journal article·2001-03

Composition of the first two atomic layers in Au0.2 Cu0.8 and Au0.8Cu0.2 alloys

S. Mróz, A. Krupski

Vacuum· Volume 60· Issue 3
Publisher page

Abstract

Ratios of the M2,3VV Auger signal of copper for the alloy Au0.2Cu0.8 to that for Cu standard (hCua/hCus) and such a signal of gold for the alloy Au0.8Cu0.2 to that for Au standard (hAua/hAus), expected for particular compositions of the first and second atomic layers of alloys mentioned above and for two incidence angles (0 and 60°) of the primary electron beam in an RFA spectrometer, were calculated with the use of Monte-Carlo computer simulation of the transport of Auger electrons to the sample surface, including elastic and inelastic scattering of those electrons. These ratios were fitted to the corresponding ratios obtained from measurements, which gave the composition of the first and second atomic layers in both alloys. For the Au0.2Cu0.8 alloy, the relative atomic concentrations of copper atoms in the first and second atomic layer XCu1=0.77±0.1 and XCu2=0.93±0.5, respectively, were found while for the Au0.8Cu0.2 alloy XAu1=0.81±0.1 and XAu2=0.44±0.5 were obtained. These results were found to be almost unchanged when the inelastic mean free path of Auger electrons is varied from 0.3 to 0.5 nm and the acceptance angle of the RFA analyzer is varied from 25 to 35° in calculations mentioned above. On the other hand, the change of the measured ratios hAua/hAus or hCua/hCus by 3% changes the XAu1 or XCu1, respectively, by about 0.1. The results obtained are compared with experimental and theoretical results (concerning the AuxCu1−x polycrystalline and crystalline samples) known from the literature. A good qualitative agreement is found.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electron and X-Ray Spectroscopy Techniques · Advanced Materials Characterization Techniques · X-ray Spectroscopy and Fluorescence Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. Dowben PA, Miller A, editors. Surface segregation and related phenomena. Boca Raton, FL: CRC Press, 1990.
2. du Plessis J. Solid State Phenom 1990;11:1.10.4028/www.scientific.net/SSP.11.5 ↗
3. Holloway · Surf Interface Anal · 1992 · 18 · 25110.1002/sia.740180402 ↗
4. Mróz · Vacuum · 1997 · 48 · 36910.1016/S0042-207X(96)00291-6 ↗
5. Losch W, Kirschner J. In: Dobrozemsky R, Rudnauer F, Viehbock FP, Breth A, editors. Proceedings of the 7th International Vacuum Congress & 3rd International Conference on Solid Surfaces, Vienna, 1977. p. 2339.
6. McDavid JM, Fain Jr, SC. Surf Sci 1975; 52: 161.10.1016/0039-6028(75)90015-1 ↗
7. Mróz · Vacuum · 1998 · 49 · 10110.1016/S0042-207X(97)00140-1 ↗
8. Jablonski A, Tougaard S. NIST standard reference database 65, NIST elastic-electron-scattering cross-section database, version 1.0. US Department of Commerce, August 1996.
9. Sanchez JM, Morán-López JL. Surf Sci 1985; 157: L297.10.1016/0039-6028(85)90620-X ↗
10. Hou · Surf Sci · 1997 · 380 · 21010.1016/S0039-6028(96)01330-1 ↗
11. Hayoun · Surf Sci · 1998 · 398 · 12510.1016/S0039-6028(98)80017-4 ↗
12. Tersoff · Phys Rev B · 1990 · 42 · 1096510.1103/PhysRevB.42.10965 ↗
13. Buck · Phys Rev Lett · 1983 · 51 · 4310.1103/PhysRevLett.51.43 ↗
14. McRae · Surf Sci · 1990 · 227 · 6710.1016/0039-6028(90)90392-L ↗
15. Nakanishi · Surf Sci · 1992 · 261 · 34210.1016/0039-6028(92)90245-2 ↗
16. Sparnaay · Surf Sci · 1983 · 135 · 18410.1016/0039-6028(83)90218-2 ↗