based on neural networks and prediction principle10.1016/j.vacuum.2011.06.010 ↗
4. Modeling, identification, and control of a pneumatically actuated, force controllable robot10.1109/70.720349 ↗
5. Development of a nonlinear dynamic model for a servo pneumatic positioning system10.1109/ICMA.2005.1626520 ↗
6. Direct adaptive fuzzy control of a translating piezoelectric flexible manipulator driven by a pneumatic rodless cylinder10.1016/j.ymssp.2012.10.008 ↗
7. State feedback stabilization of an electropneumatic system10.1115/1.1286625 ↗
8. An fMRI compatible haptic interface with pneumatic actuation
9. A high performance pneumatic force actuator system: Part 1-nonlinear mathematical model10.1115/1.1286336 ↗
10. Change of the gas temperature in the course of pumping and charging in vacuum chamber
11. Almeida, Reduced-order thermodynamic models for servo-pneumatic actuator chambers10.1243/09596518JSCE203 ↗
12. Study on discharge method for measurement flow rate characteristics based on heat exchange
13. Impact of heat transfer on pressure response in vacuum chamber of pneumatic vacuum system
14. Hoiman · 2002
15. Experimental study of the convection heat transfer model of porous media for isothermal chamber during discharging10.1016/j.expthermflusci.2014.10.020 ↗
16. Measurement of mass flow rate and evaluation of heat transfer coefficient for high-pressure pneumatic components during charge and discharge processes10.1016/j.flowmeasinst.2015.08.006 ↗
17. ISO6358 · 1989
18. Determination of flow rate characteristics of pneumatic solenoid valves using an isothermal chamber10.1115/1.1667888 ↗
19. Determination of flow rate characteristics for pneumatic components during isothermal discharge by integral algorithm10.1115/1.4006623 ↗
20. GB/T 14513-93 · 1993