Influence of the pulsed AMF arc control on the vacuum arc and post arc characteristic in vacuum interrupters
Source abstract
Abstract
The paper investigates the pulsed AMF arc control on the vacuum arc and the post arc characteristic to reveal the mechanism of AMF arc control in different control time and find the proper AMF arc control. The pulsed AMF control system is designed and the pulse width is adjusting from 1.5ms to 10ms. The test circuit is set up in the synthetic test and the test VI is transparency in order to observe the development of the vacuum arc by the high speed CMOS camera. The rated voltage and current of the test VI is 10kV and 25kA respectively. The post arc current of the test VI is measured to analyze the post arc characteristic, such as post arc charge, post arc conductance and dynamic dielectric strength. The developing process of vacuum arc and the post arc characteristic influenced by the pulse width, magnitude and control time of the pulsed AMF is obtained, which is useful to special magnetic contacts design.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Vacuum and Plasma Arcs · Electrical Fault Detection and Protection · Combustion and Detonation Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. Experimental investigation into the synergy of vacuum circuit breaker with double-break10.1109/TPS.2015.2502241 ↗
2. The current interruption process in vacuum analysis of the currents and voltages of current-zero measurements
3. Relationship between the voltage distribution ratio and the Post Arc current in double-break vacuum circuit breakers10.1109/TPS.2009.2015883 ↗
4. Slade · 2008
5. High-current Vacuum Arc in a strong axial magnetic field10.1109/TPS.2007.901975 ↗
6. Interaction between a vacuum arc and an axial magnetic field
7. Effect of an axial magnetic field upon the development of the vacuum arc between opening electric currents10.1109/33.219403 ↗
8. ”Estimation of critical axial magnetic field to prevent anode spots in vacuum interrupters10.1109/TPS.2014.2341744 ↗
9. Influence of the AMF arc control on voltage distribution of double-break VCBs10.1109/TPS.2016.2603532 ↗
10. A compact design for high voltage direct current circuit breaker10.1109/TPS.2009.2019979 ↗
11. Influence of contact distance on the appearance of vacuum arcs with different AMF contacts10.1109/TPS.2005.856508 ↗
12. Two dimensional simulation of post arc phenomenon in vacuum interrupter with axial magnetic field contacts
13. Investigation on the current-zero characteristic of vacuum circuit breakers10.1016/j.vacuum.2016.09.022 ↗
14. Investigation on the Vacuum Arc commutating characteristic with application to postarc current measure10.1109/TPS.2017.2651883 ↗
15. Post-arc current measurement based on current transfer characteristic10.1134/S0020441217010080 ↗
16. A novel post-arc current measuring equipment based on vacuum arc commutation and arc blow10.1088/1361-6501/aa5bea ↗
17. Research on influence of the magnetic arc blow in multi-break vacuum circuit breakers