Characterization of two-phase nickel aluminides produced by pressure-assisted combustion synthesis
Source abstract
Abstract
Abstract Two-phase (B2+L1 2 ) nickel aluminide intermetallic compounds were synthesized by the pressure-assisted volume combustion synthesis (CS). The production and characterization of the samples containing NiAl+Ni 3 Al were investigated. Aluminum (99% pure, 15 μm) and carbonyl nickel (99.8 pure, 4–7 μm) powders were used. The production of intermetallic compound was carried out at 1050 °C under 150 MPa uniaxial pressure in open air atmosphere in an electrical resistance furnace for 60 min. The formation temperature of intermetallic compound was determined by differential scanning calorimeter (DSC) analysis, and exothermic temperature of powder mixture was determined as 653 °C. The characterization of samples was confirmed by optical microscope, SEM and XRD analysis. It was observed that the structure of compound has very low porosity and the formation of NiAl was completed successfully. The relative density of test materials measured according to Archimedes’ principle was 98.04%. The microhardness of test materials was about 351 HVN 1 .
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · Advanced materials and composites · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (12)
Show source-provided references
1. Structure and properties of nonferrous alloys, intermetallics
2. Microstructure and mechanical properties of NiAl intermetallic compound synthesized by reactive sintering under pressure10.1016/S0924-0136(96)02639-8 ↗
3. Reaction process during relative sintering of NiAl10.1023/A:1004375304423 ↗
4. Dissolution–precipitation mechanism of self-propagating high-temperature synthesis of mononickel aluminide10.1016/S0966-9795(01)00046-2 ↗
5. Reaction sintering of NiAl and TiB2–NiAl composites under pressure10.1016/S0921-5093(98)00862-4 ↗
6. Grain refinement of combustion-synthesized NiAl by addition of ceramic particles10.1016/S0921-5093(97)00640-0 ↗
7. Synthesis of nickel aluminides by vacuum plasma spraying and exothermic in-situ reactions10.1016/S0921-5093(97)80109-8 ↗
8. Review: reaction synthesis processing of Ni–Al intermetallic materials10.1016/S0921-5093(00)01407-6 ↗
9. The sliding wear behavior of respectively hot pressed nickel aluminides10.1016/S0043-1648(98)00177-X ↗
10. Alman DE. Reactive sintering. Powder Metal Technol Appl. [ASM Handbook], p. 516–21.
11. Combustion synthesis of advanced materials
12. Reactive processing of nickel–aluminide intermetallic compound10.1023/A:1025956906085 ↗